Skip to main content
SpringerLink
Log in

Physical and Mechanical Properties of Pyro-Compacted Carbon-Carbon Material on a Fabric Warp

  • GENERAL PURPOSE MATERIALS
  • Published:
Inorganic Materials: Applied Research Aims and scope

Abstract

The work showed that a change in the length of the samples within 60–100 mm and a width within 12–25 mm, as well as the shape of the samples, did not have a significant effect on the change in the mechanical characteristics when tested in compression in both directions of the UPA-4 material obtained by deposition of pyrolytic carbon from the gas phase on the warp made of graphite viscose fabric URAL-T-22. The carbon matrix of this material was formed as a result of the gradual deposition of pyrolytic carbon from the gas phase at a temperature of 980°C for ~150 h and at 1070°C for ~100 h. The paper presents the results of tests at different temperatures. Tests of flat specimens for bending, compression, and stretching were performed at room temperature. To assess the heat resistance of the material, samples were tested for bending in a neutral argon medium at a speed of active capture of 5 mm/min in a temperature range of 20–2800°C. The tests have shown that the developed material is structural and heat-resistant, since in the temperature range up to 2200°C it retains its bending strength, and as the temperature rises to 2500°C, it deforms with plasticity without breaking.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Log in via an institution

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Fig. 1.
Fig. 2.
Fig. 3.

Similar content being viewed by others

REFERENCES

  1. Malikov, I.N., Perederii, M.A., Kurakov, Yu.I., and Noskova, Yu.A., Carbon sorbents based on biological wastes, Materialy 7 Mezhdunarodnoi konferentsii “Uglerod: fundamental’nye problemy nauki, materialovedenie, tekhnologiya” (Proc. Seventh Int. Conf. “Carbon: Fundamental Problems of Sciences, Material Science, and Technology”), Vladimir, 2010.

  2. Meleshko, A.I. and Polovnikov, S.P., Uglerod, uglerodnye volokna, uglerodnye kompozity (Carbon, Carbon Fibers, and Carbon Composites), Moscow: Sains Press, 2007.

  3. Zolkin, P.I., Kavalerskii, G.M., Sereda, A.P., Aberya-khimov, H.M., Altuf’ev, A.V., and Berezhnova, A.A., Carbon hip replacement, Genii Ortop., 2015, no. 2, pp. 32–35.

  4. Beletskii, E.N., Modeling the force interaction process of a tool during critical parts from composite carbon plastics used in shipbuilding machining, Vestn. Gos. Univ. Morsk. Rechn. Flota im. Admirala S.O. Makarova, 2014, no. 6 (28), pp. 67–76.

  5. Kostikov, V.I. and Varenkov, A.N., Sverkhvysokotemperaturnye kompozitsionnye materialy (Ultrahigh Temperature Composite Materials), Moscow: Intermet Enginiiring, 2003.

  6. Karabasov, Yu.S., Novyye materialy (New Materials), Moscow: Mosk. Inst. Stali Splavov, 2000.

  7. Vasil’eva, V.V. and Tarnopol’skii, Yu.M., Kompozitsionnye materialy: Spravochnik (Composite Materials: Handbook), Moscow: Mashinostroenie, 1990.

  8. Belov, I.M., Gordeev, S.K., Barzinskii, O.V., and Korchagina, S.V., RF Patent 2225354, 2004.

  9. Kolesnikov, S.A., Technological support for the manufacture of large-sized structures from carbon-carbon composite materials, Konstr. Kompoz. Mater., 2017, no. 4, pp. 18–26.

  10. Golubkov, V.V. and Rakov, E.G., Building materials with carbon nanofibres, Materialy 7 Mezhdunarodnoi konferentsii “Uglerod: fundamental’nye problemy nauki, materialovedenie, tekhnologiya” (Proc. Seventh Int. Conf. “Carbon: Fundamental Problems of Sciences, Material Science, and Technology”), Vladimir, 2010, p. 99.

  11. Kolesnikov, S.A., Kim, L.V., Vorontsov, V.A., Protsenko, A.K., and Cheblakova, E.G., Study of thermophysical property formation of spatially reinforced carbon-carbon composite materials, Refract. Ind. Ceram., 2017, vol. 58, no. 4, pp. 439–449.

    Article  CAS  Google Scholar 

  12. Klimakova, L.A. and Polovyi, A.O., Possible use of carbon plastics in thermostable structures of precision constructions, Vestn. Mosk. Gos. Tekh. Univ. im. Baumana, Mashinostr., 2008, no. 2, pp. 2–28.

  13. Agapova, E.G. and Khal’zova, N.A., Formirovanie logisticheskoi strategii upravleniya na osnove obrabotki eksperimental’nykh dannykh (Formation of a Logistic Management Strategy Based on Experimental Data Processing), Khabarovsk: Tikhookean. Gos. Univ., 2016.

Download references

Author information

Authors and Affiliations

  1. Test Center of Joint-Stock Company Research Institute of Structural Materials Based on Graphite Niigrafit, 111524, Moscow, Russia

    G. E. Mostovoy & A. A. Konyushenkov

Authors
  1. G. E. Mostovoy
    View author publications

    You can also search for this author in PubMed Google Scholar

  2. A. A. Konyushenkov
    View author publications

    You can also search for this author in PubMed Google Scholar

Corresponding authors

Correspondence to G. E. Mostovoy or A. A. Konyushenkov.

Additional information

Translated by V. Selikhanovich

Rights and permissions

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Mostovoy, G.E., Konyushenkov, A.A. Physical and Mechanical Properties of Pyro-Compacted Carbon-Carbon Material on a Fabric Warp. Inorg. Mater. Appl. Res. 11, 420–423 (2020). https://doi.org/10.1134/S2075113320020252

Download citation

  • Received:

  • Revised:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1134/S2075113320020252

Keywords:

Search

Navigation