Abstract

Bone marrow-derived mesenchymal stromal cells (hMSCs) are capable of differentiating into the osteogenic lineage, and for osteogenic differentiation, mechanical loading is a relevant stimulus. Mechanotransduction leads to the formation of second messengers such as cAMP, cGMP, or Ca2+ influx resulting in the activation of transcription factors mediating gene regulation. The second messengers cAMP and cGMP are degraded by phosphodiesterase isoenzymes (PDE), but the role of these enzymes during osteogenic differentiation or mechanotransduction remains unclear. Here, we focused on the isoenzyme phosphodiesterase 10A (PDE10A) and its role during osteogenic commitment and mechanotransduction. We observed a time-dependent decrease of PDE10A expression in hMSC undergoing differentiation towards the osteogenic lineage. PDE10A inhibition by papaverine diminished osteogenic differentiation. While applying mechanical strain via cyclic stretching of hMSCs led to an upregulation of PDE10A gene expression, inhibition of PDE10A using the drug papaverine repressed expression of mechanoresponsive genes. We conclude that PDE10A is a modulator of osteogenic differentiation as well as mechanotransduction in hMSCs. Our data further suggests that the relative increase of cAMP, rather than the absolute cAMP level, is a key driver of the observed effects.

1. Introduction

Bone is a complex tissue that is formed by mesoderm-derived stem cells during development. In adult organisms, it is maintained, repaired, and remodeled by skeletal and endothelial precursors residing in bone and the bone marrow [13]. Core osteogenic signaling cascades orchestrate these processes, e.g., the wnt/frizzled pathway, the TGFβ-related family of receptors with bone morphogenetic proteins (BMPs) as ligands, and type 1 parathyroid hormone receptor (PTH1R) signaling as induced by parathyroid hormone (PTH) and PTH-related peptide (PTHLH). The latter represents an important pathway that is linked to the production of the second messengers cyclic AMP (cAMP) and cyclic GMP (cGMP). The PTH1R ligand/receptor complex activates, e.g., adenylate cyclase and protein kinase A. Subsequently, the cAMP-response element-binding protein (CREB) is phosphorylated and binds to respective CRE elements in the promoters of target genes like c-fos and c-jun, RUNX2 (runx-related transcription factor 2), and BMPR2 (bone morphogenetic protein receptor II). All these factors support bone formation and fracture healing [4, 5].

Mechanical strain is also an important cue to stimulate bone formation for adaptation to environmental needs [6]. Mechanotransduction in skeletal precursor cells has been described to be cAMP-dependent and regulated by adenylyl cyclase 6 at the microdomain of the primary cilium [7]. A second cascade involving cGMP/protein kinase G signaling as a mechanoresponsive pathway in osteoblasts has also been described [8]. Mechanotransduction is, besides the abovementioned signaling pathways, a potent stimulus for osteogenic differentiation and bone formation. Sclerostin is an osteocyte-secreted potent inhibitor of osteogenic WNT signaling, and its gene SOST is addressed by physical forces [9]. For example, exercise, inhibits sclerostin production and creates a permissive environment for bone formation and repair [10, 11]. A second regulatory stimulus comes from ligand activated PTH1R osteogenic signaling. Sclerostin production is also downregulated through intermittent PTH signaling. The efficacy of PTH-induced bone formation again strongly depends on mechanical loading, thereby introducing a second level of control by mechanotransduction [12, 13].

