Issue 26, 2020

A radially controlled ZnS interlayer on ultra-long ZnO–Gd2S3 core–shell nanorod arrays for promoting the visible photocatalytic degradation of antibiotics

Abstract

Nanorod (NR) arrays offer commendable visible-light-driven photocatalytic performances. Herein, we describe the construction of a ternary ZnO–ZnS–Gd2S3 nanostructural array in which a sulfidation process is used to decorate a Gd2S3 shell layer with a ZnS interface over vapor-phase-grown vertically-aligned ZnO. With control over the shell-wall thickness, the shell layer of ∼25 nm wall thickness on the ultra-long ZnO NR arrays exhibited a higher catalytic efficiency close to 3.3, 2.0, 1.2, and 1.8 times those of the bare ZnO, the ZnO–ZnS, the Gd2S3-decorated (∼10 nm) and Gd2S3 shell-layered (∼40 nm) ZnO–ZnS core–shell structures, respectively. The core–shell geometry and the shell-wall thickness with maximized contact interface afforded increased light absorption in the visible region and effectively retarded the recombination rate of the photoinduced charge carriers by confining electrons and holes separately, thus providing advantages in terms of the degradation of the pharmaceutical residue tetracycline and the industrial pollutant 4-nitrophenol in wastewater.

Graphical abstract: A radially controlled ZnS interlayer on ultra-long ZnO–Gd2S3 core–shell nanorod arrays for promoting the visible photocatalytic degradation of antibiotics

Supplementary files

Article information

Article type
Paper
Submitted
20 Apr 2020
Accepted
04 Jun 2020
First published
04 Jun 2020

Nanoscale, 2020,12, 14047-14060

A radially controlled ZnS interlayer on ultra-long ZnO–Gd2S3 core–shell nanorod arrays for promoting the visible photocatalytic degradation of antibiotics

K. S. Ranjith, D. Ranjith Kumar, S. M. Ghoreishian, Y. S. Huh, Y. Han and R. T. Rajendra Kumar, Nanoscale, 2020, 12, 14047 DOI: 10.1039/D0NR03094E

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements