Abstract
In this study, the effects of rubberwood extractives on the mechanical properties and fungal decay resistance of rubberwood-based wood plastic composites (WPCs) were explored. Three different solvents, benzene-ethanol, methanol, and deionized water, were used to remove the extractives of the rubberwood flour (RWF). The surface topographies of the prepared rubberwood-based WPC and the rubberwood itself were characterized using digital instruments and scanning electron microscopy (SEM). The results indicate that the mechanical properties of the WPC prepared using extracted RWF were higher than those of the WPC prepared with unextracted RWF. The sequences of resistance to the growth of mold on the surface of the WPC were ranked as follows: deionized-water-extracted WPC > methanol-extracted WPC > benzene-ethanol-extracted WPC > unextracted WPC. The WPC made with extracted RWF had better brown-rot resistance and worse white-rot resistance than the unextracted WPC. These results demonstrate that the removal of rubberwood extractives has a positive effect on the mechanical properties and mold and fungal decay resistance of rubberwood-based WPCs.
Author contributions: All the authors have accepted responsibility for the entire content of this submitted manuscript and approved submission.
Research funding: The work was supported by the Science and Technology Plan Projects of Guangdong Province (project nos. 2017A050501030 and 2019A050503009) and the Guangzhou Municipal Key Laboratory of Woody Biomass Functional New Materials (no. 201905010005). The financial support of the Department of Science and Technology of Guangdong Province is gratefully acknowledged.
Employment or leadership: None declared.
Honorarium: None declared.
References
ASTM D256. (1997) Standard test methods for determining the izod pendulum impact resistance of plastics. In: A.S.T.A. Materials (Ed.), Annual book of ASTM standards, West Conshohocken.Search in Google Scholar
ASTM D790. (2003) Standard test methods for flexural properties of unreinforced and reinforced plastics and electrical insulating materials. In: A.S.T.A. Materials (Ed.), Annual book of ASTM standards, Conshohocken.Search in Google Scholar
ASTM D3273. (2016) Standard test method for resistance to growth of mold on the surface of interior coatings in an environmental chamber. In: A.S.T.A. Materials (Ed.), Annual book of ASTM standards, West Conshohocken.Search in Google Scholar
Bledzki, A.K., Faruk, O. (2003) Wood fibre reinforced polypropylene composites: effect of fibre geometry and coupling agent on physico-mechanical properties. Appl. Compos. Mater. 10:365–379.10.1023/A:1025741100628Search in Google Scholar
Cherdchim, B., Satansat, J. (2016) Influences of ethylene stimulation of rubber trees (Hevea brasilliensis) on the extractives and fungal resistance of lumber. Cerne 22:223–232.10.1590/01047760201622032183Search in Google Scholar
EN 113. (1996) Wood preservatives – test method for determining the protective effectiveness against wood destroying basidiomycetes – determination of the toxic values. European Committee for Standardization, Brussels.Search in Google Scholar
Eom, T., Chaiprapat, S., Charnnok, B. (2019) Enhanced enzymatic hydrolysis and methane production from rubberwood waste using steam explosion. J. Environ. Manage. 235:231–239.10.1016/j.jenvman.2019.01.041Search in Google Scholar PubMed
Farahani, M.R.M., Banikarim, F. (2013) Effect of nano-zinc oxide on decay resistance of wood-plastic composites. Bioresources 8:5715–5720.10.15376/biores.8.4.5715-5720Search in Google Scholar
