Abstract
We examine whether the combination of tectonic stress and strain is useful in characterizing tectonic condition and geomechanics of sedimentary basins. We compile measured stress, pore pressure, and mechanical rock property data from six major sedimentary basins worldwide. We find that the measured horizontal principal stresses are always higher than the theoretically calculated stresses based on a simple uniaxial compaction poroelastic equation, known as Eaton’s model. From this we conclude that there are always external tectonic stresses in seemingly stable basins. We extract these external tectonic stresses by subtracting the theoretically calculated horizontal stresses from the measured horizontal stresses, and relate them to the tectonic strains estimated by the linear elastic constitutive model. Given the external tectonic stresses and associated strains, we interpret the tectonic conditions of individual basins from the tectonic differential stress and strain conditions. The six basins exhibit distinct tectonic stress and strain regimes, which can be related generally to geological processes such as brittle and ductile deformation. The results show that combining tectonic stress and strain is useful in characterizing sedimentary basins.
Similar content being viewed by others
References
Ahmadian, J., Murata, M., Nadimi, A., Ozawa, H., and Kozai, T., 2014, Active tectonics of Iran deduced from earthquakes, active faulting and GPS evidences. Bulletin of Center for Collaboration in Community Naruto University of Education, 28, 11–22.
Ahmed, U., Markley, M.E., and Crary, S.F., 1991, Enhanced in situ stress profiling with microfracture core and sonic-logging data. SPE Formation Evaluation, 6, 243–251. https://doi.org/10.2118/19004-PA
Binh, N.T.T., Tokunaga, T., Son, H.P., and Van Binh, M., 2007, Present-day stress and pore pressure fields in the Cuu Long and Nam Con Son Basins, offshore Vietnam. Marine and Petroleum Geology, 24, 607–615. https://doi.org/10.1016/j.marpetgeo.2007.04.002
Binh, N.T.T., Tokunaga, T., Goulty, N.R., Son, H.P., and Van Binh, M., 2011, Stress state in the Cuu Long and Nam Con Son basins, offshore Vietnam. Marine and Petroleum Geology, 28, 973–979. https://doi.org/10.1016/j.marpetgeo.2011.01.007
Biot, M.A., 1941, General theory of three-dimensional consolidation. Journal of Applied Physics, 12, 155–164. https://doi.org/10.1063/1.1712886
Blanton, T.L. and Olson, J.E., 1999, Stress magnitudes from logs: effects of tectonic strains and temperature. SPE Reservoir Evaluation and Engineering, 2, 62–68. https://doi.org/10.2118/54653-PA
Brown, A., Allen, T., and Gibson, G., 2001, Seismicity and earthquake hazard in Gippsland, Victoria, Proceedings of the Australian Earthquake Engineering Society Conference on Earthquake Codes in the Real World, Canberra, Nov. 20–22, Paper 22.
Byerlee, J., 1978, Friction of rocks. Pure and Applied Geophysics, 116, 615–626.
Eaton, B.A., 1969, Fracture gradient prediction and its application in oilfield operations. Journal of Petroleum Technology, 21, 1353–1360. https://doi.org/10.2118/2163-PA
Engelder, T., 2014, Stress Regimes in the Lithosphere. Princeton University Press, Princeton, 457 p.
Engelder, T. and Fischer, M.P., 1994, Influence of poroelastic behavior on the magnitude of minimum horizontal stress, Sh, in overpressured parts of sedimentary basins. Geology, 22, 949–952. https://doi.org/10.1130/0091-7613(1994)022<0949:IOPBOT>2.3.CO;2
Fossen, H., 1989, Indication of transpressional tectonics in the Gullfaks oil-field, northern North Sea. Marine and Petroleum Geology, 6, 22–30. https://doi.org/10.1016/0264-8172(89)90073-1
Fossen, H. and Hesthammer, J., 1998, Structural geology of The Gullfaks Field, northern North Sea. In: Coward, M.P., Daltaban, T.S., and Johnson, H. (eds.), Structural Geology in Reservoir Characterization. Geological Society, London, Special Publications, 127, p. 231–261. https://doi.org/10.1144/GSL.SP.1998.127.01.16
Gholami, R., Moradzadeh, A., Rasouli, V., and Hanachi, J., 2014, Practical application of failure criteria in determining safe mud weight windows in drilling operations. Journal of Rock Mechanics and Geotechnical Engineering, 6, 13–25. https://doi.org/10.1016/j.jrmge.2013.11.002
Gibson-Poole, C.M., Svendsen, L., Underschultz, J., Watson, M.N., Ennis-King, J., Van Ruth, P.J., Nelson, E.J., Daniel, R.F., and Cinar, Y., 2006, Gippsland Basin geosequestration: a potential solution for the Latrobe Valley brown coal CO2 emissions. Australian Petroleum Production and Exploration Association Journal, 46, 413–433. https://doi.org/10.1071/AJ05024
Gjønnes, M., Cruz, A.M.G.L., Horsrud, P., and Holt, R.M., 1998, Leak-off tests for horizontal stress determination? Journal of Petroleum Science and Engineering, 20, 63–71. https://doi.org/10.1016/S0920-4105(97)00053-3
Gholami, R., Moradzadeh, A., Rasouli, V., and Hanachi, J., 2014, Practical application of failure criteria in determining safe mud weight windows in drilling operations. Journal of Rock Mechanics and Geotechnical Engineering, 6, 13–25.
Gray, D., Anderson, P., Logel, J., Delbecq, F., Schmidt, D., and Schmid, R., 2012, Estimation of stress and geomechanical properties using 3D seismic data. First Break, 30, 59–68. https://doi.org/10.3997/1365-2397.2011042
Grollimund, B., Zoback, M.D., Wiprut, D.J., and Arnesen, L., 2001, Stress orientation, pore pressure and least principal stress in the Norwegian sector of the North Sea. Petroleum Geoscience, 7, 173–180. https://doi.org/10.1144/petgeo.7.2.173
Haghi, A.H., Kharrat, R., Asef, M.R., and Rezazadegan, H., 2013, Present-day stress of the central Persian Gulf: implications for drilling and well performance. Tectonophysics, 608, 1429–1441. https://doi.org/10.1016/j.tecto.2013.06.001
Hoek, E. and Brown, E.T., 1980, Underground Excavations in Rock. Institution of Mining and Metallurgy, London, 527 p.
Jaeger, J.C., Cook, N.G., and Zimmerman, R., 2009, Fundamentals of rock mechanics. John Wiley and Sons, Hoboken, 488 p.
Japan International Cooperation Agency, 2015, Country report Brunei: natural disaster risk assessment and area business continuity plan formulation for industrial agglomerated areas in the ASEAN region. 61 p. http://open_jicareport.jica.go.jp/pdf/1000023399.pdf
Karig, D. and Morgan, J., 1994, Tectonic deformation: stress paths and strain histories. In: Maltman, A. (ed.), The Geological Deformation of Sediments. Springer, Dordrecht, p. 167–204.
Konstantinovskaya, E., Malo, M., and Castillo, D.A., 2012, Present-day stress analysis of the St. Lawrence Lowlands sedimentary basin (Canada) and implications for caprock integrity during CO2 injection operations. Tectonophysics, 518, 119–137. https://doi.org/10.1016/j.tecto.2011.11.022
Lamontagne, M., Keating, P., and Perreault, S., 2003, Seismotectonic characteristics of the Lower St. Lawrence Seismic Zone, Quebec: insights from geology, magnetics, gravity, and seismics. Canadian Journal of Earth Sciences, 40, 317–336. https://doi.org/10.1139/e02-104
Li, Q., Xing, H., Liu, J., and Liu, X., 2015, A review on hydraulic fracturing of unconventional reservoir. Petroleum, 1, 8–15. https://doi.org/10.1016/j.petlm.2015.03.008
Marrett, R. and Peacock, D.C., 1999, Strain and stress. Journal of Structural Geology, 21, 1057–1063.
Morley, C.K., Tingay, M., Hillis, R., and King, R., 2008, Relationship between structural style, overpressures, and modern stress, Baram Delta Province, northwest Borneo. Journal of Geophysical Research: Solid Earth, 113, 1–23. https://doi.org/10.1029/2007JB005324
Morrow, C.A., Moore, D.E., and Lockner, D.A., 2000, The effect of mineral bond strength and adsorbed water on fault gouge frictional strength. Geophysical Research Letter, 27, 815–818. https://doi.org/10.1029/1999GL008401
Nelson, E.J. and Hillis, R.R., 2005, In situ stresses of the West Tuna area, Gippsland Basin. Australian Journal of Earth Sciences, 52, 299–313. https://doi.org/10.1080/08120090500139430
Nelson, E.J., Meyer, J.J., Hillis, R.R., and Mildren, S.D., 2005, Transverse drilling-induced tensile fractures in the West Tuna area, Gippsland Basin, Australia: implications for the in situ stress regime. International Journal of Rock Mechanics and Mining Sciences, 42, 361–371. https://doi.org/10.1016/j.ijrmms.2004.12.001
Raaen, A.M., Horsrud, P., Kjørholt, H., and Økland, D., 2006, Improved routine estimation of the minimum horizontal stress component from extended leak-off tests. International Journal of Rock Mechanics and Mining Sciences, 43, 37–48. https://doi.org/10.1016/j.ijrmms.2005.04.005
Ringdal, F., 1983, Seismicity of the North Sea area. In: Ritsema, A.R. and Grupinar, A. (eds.), Seismicity and Seismic Risk in the Offshore North Sea Area. D. Reidel Publishing Company, Dordrecht, p. 53–75.
Scholz, C.H., 2019, The Mechanics of Earthquakes and Faulting (3rd edition). Cambridge University Press, Cambridge, 493 p. https://doi.org/10.1017/9781316681473
Sibson, R.H., 1974, Frictional constraints on thrust, wrench and normal faults. Nature, 249, 542–544. https://doi.org/10.1038/249542a0
Sibson, R.H., 1996, Structural permeability of fluid-driven fault-fracture meshes. Journal of Structural Geology, 18, 1031–1042.
Soltanzadeh, H. and Hawkes, C.D., 2008, Semi-analytical models for stress change and fault reactivation induced by reservoir production and injection. Journal of Petroleum Science and Engineering, 60, 71–85. https://doi.org/10.1016/j.petrol.2007.05.006
Thanh, N.T. and Tokunaga, T., 2004, In-situ stress and pore pressure fields in the North Cuu Long Basin, offshore Vietnam. Proceedings in SPE Asia Pacific Conference on Intergrated Modelling for Asset Management, Kuala Lumpur, Mar. 29–30, p. 1–9. https://doi.org/10.2118/87055-MS
Thiercelin, M.J. and Plumb, R.A., 1994, A core-based prediction of lithologic stress contrasts in East Texas formations. SPE Formation Evaluation, 9, 251–258.
Tingay, M., 2003, In situ stress and overpressures of Brunei Darussalam. Ph.D. Thesis, University of Adelaide, Adelaide, 271 p.
Tingay, M.R.P., Hillis, R.R., Morley, C.K., Swarbrick, R.E., and Drake, S.J., 2005, Present day stress orientations in Brunei: a snapshot of prograding tectonics in a Tertiary Delta. Journal of the Geological Society, 162, 39–49. https://doi.org/10.1144/0016-764904-017
Tingay, M.R.P., Hillis, R.R., Swarbrick, R.E., Morley, C.K., and Damit, A.R., 2009, Origin of overpressure and pore-pressure prediction in the Baram province, Brunei. American Association of Petroleum Geologists Bulletin, 93, 51–74. https://doi.org/10.1306/08080808016
Warpinski, N.R., 1989, Determining the minimum in situ stress from hydraulic fracturing through perforations. International Journal of Rock Mechanics and Mining Sciences 26, 523–532.
Warpinski, N.R. and Teufel, L.W., 1987, Influence of geologic discontinuities on hydraulic fracture propagation. Journal of Petroleum Technology, 39, 209–220. https://doi.org/10.2118/13224-PA
White, A.J., Traugott, M.O., and Swarbrick, R.E., 2002, The use of leak-off tests as means of predicting minimum in-situ stress. Petroleum Geoscience, 8, 189–193. https://doi.org/10.1144/petgeo.8.2.189
Wiprut, D. and Zoback, M., 2000, Constraining the stress tensor in the Visund field, Norwegian North Sea: application to wellbore stability and sand production. International Journal of Rock Mechanics and Mining Sciences, 37, 317–336. https://doi.org/10.1016/S1365-1609(99)00109-4
Wiprut, D., Zoback, M., Hanssen, T.H., and Peska, P., 1997, Constraining the full stress tensor from observations of drilling-induced tensile fractures and leak-off tests: application to borehole stability and sand production on the Norwegian margin. International Journal of Rock Mechanics and Mining Sciences, 34, 365.e1–365.e12. https://doi.org/10.1016/S1365-1609(97)00157-3
Yassir, N.A. and Zerwer, A., 1997, Stress regimes in the Gulf Coast, offshore Louisiana: data from well-bore breakout analysis. American Association of Petroleum Geologists Bulletin, 81, 293–307.
Ziegler, P.A., 1983, Tectonics of the North Sea basin and their possible relation to historical earthquakes. In: Ritsema, A.R. and Grupinar, A. (eds.), Seismicity and Seismic Risk in the Offshore North Sea Area. D. Reidel Publishing Company, Dordrecht, p. 3–13.
Zoback, M.D., 2010, Reservoir Geomechanics. Cambrigde University Press, Cambridge. 449 p.
Zoback, M.D., Barton, C.A., Brudy, M., Castillo, D.A., Finkbeiner, T., Grollimund, B.R., Moos, D.B., Peska, P., Ward, C.D., and Wiprut, D.J., 2003, Determination of stress orientation and magnitude in deep wells. International Journal of Rock Mechanics and Mining Sciences, 40, 1049–1076. https://doi.org/10.1016/j.ijrmms.2003.07.001
Zoback, M.L., 1992, First- and second-order patterns of stress in the lithosphere: The World Stress Map Project. Journal of Geophysical Research, 97, 11703–11728.
Acknowledgments
We appreciate constructive and thought-provoking comments from two anonymous reviewers, which enhanced the quality of this paper. This work was supported by a grant from the Energy Efficiency & Resources of the Korea Institute of Energy Technology Evaluation and Planning (KETEP) funded by the Korea Government Ministry of Trade, Industry & Energy (No. 20162010201980).
Author information
Authors and Affiliations
Corresponding author
Additional information
Publisher’s Note Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
About this article
Cite this article
Vo, U.D., Chang, C. Geomechanical characterization of sedimentary basins using tectonic stress and strain. Geosci J 24, 669–678 (2020). https://doi.org/10.1007/s12303-020-0006-8
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s12303-020-0006-8