Issue 7, 2020

Increasing the output charge quantity of triboelectric nanogenerators via frequency multiplication with a multigap-structured friction layer

Abstract

The output current from a triboelectric nanogenerator (TENG) primarily depends on the amount of triboelectric charge existing on the friction layer. The triboelectric charge capacity and charge-driving ability of the friction layer are the key parameters for enhancing the output performance of a TENG. In this paper, we developed a new TENG with a multigap-structured friction layer. The presence of these gaps creates additional contacts between the friction layers, which can induce additional separated triboelectric charges and increased output charge quantity. Moreover, because of these gaps, the TENG generates more output current pulses for each driving cycle, which implies that the frequency of the output current can be several times the driving frequency. In one driving cycle, a generic TENG without any gaps in the friction layer generates 2 current pulses and a unit area charge quantity per cycle (UCQC) value of 0.23 nC cm2, while a TENG with seven gaps in the friction layer can generate around 14 current output pulses and UCQC value of 294 nC cm−2, which is 1.18 times the value of the record one. This work can contribute toward a rapid increase in TENG performance, thereby accelerating its applications.

Graphical abstract: Increasing the output charge quantity of triboelectric nanogenerators via frequency multiplication with a multigap-structured friction layer

Supplementary files

Article information

Article type
Communication
Submitted
07 Mar 2020
Accepted
01 Jun 2020
First published
02 Jun 2020

Energy Environ. Sci., 2020,13, 2069-2076

Increasing the output charge quantity of triboelectric nanogenerators via frequency multiplication with a multigap-structured friction layer

N. Cui, C. Dai, J. Liu, L. Gu, R. Ge, T. Du, Z. Wang and Y. Qin, Energy Environ. Sci., 2020, 13, 2069 DOI: 10.1039/D0EE00922A

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements