Abstract
The peculiarities of joining a palladium alloy foil to 12Cr18Ni10Ti stainless steel by diffusion and resistance welding are considered. It is shown that both technologies can be realized only using an intermediate nickel layer with a thickness of 0.1 mm, which provides uniform strength and joint tightness and also prevents the formation of brittle intermetallic compounds. Diffusion welding allows one to obtain high-quality joints of palladium alloy to stainless steel, but this process proceeds at relatively high (950°C) temperatures and takes a long time. Resistance welding does not have these disadvantages, but the outcome significantly depends on the correct choice of welding conditions, upon which the spot weld nugget must be displaced as much as possible toward the stainless steel and the intermediate nickel layer. The connection of the palladium alloy to the intermediate layer occurs owing to mutual diffusion occurring during the passage of the welding pulse.
Similar content being viewed by others
REFERENCES
Burkhanov, G.S., Gorina, N.B., Kolchugina, N.B., Roshan, N.R., Slovetsky, D.I., and Chistov, E.M., Palladium-based alloy membranes for separation of high-purity hydrogen from hydrogen-containing gas mixtures, Platinum Met. Rev., 2011, vol. 55, no. 1, pp. 3–12.
Slovetskii, D.I. and Chistov, E.M., RF Patent 2416460, 2011.
Liushinskiy, A.V., Burkhanov, G.S., Roshan, N.R., Fedorova, E.S., and Chistov, E.M., Production of palladium filters with using of diffusion welding, Proc. XII European Cong. on Catalysis “EuroCat-2015,” August 31–September 4, 2015, Kazan, 2015.
Liushinsky, A.V., Diffuzionnaya svarka raznorodnykh materialov (Diffusion Welding of Heterogeneous Materials), Moscow: Academiya, 2006.
Kazakov, N.F., Diffuzionnaya svarka materialov (Diffusion Welding of Materials), Moscow: Mashinostroenie, 1976.
Liushinskiy, A.V., Criteria for selecting interlayers in diffusion bonding dissimilar metals, Weld. Int., 2001, vol. 15, no. 10, pp. 830–832.
Hansen, M. and Anderko, K., Constitution of Binary Alloys, New York: McGraw-Hill, 1958.
Svarka v mashinostroenie. Spravochnik (Welding in Machine Engineering: Handbook), Ol’shanskii, N.A., Ed., Moscow: Mashinostroenie, 1978, vol. 1.
Liushinskiy, A.V., Fedorova, E.S., Roshan, N.R., and Chistov, E.M., Diffusion welding of 18Cr10Ni stainless steel with Pd alloy foil, Weld. Int., 2017, vol. 31, no. 10, pp. 777–778.
Kabanov, N.S., Svarka na kontaktnykh mashinakh (Welding on Resistance Welding Machines), Moscow: Vysshaya Shkola, 1979.
Chuloshnikov, P.L., Tochechnaya i rolikovaya elektro-svarka legirovannykh staley i splavov (Spot and Seam Electric Welding of Alloyed Steels and Alloys), Leningrad: Mashinostroenie, 1978.
Kochergin, K.A., Svarka davleniem (Welding by Pressure), Leningrad: Mashinostroenie, 1972.
Author information
Authors and Affiliations
Corresponding authors
Additional information
Translated by K. Utegenov
Rights and permissions
About this article
Cite this article
Liushinsky, A.V., Burkhanov, G.S., Roshan, N.R. et al. Peculiarities of Pressure Welding of Pd Foil to Stainless Steel. Inorg. Mater. Appl. Res. 11, 681–685 (2020). https://doi.org/10.1134/S2075113320030314
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1134/S2075113320030314