Fengel, D., Wegener, G. Wood – Chemistry, Ultrastructure, Reactions. Walter de Gruyter, Berlin, New York, 1984.10.1515/9783110839654Search in Google Scholar
Grabner, M., Muller, U., Gierlinger, N., Wimmer, R. (2005) Effects of heartwood extractives on mechanical properties of larch. IAWA J. 26:211–220.10.1163/22941932-90000113Search in Google Scholar
Gu, J., Zhang, Q., Dang, J., Zhang, J., Yang, Z. (2009) Thermal conductivity and mechanical properties of aluminum nitride filled linear low-density polyethylene composites. Polym. Eng. Sci. 49:1030–1034.10.1002/pen.21336Search in Google Scholar
Gu, J., Guo, Y., Lv, Z., Geng, W., Zhang, Q. (2015a) Highly thermally conductive POSS-g-SiCp/UHMWPE composites with excellent dielectric properties and thermal stabilities. Compos. Part A Appl. Sci. Manuf. 78:95–101.10.1016/j.compositesa.2015.08.004Search in Google Scholar
Gu, J., Li, N., Tian, L., Lv, Z., Zhang, Q. (2015b) High thermal conductivity graphite nanoplatelet/UHMWPE nanocomposites. RSC Adv. 5:36334–36339.10.1039/C5RA03284ASearch in Google Scholar
Hawley, L.F., Fleck, L.C., Richards, C.A. (1924) The relation between durability and chemical composition in wood. Ind. Eng. Chem. 16:699–700.10.1021/ie50175a015Search in Google Scholar
Jebrane, M., Pockrandt, M., Terziev, N. (2014) Natural durability of selected larch and Scots pine heartwoods in laboratory and field tests. Int. Biodeterior. Biodegradation 91:88–96.10.1016/j.ibiod.2014.03.018Search in Google Scholar
Kadir, A.A., Sudin, R. (1989) Carbohydrates in rubberwood (Hevea brasiliensis Muell.). Holzforschung 3:173–178.10.1515/hfsg.1989.43.3.173Search in Google Scholar
Kim, J., Harper, D.P., Taylor, A.M. (2009) Effect of extractives on water sorption and durability of wood-plastic composites. Wood Fiber Sci. 3:279–290.Search in Google Scholar
Liu, X. (1998) Study on rubberwood-attacking fungi and relevant controlling technology. China Wood Ind. 12:21–23 (In Chinses).Search in Google Scholar
Liu, F.P., Rials, T.G., Simonsen, J. (1998) Relationship of wood surface energy to surface composition. Langmuir 14:536–541.10.1021/la970573ySearch in Google Scholar
Ma-in, K., H-Kittikun, A., Phongpaichit, S. (2014) Application of plant essential oils in prevention of fungal growth on Para rubberwood. Eur. J. Wood Wood Prod. 72:413–416.10.1007/s00107-014-0790-zSearch in Google Scholar
Matan, N., Matan, N., Woraprayote, W., Saengkrajang, W., Sirisombat, N. (2009) Durability of rubberwood (Hevea brasiliensis) treated with peppermint oil, eucalyptus oil, and their main components. Int. Biodeterior. Biodegradation 63:621–625.10.1016/j.ibiod.2008.12.008Search in Google Scholar
Mohareb, A., Sirmah, P., Desharnais, L., Dumarçay, S., Pétrissans, M., Gérardin, P. (2010) Effect of extractives on conferred and natural durability of Cupressus lusitanica heartwood. Ann. For. Sci. 67:7.10.1051/forest/2010006Search in Google Scholar
Morrell, J.J., Stark, N.M., Pendleton, D.E., McDonald, A.G. (2006) Durability of wood–plastic composites. Wood Design Focus 16:7–10.Search in Google Scholar
Nair, S., Pandey, K.K., Giridhar, B.N., Vijayalakshmi, G. (2017) Decay resistance of rubberwood (Hevea brasiliensis) impregnated with ZnO and CuO nanoparticles dispersed in propylene glycol. Int. Biodeterior. Biodegradation 122:100–106.10.1016/j.ibiod.2017.05.008Search in Google Scholar
Naumann, A., Stephan, I., Noll, M. (2012) Material resistance of weathered wood-plastic composites against fungal decay. Int. Biodeterior. Biodegradation 75:28–35.10.1016/j.ibiod.2012.08.004Search in Google Scholar
Oldertrøen, K., H-Kittikun, A., Aam, B.B., Larnøy, E. (2017) Resistance of rubberwood (Hevea brasiliensis) treated with chitosan or silane against surface molds. Eur. J. Wood Wood Prod. 75:101–112.10.1007/s00107-016-1071-9Search in Google Scholar
