Abstract
Coastal erosion is accelerating due to global warming, thus weakening infrastructures and threatening the population. Actual remediation techniques are costly, resource-consuming and vulnerable. Here, we designed the synthesis of a carbonate rock by seawater electrolysis to reinforce engineering infrastructures. Inspired by electrochemical cathodic protection, the new technique involves the application of a low current in a buried metal grid to precipitate aragonite (CaCO3) and brucite (Mg(OH)2), which agglomerate the metal grid with the sediment. We tested the effects of power surface densities, 3 and 5 W/m2, on agglomerate properties during more than 2 years in natural conditions. We measured agglomerate thickness, accessible water porosity and axial compressive strength. The results show growth rates of 2.5 mm/month at 3 W/m2 and 4.1 mm/month at 5 W/m2 during the first 32 months. Data on material properties do not show a significant effect of power surface density. Maximum porosity of 16% is reached after 12 months, and maximum compressive strength of 10 MPa is obtained after 18 months. Overall, our findings confirm under outdoor conditions the practical application of electrochemical limestone synthesis for reinforcement of the coastal infrastructures.
Similar content being viewed by others
References
Adger WN, Hughes TP, Folke C et al (2005) Social-ecological resilience to coastal disasters. Science 80(309):1036–1040
AFPC-AFREM (1997), Durabilité des bétons—Méthodes recommandées pour la mesuredes grandeurs relatives à la durabilité, in: Proceedings of the Technical Meeting AFPC-AFREM, Toulouse, France (in French)
Barchiche C, Deslouis C, Festy D et al (2003) Characterization of calcareous deposits in artificial seawater by impedance techniques: 3—deposit of CaCO3 in the presence of Mg(II). Electrochim Acta 48:1645–1654. https://doi.org/10.1016/S0013-4686(03)00075-6
Barchiche C, Deslouis C, Gil O et al (2004) Characterisation of calcareous deposits by electrochemical methods: role of sulphates, calcium concentration and temperature. Electrochim Acta 49:2833–2839. https://doi.org/10.1016/j.electacta.2004.01.067
Barchiche C, Deslouis C, Gil O et al (2009) Role of sulphate ions on the formation of calcareous deposits on steel in artificial seawater; the formation of Green Rust compounds during cathodic protection. Electrochim Acta 54:3580–3588. https://doi.org/10.1016/j.electacta.2009.01.023
Béoutis A, Jean P, Colas S (2004) L’Observatoire du littoral. Démographie et économie du littoral
Brunel C, Sabatier F (2009) Potential influence of sea-level rise in controlling shoreline position on the French Mediterranean Coast. Geomorphology 107:47–57. https://doi.org/10.1016/j.geomorph.2007.05.024
Carré C, Gunkel-Grillon P, Serres A et al (2017) Calcareous electrochemical precipitation, a new method to trap nickel in seawater. Environ Chem Lett 15:151–156. https://doi.org/10.1007/s10311-016-0602-2
Carré C, Gunkel-Grillon P, Serres A, Jeannin M, Sabot R, Quiniou T (2019) Laboratory and in situ investigations for trapping Pb and Ni with an unusual electrochemical device, the calcareous deposit in seawater. Sci Rep 9(1):3–10. https://doi.org/10.1038/s41598-019-40307-0
Carré C, Zanibellato A, Jeannin M et al (2020) Electrochemical calcareous deposition in seawater. A review. Environ Chem Lett. https://doi.org/10.1007/s10311-020-01002-z
Deslouis C, Festy D, Gil O et al (1998) Characterization of calcareous deposits in artificial seawater by impedance techniques: i. deposit of CaCO3 without Mg(OH)2. Electrochim Acta 43:1891–1901. https://doi.org/10.1016/S0013-4686(97)00303-4
Deslouis C, Festy D, Gil O et al (2000) Characterization of calcareous deposits in artificial seawater by impedances techniques: ii. deposit of Mg(OH)2 without CaCO3. Electrochim Acta 45:1837–1845. https://doi.org/10.1016/S0013-4686(99)00403-X
Erftemeijer PLA, Robin Lewis RR (2006) Environmental impacts of dredging on seagrasses: a review. Mar Pollut Bull 52:1553–1572. https://doi.org/10.1016/j.marpolbul.2006.09.006
European Commission (2009) The economics of climate change adaptation in EU coastal areas—main report
Frihy OE (2001) The necessity of environmental impact assessment (EIA) in implementing coastal projects: lessons learned from the egyptian mediterranean coast. Ocean Coast Manag 44:489–516. https://doi.org/10.1016/S0964-5691(01)00062-X
Genter A, Duperret A, Martinez A et al (2004) Multiscale fracture analysis along the French chalk coastline for investigating erosion by cliff collapse. Geol Soc Lond Eng Geol Spec Publ 20:57–74. https://doi.org/10.1144/GSL.ENG.2004.020.01.04
Hartt WH, Culberson CH, Smith SW (1984) Calcareous deposits on metal surfaces in seawater—a critical review. Corrosion 40:609–618
IPCC (Intergovernmental Panel On Climate Change) (1990) Strategies for adaption to sea level rise
IPCC (Intergovernmental Panel On Climate Change) (2007) Climate change 2007 synthesis report. Switzerland, Geneva
Mantel KE, Hartt WH, Chen T-Y (1992) Substrate, surface finish, and flow rate influences on calcareous deposit structure. Corrosion 48:489–500
Mentaschi L, Vousdoukas MI, Pekel J-F et al (2018) Global long-term observations of coastal erosion and accretion. Sci Rep 8:12876. https://doi.org/10.1038/s41598-018-30904-w
Ministère de la transition écologique et solidaire (2017) Indicateur national de l’érosion côtière. http://www.geolittoral.developpement-durable.gouv.fr/premiers-enseignements-r476.html. Accessed 28 Sep 2018
Neville A, Morizot AP (2002) Calcareous scales formed by cathodic protection—an assessment of characteristics and kinetics. J Cryst Growth 243:490–502. https://doi.org/10.1016/s0022-0248(02)01532-4
NF EN 1097-3 (1998) Tests for mechanical and physical properties of aggregates, part 3: déerminaration of loos density and voids
NF EN 1097-6 (2014) Tests for mechanical and physical properties of aggregates, part 6: Determination of particle density and water absorption
NF EN 933-1 (2012) Test for geometrical properties of aggregates, part 1: Determination of partice size distribution—sieving method
Nguyen Dang D, Gascoin S, Zanibellato A et al (2017) Role of brucite dissolution in calcium carbonate precipitation from artificial and natural seawaters. Cryst Growth Des 17:1502–1513. https://doi.org/10.1021/acs.cgd.6b01305
Nordstrom KF (2014) Living with shore protection structures: a review. Estuar Coast Shelf Sci 150:11–23. https://doi.org/10.1016/j.ecss.2013.11.003
Oates JAH (1998) Lime and limestone, chemistry and technology. Production and Uses, Weinheim
Pranzini E (2017) Coastal erosion and shore protection: a brief historical analysis. J Coast Conserv. https://doi.org/10.1007/s11852-017-0521-9
Rousseau C, Baraud F, Leleyter L et al (2010) Calcareous deposit formed under cathodic protection in the presence of natural marine sediments: a 12 months experiment. Corros Sci 52:2206–2218. https://doi.org/10.1016/j.corsci.2010.02.047
Stoddart DR, Cann JR (1965) Nature and origin of beach rock. J Sediment Petrol 35:243–273. https://doi.org/10.1306/74D7122B-2B21-11D7-8648000102C1865D
von Baeckmann W, Schwenk W, Prinz W (1997) Handbook of cathodic corrosion protection—theory and practice of electrochemicalprotection processes, 3rd edn. Gulf Professional Publishing, Elsevier S
Yang Y, Scantlebury J, Koroleva E (2015) A Study of calcareous deposits on cathodically protected mild steel in artificial seawater. Metals (Basel) 5:439–456. https://doi.org/10.3390/met5010439
Zamanzade M, Shahrabi T, Yazdian A (2007) Improvement of corrosion protection properties of calcareous deposits on carbon steel by pulse cathodic protection in artificial sea water. Anti-Corr Methods Mater 54:74–81. https://doi.org/10.1108/00035590710733566
Zanibellato A, Verjat N, Andreani P, Solesio J (2018) Le Geocorail : un matériau innovant pour la lutte contre l’érosion et le renforcement d’ouvrage maritime. In: XVèmes Journées Nationales Génie Côtier - Génie Civil. La Rochelle, pp 505–512
Acknowledgements
The authors would like to acknowledge Sarah Becker and Milena Barras, two trainees from Geocorail company who took part in carrying out the experimental tests. The authors are also grateful to Bruno Peraudeau, technician from LaSIE for his help on the experimental site.
Author information
Authors and Affiliations
Corresponding author
Additional information
Publisher's Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
About this article
Cite this article
Carré, C., Zanibellato, A., Achgare, N. et al. Electrochemical limestone synthesis in seawater binds metal grids and sediments for coastal protection. Environ Chem Lett 18, 1685–1692 (2020). https://doi.org/10.1007/s10311-020-01019-4
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10311-020-01019-4