Abstract
The effect of combined surface hardening such as electromechanical treatment and surface plastic deformation exerted on inelastic deformation processes occurring in grade 45 steel has been studied. The results of tensile tests and the analysis of the mechanical hysteresis loops for samples of grade 45 steel subjected to combined surface hardening are presented. The characteristic features of the inelastic properties and microinhomogeneous deformation of steel samples are considered, depending on a regularly inhomogeneous structure of the hardened surface layer.
Similar content being viewed by others
REFERENCES
Papshev, D.D., Otdelochno-uprochnyayushchaya obrabotka poverkhnostnym plasticheskim deformirovaniem (Finishing and Hardening by Surface Plastic Deformation), Moscow: Mashinostroenie, 1978.
Odintsov, L.G., Uprochnenie i otdelka detalei poverkhnostnym plasticheskim deformirovaniem (Hardening and Finishing of Parts by Surface Plastic Deformation), Moscow: Mashinostroenie, 1987.
Nauchno-tekhnicheskii progress v mashinostroenii (Scientific and Technical Progress in Mechanical Engineering), Frolov, K.V., Ed., Moscow: IMASh AN SSSR, 1989, no. 9.
Sulima, A.M., Shulov, V.A., and Yagodkin, Yu.D., Poverkhnostnyi sloi i ekspluatatsionnye svoistva detalei mashin (Surface Layer and Operational Properties of Machine Parts), Moscow: Mashinostroenie, 1988.
Babei, Yu.I., Fizicheskie osnovy impul’snogo uprochneniya stali i chuguna (Physical Fundamentals of Pulsed Hardening of Steel and Cast Iron), Kiev: Naukova Dumka, 1988.
Lesyk, D.A., Martinez, S., Mordyuk, B.N., Dzhemelinskyi, V.V., et al., Effects of laser heat treatment combined with ultrasonic impact treatment on the surface topography and hardness of carbon steel AISI 1045, Opt. Laser Technol., 2019, vol. 111, p. 424.
Tsuji, N., Tanaka, S., and Takasugi, T., Effect of combined plasma-carburizing and deep-rolling on notch fatigue property of Ti–6Al–4V alloy, Mater. Sci. Eng. A, 2009, vol. 499, nos. 1–2, p. 482.
Troshchenko, V.T., Ustalost’ i neuprugost' metallov (Fatigue and Inelasticity of Metals), Kiev: Naukova Dumka, 1971.
Savkin, A.N. and Bagmutov, V.P., Prognozirovanie ustalostnoi dolgovechnosti vysokonagruzhennykh konstruktsii (Prediction of Fatigue Life of Heavily Loaded Structures), Volgograd: VGTU, 2013.
Fedorov, A.V. and Dudkina, N.G., Scattering of mechanical energy in structural steels subjected to electromechanical treatment, Mechanika, 1998, no. 2 (13), p. 15.
Matlin, M.M., Dudkina, N.G., and Boldov, A.N., Features of the plastic deformation of steel details combined-hardened treatment EMT+SPD, Uprochn. Tekhnol. Pokryt., 2010, no. 8, p. 44.
Dudkina, N.G. and Sadovin, A.A., The study of plastic deformation and strength of steel details combined-hardened method EMT+SPD, Metalloobrabotka, 2012, no. 1, p. 37.
Dudkina, N.G. and Zakharov, I.N., Microinhomogeneous deformation of the surface layer of a carbon steel subjected to electromechanical hardening, Russ. Metall., 2005, vol. 2005, no. 5, p. 449.
Dudkina, N.G., Burminskaya, L.N., and Svitachev, A.Yu., The influence of thermal processes during EMO on the formation of the structure of the surface layer of hardened carbon steels, Fiz.-Khim. Mekh. Mater., 1995, no. 5, p. 113.
Nerubai, M.S. and Ovchinnikov, A.P., Formation of residual stresses during combined electromechanical and ultrasonic hardening, in Materialy nauchno-tekhnicheskoi konf. Poverkhnostnoe uprochnenie detalei mashin i instrumentov (Proceedings of the Conference on Surface Hardening of Machine Parts and Tools), Kuibyshev, 1976, pp. 71.
Author information
Authors and Affiliations
Corresponding author
Additional information
Translated by O. Polyakov
About this article
Cite this article
Dudkina, N.G. Development of Inelastic Deformation upon Electromechanical Treatment and Surface Plastic Deformation of Grade 45 Steel. J. Mach. Manuf. Reliab. 49, 116–121 (2020). https://doi.org/10.3103/S1052618820020077
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.3103/S1052618820020077