Abstract
This paper reports the results of a thermogravimetric analysis of titanium dioxide powders, as well as silane–urethane sealants with these fillers. Based on the results of testing the sealants by thermal analysis, the effect of titanium dioxide powders on increasing the heat stability of hybrid silane-functional sealants to 150–160°C has been discussed.
Similar content being viewed by others
REFERENCES
S. N. Gladkikh, S. E. Loginova, M. Yu. Kladov, and M. A. Belinskii, “Investigation of urethane sealants by methods of thermal analysis,” Polym. Sci., Ser. D 12, 266–272 (2019).
S. E. Loginova, E. B. Averchenko, and S. N. Gladkikh, “An adhesive sealant with an improved set of properties based on silane-functional polymers,” Klei, Germetiki, Tekhnol., No. 2, 2–7 (2017).
S. E. Loginova, S. N. Gladkikh, E. A. Kurilova, N. V. Nikonova, and E. B. Averchenko, “Viladex Russian hybrid silane-functional adhesive sealants with enhanced performance properties,” Polym. Sci., Ser. D 11, 415–418 (2018).
I. A. Petlin, Candidate’s Dissertation in Engineering (Kazan, 2016).
V. Yu. Senichev, S. F. Krasnosel’skikh, and A. V. Senichev, “Fast-curing silanized polyetherurethane sealants,” Polym. Sci., Ser. D 11, 56–59 (2018).
R. A. Smyslova and S. V. Kotlyarova, Reference Manual on Rubber-Based Sealing Materials (Khimiya, Moscow, 1976) [in Russian].
A. P. Petrova, Heat Resistant Adhesives (Khimiya, Moscow, 1977) [in Russian].
A. P. Petrova, Adhesive Materials (K i R, Moscow, 2002) [in Russian].
Fillers for Polymer Composite Materials: Handbook, Ed. by G. S. Kats and D. V. Milevski (Khimiya, Moscow, 1981) [in Russian].
A. Vegera, “Titanium dioxide Cristal: New opportunities for manufacturers of paints and varnishes,” Lakokras. Mater. Ikh Primen., No. 6, 34–35 (2007).
L. G. Gerasimova, E. S. Shchukina, M. V. Maslova, S. N. Gladkikh, G. R. Garaeva, and V. M. Kolobkova, “Synthesis of rutile titanium dioxide from Russian raw materials,” Polym. Sci., Ser. D 10, 23–27 (2016).
ACKNOWLEDGMENTS
The authors express their deep appreciation and gratitude to M.Yu. Kladov, Cand. Sci. (Eng.), and M.A. Belinskii for invaluable help in testing the samples of materials using thermogravimetric and thermomechanical analysis techniques and in interpreting the results.
Author information
Authors and Affiliations
Corresponding author
Ethics declarations
The authors declare that they have no conflicts of interest.
Additional information
Translated by D. Kharitonov
Rights and permissions
About this article
Cite this article
Gladkikh, S.N., Loginova, S.E., Gerasimova, L.G. et al. The Effect of Titanium Dioxide on Heat Stability of Sealants. Polym. Sci. Ser. D 13, 136–140 (2020). https://doi.org/10.1134/S1995421220020082
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1134/S1995421220020082