The regulation of cAMP and cGMP as second messengers is controlled by the balance between the activity and the subcellular distribution of respective cyclases and their antagonists, the inactivating enzyme families of phosphodiesterases. The mechanisms of generation and downstream signaling have been extensively explored in general and also in bone-related signaling cascades. However, less is known about the role of intracellular cAMP/cGMP antagonists that fine-tune or blunt these signals, like members of the phosphodiesterase (PDE) protein family [14]. In the case of PTH signaling, for example, a signaling cascade involving β-arrestin recruitment induces PDE4 as an important target. In a limited number of studies, the mildly positive influence of PDE inhibitors, like the PDE4 inhibitor rolipram and the PDE5 inhibitors avanafil and sildenafil, on bone maintenance, formation, and fracture healing has already been described [1517]. The general function of phosphodiesterases is well known. They hydrolyze cyclic AMP and cyclic GMP second messenger molecules, and eleven families with variable specificity for cAMP and cGMP were described [14]. PDEs vary in their subcellular distribution, and together with kinases such as protein kinase A and with respective anchoring proteins like A kinase anchoring proteins (AKAPs), they modulate the efficacy of kinase-dependent activation of transcription factors. PDEs are involved in many relevant signaling pathways in cardiovascular and neuronal systems as well as in cancer. One of the best known examples is the PDE5 family, the inhibition of which modulates vasoconstriction [14, 18, 19].

Phosphodiesterase 10A (PDE10A) is mainly expressed in the brain, especially in neuronal cells of the striatum, with many different splice variants, and is associated with schizophrenia and neurodegenerative diseases [14, 20, 21]. The isoenzyme PDE10A has an almost 80-fold higher affinity towards cAMP (Km 56 nM) compared to the affinity of cGMP (Km 4.4 μM) [22]. In neurons, PDE10A is involved in the regulation of dopaminergic and glutamatergic signaling and treatment with the specific inhibitor papaverine leads to a marked increase of cAMP and cGMP levels [23]. PDE10A knockout animals show lower body weight than their wild-type siblings while female animals were more affected than males [24]. Consistent with the differences in body weight, PDE10A is important for the regulation of energy balance of brown and white fat cells as well as insulin resistance [25, 26]. Knockout mice also presented with decreased locomotor activity and exploratory behavior in new surroundings.

No information is available about gene regulation of PDE10A and its role in mechanotransduction and osteogenic differentiation. Here, we report on PDE10A expression profiling in skeletal precursor cells isolated from femoral heads from a patient cohort undergoing hip replacement therapy. PDE10A is mechanosensitive in skeletal precursors, and its upregulation may impair the osteogenic signals as discussed above. Our data strongly suggest that this mechanoresponsive gene is relevant for mesenchymal stromal cell biology and osteogenic differentiation and may play a role in bone regeneration.

2. Materials and Methods

2.1. Cell Culture

Media for cell culture were obtained from Thermo Fisher Scientific (Darmstadt, Germany), FCS was obtained from Bio&Sell GmbH (Ulm, Germany) [27]. Primary human mesenchymal stromal cells (hMSCs) were isolated from the bone marrow from different donors and cultivated up to four weeks by a standardized protocol [28]. Bone marrows were recovered after informed consent from the explanted femoral heads of patients undergoing elective hip arthroplasty. The procedure was approved by the local Ethics Committee of the University of Würzburg (186/18). Briefly, bone marrow preparations were washed with Dulbecco’s modified Eagle’s medium, (DMEM/F12) supplemented with 10% FCS, 100 U/ml penicillin, 0.1 mg/ml streptomycin, and 50 μg/ml ascorbate (Sigma-Aldrich GmbH, Munich, Germany), and centrifuged at 1200 rpm for 5 min. The pellet was reconstituted in medium and washed four times, and the supernatants of the washing steps containing the released cells were collected. Cells were centrifuged and cultivated at a density of cells per 175 cm2 culture flask. Adherent cells were washed after 2 days and cultivated until confluence. MSCs from mice were isolated from calvariae by using an established protocol. Briefly, calvariae were prepared and collected in PBS in a 15 ml tube. PBS was removed, and digestion solution (α-MEM containing 0.1% collagenase type Ia (Sigma-Aldrich GmbH) and 0.2% dispase grade II (Roche)) was added and incubated on a shaker for 20 min at 37°C. The cell-containing supernatant was transferred to a new 15 ml tube, and again, 2 ml of digestion solution was added, followed by a 20 min incubation period at 37°C on a shaker. Cells were again transferred to the collection tube, pelleted at 1200 rpm for 3 min, resuspended in 2 ml culture medium (α-MEM supplemented with 10% FCS and 100 U/ml PenStrep), and seeded on a 35 mm dish. MC3T3 preosteoblasts were cultivated in α-MEM plus nucleosides, supplemented with 10% FCS and 100 U/ml PenStrep. SH-SY5Y neuroblastoma cells were cultivated in Dulbecco’s modified Eagle’s medium (DMEM/F12), supplemented with 10% FCS and 50 μg/ml gentamycin (Sigma-Aldrich GmbH). All cells were grown at 37°C in a humidified atmosphere consisting of 5% CO2 and 95% air.

