Abstract
A method is proposed for the classification of basing modules for component surfaces. The classification is based on the primary fitting dimension, a dimensional ratio, and the accuracy. An example of classification is presented for the B311.1 basing module.
Similar content being viewed by others
REFERENCES
Bazrov, B.M., Modul’naya tekhnologiya v mashinostroenii (Module-Based Technology in Machine Engineering), Moscow: Mashinostroenie, 2001.
Bazrov, B.M., Osnovy tekhnologii mashinostroeniya: uchebnik (Fundamentals of Machine Engineering: Manual), Moscow: INFRA-M, 2016.
GOST (State Standard) 23360-78: Basic Norms of Interchangeability, Keys Couplings with Prismatic Keys, Keys Dimensions and Keyways Sections, Limits and Fits, Moscow: Izd. Standartov, 1980.
GOST (State Standard) 25346–2013: Basic Norms of Interchangeability, Geometrical Product Specifications, Code System for Tolerances on Linear Sizes, General Provisions, Tolerances, Deviations and Fits, Moscow: Izd. Standartov, 2014.
Author information
Authors and Affiliations
Corresponding author
Additional information
Translated by B. Gilbert
About this article
Cite this article
Bazrov, B.M., Rodionova, N.A. Classification of Basing Modules for Component Surfaces. Russ. Engin. Res. 40, 436–438 (2020). https://doi.org/10.3103/S1068798X20050032
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.3103/S1068798X20050032