Panthapulakkal, S., Kirk, D., Sain, M. (2015) Alkaline extraction of xylan from wood using microwave and conventional heating. J. Appl. Polym. Sci. 132:41330.10.1002/app.41330Search in Google Scholar
Sablík, P., Giagli, K., Pařil, P., Baar, J., Rademacher, P. (2016) Impact of extractive chemical compounds from durable wood species on fungal decay after impregnation of nondurable wood species. Eur. J. Wood Wood Prod. 74:231–236.10.1007/s00107-015-0984-zSearch in Google Scholar
Saha Tchinda, J., Pétrissans, A., Molina, S., Ndikontar, M.K., Mounguengui, S., Dumarçay, S., Gérardin, P. (2014) Study of the feasibility of a natural dye on cellulosic textile supports by red padouk (Pterocarpus soyauxii) and yellow movingui (Distemonanthus benthamianus) extracts. Ind. Crop. Prod. 60:291–297.10.1016/j.indcrop.2014.06.029Search in Google Scholar
Saha Tchinda, J., Ndikontar, M.K., Fouda Belinga, A.D., Mounguengui, S., Njankouo, J.M., Durmaçay, S., Gerardin, P. (2018) Inhibition of fungi with wood extractives and natural durability of five Cameroonian wood species. Ind. Crop. Prod. 123:183–191.10.1016/j.indcrop.2018.06.078Search in Google Scholar
Sajitha, K.L., Dev, S.A., Maria Florence, E.J. (2018) Biocontrol potential of Bacillus subtilis B1 against sapstain fungus in rubberwood. Eur. J. Plant Pathol. 150:237–244.10.1007/s10658-017-1272-zSearch in Google Scholar
Saputra, H., Simonsen, J., Li, K. (2004) Effect of extractives on the flexural properties of wood/plastic composites. Compos. Interface 11:515.10.1163/1568554042722964Search in Google Scholar
Schirp, A, Wolcott, M.P. (2005) Influence of fungal decay and moisture uptake on mechanical properties of extruded wood–plastic composites. Wood Fiber Sci. 37:643–652.Search in Google Scholar
Schirp, A., Wolcott, M.P. (2006) Fungal degradation of wood-plastic composites and evaluation using dynamic mechanical analysis. J Appl Polym Sci. 99:3138–3146.10.1002/app.22945Search in Google Scholar
Song, T., Pranovich, A., Holmbom, B. (2012) Hot-water extraction of ground spruce wood of different particle size. Bioresources 7:4214–4225.Search in Google Scholar
Taylor, A.M., Gartner, B.L., Morrell, J.J. (2002) Heartwood formation and natural durability – a review. Wood Fiber Sci. 34:587–611.Search in Google Scholar
Wang, W., Peng, Y., Dong, Y., Wang, K., Li, J., Zhang, W. (2018) Effect of coupling agent modified intumescent flame retardant on the mechanical properties, thermal degradation behavior, and flame retardancy of wood-flour/polypropylene composites. Polym. Composite 39:826–834.10.1002/pc.24004Search in Google Scholar
Wei, L., Mcdonald, A.G., Freitag, C., Morrell, J.J. (2013) Effects of wood fiber esterification on properties, weatherability and biodurability of wood plastic composites. Polym. Degrad. Stabil. 98:1348–1361.10.1016/j.polymdegradstab.2013.03.027Search in Google Scholar
Xu, K., Feng, J., Zhong, T., Zheng, Z., Chen, T. (2015) Effects of volatile chemical components of wood species on mould growth susceptibility and termite attack resistance of wood plastic composites. Int. Biodeterior. Biodegrad. 100:106–115.10.1016/j.ibiod.2015.02.002Search in Google Scholar
Yingprasert, W., Matan, N., Chaowana, P. (2015) Fungal resistance and physico-mechanical properties of cinnamon oil and clove oil-treated rubberwood particleboards. J. Trop. For. Sci. 27:69–79.Search in Google Scholar
Supplementary Material
The online version of this article offers supplementary material (https://doi.org/10.1515/hf-2019-0180).
©2020 Walter de Gruyter GmbH, Berlin/Boston