2.2. Preparation of Murine Brain Lysates

Whole brains from mice were prepared, shock frozen in liquid nitrogen, and pulverized with a micro dismembrator S (Sartorius). One-third was transferred to a new tube, and total RNA was isolated by using the NucleoSpin RNA II kit (Macherey-Nagel, Düren, Germany) according to the manufacturer’s instructions.

2.3. Cell Viability and Apoptosis Assays

To determine effects of the specific PDE10A inhibitor papaverine hydrochloride [2931] (Sigma-Aldrich GmbH, Schnelldorf, Germany) on viability and apoptosis, human MSCs were seeded on a 96-well plate with a density of 1000 cells/well and were treated with 1, 10, and 100 μM papaverine for 24, 48, and 72 h. Viability and apoptosis rates were assessed using the CellTiter-Glo Luminescent Cell Viability Assay and the Caspase-Glo 3/7 Assay, respectively, (both from Promega GmbH, Mannheim, Germany), according to the manufacturer’s instructions. Luminescence was measured with an Orion II Luminometer (Berthold Detection Systems, Pforzheim, Germany). Data are expressed as mean from triplicates of three independent donors.

2.4. Cyclic Stretching of hMSC

For cyclic stretching, cells per well were seeded on 4-well PU plates as described previously [32, 33] and cultivated for one week overall. 10 μM papaverine was added for 24 hours, and 1 mM db-cAMP (N6,2-O-dibutyryl-cAMP, Sigma-Aldrich GmbH, Schnelldorf, Germany) was added 1 h before stretching. The respective db-cAMP concentration was obtained from [34]. Cells were mechanically stimulated by applying 1 Hz with an extension of 1% for 30 min using a bioreactor and polyurethane dishes developed by our group [35]. Cells were harvested after 15 min and 4 h, respectively, and total RNA was isolated by using the NucleoSpin RNA II kit (Macherey-Nagel, Düren, Germany) according to the manufacturer’s instructions.

2.5. Osteogenic Differentiation of hMSC

Human MSCs were differentiated into the osteoblastic lineage by seeding cells per cm2 in 6-well plates for RNA isolation and for histochemical staining. After reaching confluence, the medium was replaced by osteogenic medium consisting of DMEM High Glucose, 10% FCS, 1 U/ml penicillin, 100 μg/ml streptomycin (all Life Technologies GmbH), 50 μg/ml L-ascorbic acid 2-phosphate, 1 μM dexamethasone, and 10 mM β-glycerophosphate (all from Sigma-Aldrich GmbH). Control cells were kept in expansion medium. Influence of papaverine hydrochloride and db-cAMP on mineralization and gene expression was tested by adding 10 μM papaverine and 1 mM db-cAMP throughout the osteogenic differentiation process. The medium was changed twice a week.

2.6. Histochemical Staining

For the detection of calcium hydrogen phosphate and hydroxylapatite in the extracellular matrix, hMSCs were fixed in methanol after 2 weeks, stained with alkaline alizarin red S (1% ) (Chroma-Schmidt GmbH, Stuttgart, Germany) for 2 min, and air dried. Microscopic images were taken at room temperature with an Axio Observer 7 microscope with a 10x/0.3 Plan Neofluar objective and an Axiocam 305 camera (all from Carl Zeiss Microimaging GmbH, Göttingen, Germany).

2.7. Isolation of RNA, RT-PCR, and Quantitative PCR

Total RNA was isolated by using the NucleoSpin RNA II kit (Macherey-Nagel, Düren, Germany) according to the manufacturer’s instructions. One microgram of total RNA was reverse-transcribed with MMLV reverse transcriptase (Promega GmbH) in a volume of 25 μl. For quantitative PCR, the cDNA was diluted 1 : 10 and qPCR was performed in 20 μl by using 2 μl of cDNA and 10 μl of the GoTaq qPCR Master Mix (Promega GmbH, Mannheim, Germany) and 0.25 pmol of sequence-specific primers obtained from biomers.net GmbH (Ulm, Germany) or Qiagen GmbH (Hilden, Germany) (see Table 1 for primer sequences and PCR conditions). qPCR conditions were as follows: 95°C for 3 min; 40 cycles: 95°C for 10 s; annealing temperature (see Table 1) for 10 s; 72°C for 10 s; followed by melting curve analysis for specificity of qPCR products. Results were calculated with the efficiency-corrected Ct model [36] with RPS27A (Ribosomal Protein S27a) as the housekeeping gene. Data were obtained from three to four independent experiments, and qPCRs were performed three times with the qPCR thermal cycler qTOWER3 (Analytik Jena AG, Jena, Germany). Differences were calculated with the ΔΔCT method; significances were obtained with the Student -test.

2.8. Western Blot

After osteogenic differentiation of hMSC for different time points with and without 10 μM papaverine, cells were washed twice with PBS and harvested in 200 μl lysis buffer (50 mM HEPES, 150 mM NaCl, 5 mM EDTA, 0.1% NP-40, 20 mM β-glycerophosphate, and 0.5 mM Na-orthovanadate, containing cOmplete™ proteinase inhibitor (Roche Diagnostics Deutschland GmbH, Mannheim, Germany)). Cells were lysed by sonification followed by centrifugation at 10000 rpm, 4°C for 10 min.

Proteins were quantified by RotiQuant assay (Carl Roth GmbH, Karlsruhe, Germany). 15 μg protein was mixed with 3.75 μl loading buffer (RotiLoad, Carl Roth GmbH) and denatured by boiling for 5 min. Samples were separated on 12% SDS polyacrylamide gels, 375 mM Tris (pH 8.8), 0.1% SDS in 192 mM glycine, and 25 mM Tris, 0.1% SDS (pH 8.8). After SDS PAGE, the gel was incubated with CAPS buffer (50 mM CAPS, 10% methanol, and 1 mM mercaptopropionic acid, pH 10.0) for 10 min. Proteins were semidry blotted for 1 h at 1 mA/cm2 at room temperature to a stabilized nitrocellulose membrane (Optitran BA-S, Schleicher and Schuell, Dassel, Germany) using a Mini Protean unit (BioRad, München, Germany). Membranes were blocked with 5% nonfat milk powder or 5% BSA in TTBS buffer (0.1 M Tris, 150 mM NaCl, and 0.1% Tween-20), respectively, and incubated with PDE10A (G-7, mouse mAB, sc-515023, 1 : 500, Santa Cruz Biotechnology, Heidelberg, Germany) and β-actin (13E5 Rabbit mAB, #4970, 1 : 1,000, Cell Signaling, Leiden, the Netherlands) primary antibodies, respectively, diluted in blocking solution overnight at 4°C. Membranes were washed 3× for 15 min with TTBS followed by an incubation for 2 h at room temperature with mIgGκ BP-HRP (sc-516102) and the secondary anti-rabbit IgG-horseradish peroxidase antibody (SH A0545 Sigma-Aldrich GmbH), respectively, diluted 1 : 2000 in TTBS solution. After another washing for 3× for 15 min with TTBS, specific staining was detected using the chemiluminescence (ECL) system (VWR International GmbH, Darmstadt, Germany). Experiments were performed with three independent donors. One representative experiment is shown.

2.9. Statistical Analyses

Statistical analyses were performed using two-tailed unpaired or paired -test, and values less than 0.05 were considered significant. All values were obtained from at least three technical replicates and expressed as . Asterisks indicate significant differences against control samples used for normalization. Further details of number of independent experiments, hMSC donors used, and selection of the normalization method are given in the figure legends.

3. Results

3.1. PDE10A Is Expressed in Human and Murine Primary MSCs and Cell Lines

To determine PDE10A transcript levels in human and murine primary MSC and cell lines, we measured its gene expression by qPCR. PDE10A mRNA was detectable, both in human primary MSC and primary MSCs isolated from murine calvariae (Figure 1) as well as murine preosteoblastic cell line MC3T3. We used human neuroblastoma cell line SH-SY5Y and murine brain lysates as positive controls for their renowned high levels of PDE10A expression.

3.2. Osteogenic Differentiation Inhibits the Expression of PDE10A

Human primary MSCs were cultivated to confluency and differentiated towards the osteogenic lineage. Total RNA and whole-cell lysates were prepared from cells harvested after 1, 10, 20, and 30 days, and the expression of PDE10A was analyzed by qPCR and Western blot. Both PDE10A gene expression and protein level were diminished after 10, 20, and 30 days of osteogenic differentiation when compared to the undifferentiated control ( and , Figure 2). To confirm that MSC developed towards the osteoblastic phenotype, we measured transcription factor RUNX2 (runt-related transcription factor 2) and early osteoblastic marker ALPL (tissue nonspecific alkaline phosphatase) expression at indicated time points after differentiation. A trend could be appreciated in the expression of RUNX2, which was increased after 10 and 20 days, and ALPL, which was slightly enhanced after 10 days, due to high donor variabilities.

3.3. PDE10A Inhibition Does Not Affect Cell Viability and Apoptosis Rates of hMSCs

In a next step, we blocked PDE10A activity by using the specific inhibitor papaverine in hMSCs. To identify the optimal concentration for PDE10A inhibition without affecting cell viability, hMSC were treated with 1, 10, and 100 μM papaverine. Cell viability and the apoptosis rate were determined after 24, 48, and 72 h, respectively. While papaverine did not induce apoptosis, it diminished cell viability at 100 μM after 48 and 72 h (, Figures 3(a) and 3(b)). Therefore, in all other experiments, 10 μM papaverine for PDE10A inhibition was used as with this dose, no effects on cell viability were observed.

3.4. Inhibition of PDE10A Impairs Osteogenic Differentiation of hMSC

To analyze if PDE10A is relevant for osteogenic differentiation, primary MSCs were differentiated towards the osteogenic lineage for 14 days and the specific PDE10A inhibitor papaverine or db-cAMP was added to the osteogenic cocktail, respectively. After 14 days of differentiation, the osteogenic marker genes SPP1 (secreted phosphoprotein 1), RUNX2, and ALPL were analyzed by qPCR as well as mineral deposition by alizarin red staining. As expected, osteogenic marker genes were increased after osteogenic differentiation. While RUNX2 was only slightly upregulated and with high donor variability, ALPL and SPP1 were significantly enhanced. By contrast, the addition of papaverine or db-cAMP prevented the osteogenic upregulation of RUNX2, SPP1 (), and ALPL (). Papaverine or db-cAMP also showed effects in undifferentiated cells and reduced the expression of SPP1 and ALPL ( and , Figure 4(a)). The inhibition of osteogenic differentiation by papaverine or db-cAMP could also be verified by alizarin red staining. After 14 days of differentiation, mineral deposition was detectable in primary MSC, which was largely diminished in the presence of papaverine and db-cAMP, respectively (Figure 4(b)).

As dexamethasone (Dex) is a component of the osteogenic differentiation cocktail, we investigated if PDE10A was Dex responsive in hMSC and therefore treated hMSC with 1 μM Dex but no effect on PDE10A mRNA expression could be detected (Suppl. Figure 1). In addition, papaverine did not influence the expression of PDE10A (Suppl. Figure 1).

3.5. PDE10A Is a Mechanoresponsive Gene in MSC

Mechanical strain is a key stimulus for osteogenic differentiation. To clarify if PDE10A is specifically responsive to mechanical strain in osteogenic precursors, human primary MSCs from 13 donors were seeded on polyurethane (PU) dishes and mechanical strain (1 Hz frequency, 1% extension) was applied. Whereas expression of PDE10A was increased 4 h after mechanical loading (; Figure 5, white bars), no such increase was observed early after 15 min. To confirm that primary MSCs are mechanosensitive and respond to cyclic stretching, we measured the expression of the mechanoresponsive genes, PTGS2 (prostaglandin-endoperoxide synthase 2) and FOS (fos protooncogene) [38, 39] in the same donors 15 min and 4 h after mechanical loading (Figure 5, black and grey bars). In contrast to PDE10A, PTGS2 and FOS were induced early after 15 min () and the expression of PTGS2 and FOS declined to baseline 4 h after cyclic stretching, as we have reported before [33]. RPS27A was used as the housekeeping gene, which we used in former studies [33] and was not responding to cyclic stretching (data not shown). QPCR revealed time-dependent induction of PTGS2, FOS, and PDE10A while all donors responded to cyclic strain and were mechanoresponsive.

3.6. Inhibition of PDE10A Modulates Mechanoresponse in MSC

We have shown that PDE10A inhibition by papaverine causes the repression of the osteogenic marker genes SPP1, RUNX2, and ALPL and that PDE10A expression is induced after mechanical strain. Therefore, we asked if PDE10A inhibition has an impact on mechanotransduction in primary MSCs. To this end, we seeded cells of five different donors in PU dishes and pretreated them with 10 μM of the PDE10A inhibitor papaverine for 24 h. Additionally, we used 1 mM db-cAMP for 1 h to increase intracellular cAMP concentrations. Subsequently, we applied mechanical strain (1 Hz frequency, 1% extension) and analyzed the expression of the mechanoresponsive genes PTGS2 and FOS after 15 min, as well as PDE10A after 4 h, by qPCR. The mechanoresponse of PTGS2 and FOS was diminished by db-cAMP (; Figure 6). Papaverine pretreatment reduced the mechanoresponse of FOS (), and a trend could be appreciated in the downregulation of PTGS2. No effect of papaverine could be seen on the expression of PDE10A in this context. By applying db-cAMP, the mechanoresponse of PDE10A was increased by the factor 2.5 ().

4. Discussion

In this paper, we analyzed the expression and regulation of phosphodiesterase 10A (PDE10A) during osteogenic differentiation and mechanotransduction in primary human bone marrow-derived mesenchymal stromal cells (hMSCs). PDE10A belongs to the family of PDE isoenzymes, which degrade second messengers by hydrolyzing the 3 cyclic phosphate bonds of cAMP and cGMP. The isoenzyme PDE10A exhibits an almost 80-fold higher affinity towards cAMP (Km 56 nM) compared to the affinity reported for cGMP (Km 4.4 μM) [22], and therefore, we hypothesize that the here discussed results are largely dependent on modulating cAMP concentrations, while cGMP plays only a minor role.

In neurons, PDE10A is involved in the regulation of dopaminergic and glutamatergic signaling [23]. As PDE10A is well known to be expressed in neuronal tissues, we used murine brain lysates and the neuroblastoma cell line SH-SY5Y as positive controls in qPCR experiments. PDE10A mRNA expression could be detected in hMSC, murine primary MSC (mMSC), and the murine preosteoblastic cell line MC3T3, although to a much lesser extent compared to the expression in neuronal cells and tissues. Ahlstrom et al. investigated the expression of 15 different PDE family members and subtypes in SaOS-2 and MG-63 osteosarcoma as well as normal human osteoblastic (NHOst) cells, but PDE10A was only present in MG-63 cells [40, 41]. Therefore, our paper contributes to the existing reports and extends the knowledge about the expression and function of PDE10A in human bone marrow-derived stromal cells and osteogenic precursors.

Differentiation of hMSC towards the osteogenic lineage revealed time-dependent downregulation of PDE10A mRNA and protein. For dexamethasone (Dex), it was reported that it inhibits the expression of PDE family members, including PDE10A [41]. We hypothesize that the decrease of PDE10A expression during osteogenic commitment is an effect of the differentiation process itself as we did not observe dexamethasone effects in hMSC. Our data suggest that cAMP levels are low in the initial phase of osteogenic commitment, due to a higher expression of PDE10A, and are increased during osteogenic commitment due to a decrease of PDE10A expression. This is in line with the PDE10A expression pattern in osteosarcoma cells mentioned above, where MG-63, negative for ALP and less mature, are positive for PDE10A, and SaOS-2 cells, positive for ALP and more mature, are negative for PDE10A [41, 42]. In murine MSC and embryonic stromal cells, it was shown that during the early phase of osteogenic differentiation, the activation of adenylate cyclase via forskolin treatment led to an inhibition of mineralization [43], while generally lowering cAMP concentrations, by stimulating cells with 2,5-didesoxyadenosine, increased osteogenic differentiation [44]. In contrast, it was shown that pretreating MSC with forskolin before adding the osteogenic differentiation cocktail increased their osteogenic potential [43]. Enhanced osteogenic differentiation capacity was also reported for murine ST-2 stromal cells after selectively inhibiting PDE2, PDE3, and PDE4, which could not be verified in preosteoblastic MC3-T3 cells [45]. These reports indicate that fine-tuning of cAMP levels by PDE isoenzymes is relevant for the early phase of osteogenic commitment although their role during osteogenic differentiation is not fully understood.

As none of the here mentioned papers focused on the function of PDE10A, we intended to decipher its role during osteogenic differentiation by using a specific PDE10A inhibitor, namely, papaverine. Papaverine (1-(3,4-dimethoxybenzyl)-6,7-dimethoxyisoquinoline), the only clinically used PDE10A inhibitor so far, has an IC50 value of 36 nM for PDE10A and was described as highly specific for PDE10A [29, 46]. We excluded cytotoxic effects of papaverine at concentrations up to 10 μM and used this dosage for all other experiments. PDE10A inhibition blunted the expression of osteogenic markers and reduced the mineralization rate of hMSC under osteogenic conditions, as did the stimulation with high nonphysiological cAMP levels obtained upon db-cAMP treatment. As mentioned above, in ES cells, high levels of cAMP during the early phase of osteogenic commitment are disadvantageous [44] and this is in line with our observations. Additionally, it was shown in rodent models that signaling via cAMP and protein kinase A inhibits osteogenic differentiation and bone formation [47] and that intermittent cAMP accumulation is correlated to an inhibition of osteogenesis [34]. However, the same group reported that high nonphysiological concentrations of cAMP—which in their opinion cannot be achieved by stimulating cells with natural GPCR ligands as, for example, PTH—are beneficial for osteogenic differentiation of human MSCs [48]. The same holds true for a continuous rise in cAMP levels or the continuous activation of PKA with db-cAMP [34]. The authors summarize that cAMP can exert a positive as well as a negative effect on osteogenic differentiation, and they conclude that not the cAMP concentration itself was the responsible trigger for cell fate decision but the respective time frame of application and duration [34]. We intended to determine cAMP levels after treating hMSC with papaverine by using two different commercially available cAMP assays. One was an immunobased assay, and the other one determined cAMP levels by measuring the activity of protein kinase A. We were unable to detect cAMP levels or cAMP variations in hMSC due to a lack of sensitivity of the used assays. Nevertheless, our data presented in this paper support the hypothesis that the regulation and fine-tuning of cAMP levels are crucial for osteogenic commitment and that PDE10A is a main player in this context.

Mesenchymal fate decision and especially osteogenic differentiation are also influenced by mechanotransduction following, e.g., cyclic stretching or fluid flow. Mechanical forces are translated into biochemical signals via integrins and calcium channels associated to the cell membrane and the primary cilium [6, 49]. Mechanotransduction results in the nuclear translocation and activation of transcription factors that bind to mechanoresponsive DNA elements, e.g., AP-1, SP-1 sites, or other shear stress DNA-response elements [35, 50, 51]. In MSC, it was shown that mechanotransduction is sensed by the primary cilium and regulated by adenylyl cyclase 6 and the second messenger cAMP [7]. Fluid shear stress is also mediated via cGMP in osteoblastic cells leading to the activation of cGMP-dependent protein kinase [52]. As PDE10A is involved in the degradation of cAMP and to a lesser extent of cGMP, we investigated if PDE10A is mechanoresponsive in hMSC. As we have reported before, the immediate-early genes FOS and PTGS2 are upregulated within 15 min after the application of mechanical strain [33]. After 4 h, we found an upregulation of PDE10A expression in these cells, suggesting that the second messenger cAMP, which might be responsible for the upregulation of FOS and PTGS2, is degraded by PDE10A. We hypothesize that not only during osteogenic differentiation but also in mechanotransduction the time-frame or duration of cAMP signaling is important for the activation of signaling cascades. Papaverine blunted the mechanical load-driven upregulation of FOS and PTGS2. This suggests that cAMP increases through the inhibition of its catabolism and mechanotransduction-related cAMP increase, cooperate, and may even replace each other at least as far as immediate-early gene regulation is concerned. PDE10A was reported also to be mechanoresponsive in pulmonary arterial smooth muscle cells of a rat model for pulmonary hypertension. The inhibition of PDE10A with papaverine attenuated the effects on pulmonary hypertensive hemodynamic parameters and pulmonary vascular remodeling [31]. However, in hMSC, the upregulation of PDE10A itself by mechanical loading could not be blunted by papaverine treatment and stimulation with db-cAMP even increased the expression of PDE10A, indicating that mechanoresponsive upregulation of PDE10A itself is regulated by cAMP only when nonphysiological high concentrations are applied. Under physiological conditions, cAMP plays only a minor role, indicating that alternative second messengers and signaling pathways might be involved.

5. Conclusion

PDE10A is a relevant modulator of osteogenic differentiation in skeletal precursors. Specific PDE10A inhibition using papaverine diminishes osteogenic differentiation and in vitro mineralization. In addition, PDE10A gene expression is itself mechanoresponsive and its function modulates cellular mechanotransduction particularly with respect to immediate-early gene regulation. This paper extends the knowledge about the function of PDE10A in human bone marrow-derived stromal cells and osteogenic precursors. Future research will certainly unravel its role in the maintenance and adaptation of bone mass according to environmental needs in health and disease.

Data Availability

The raw data of the qPCR and viability assays used to support the findings of this study are available from the corresponding author upon request.

Conflicts of Interest

There is no conflict of interest.

Authors’ Contributions

Regina Ebert and Franz Jakob contributed equally.

Acknowledgments

This work was supported by the Bundesministerium für Bildung und Forschung (BMBF) grant 01EC1402C (DIMEOs) and by the Europäischer Fonds für regionale Entwicklung (EFRE) grant EU-1650-0006 to F. Jakob and by the Deutsche Forschungsgemeinschaft (DFG, German Research Foundation)-Projektnummer 326998133-TRR 225 (subproject B05, R. Ebert). We thank Dr. Stephanie Graser for preparing the brain lysates.

Supplementary Materials

Suppl. Figure 1: expression of PDE10A in primary hMSC after treatment with dexamethasone and papaverine. (Supplementary materials)