Skip to main content
Log in

Position Servo Control Method for Multi-Degree-of-Freedom Pneumatic Manipulators Based on Delayed Feedback

  • Published:
Automatic Control and Computer Sciences Aims and scope Submit manuscript

Abstract

Multi-degree-of-freedom pneumatic manipulators are prone to time delay for influence of joint disturbances during position servo, resulting in poor robustness of position servo control of multi-degree-of-freedom pneumatic manipulators, so in order to improve the robustness of position servo control of multi-degree-of-freedom pneumatic manipulators, a method of position servo robustness control for multi-degree-of-freedom pneumatic manipulators based on delayed feedback is proposed. In this method, a sensor array is adopted to acquire position servo parameters of a multi-degree-of-freedom pneumatic manipulator, and a controlled object model for position servo control of the multi-degree-of-freedom pneumatic manipulator is constructed to adjust control constraint parameters. Based on this model constructed, the time-delay coupling tracking compensation method is adopted to adjust position error of the multi-degree-of-freedom pneumatic manipulator, and the inertial attitude parameter fusion method is adopted to correct control error of the manipulator, so as to optimize position servo control output of the manipulator. Simulation results show that this method has advantages of small error, good stability and posture error correction performance in position servo control of multi-degree-of-freedom pneumatic manipulators.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Institutional subscriptions

Fig. 1.
Fig. 2.
Fig. 3.
Fig. 4.
Fig. 5.
Fig. 6.

Similar content being viewed by others

REFERENCES

  1. Hou Che, Wang Zheng, Zhao Yiwen, and Song Guoli, Load adaptive force-free control for the direct teaching of robots, ROBOT, 2017, vol. 39, no. 4, pp. 439–448.

    Google Scholar 

  2. You, Y.P., Zhang, Y., and Li, C.G., Force-free control for the direct teaching of robots, J. Mech. Eng., 2014, vol. 50, no. 3, pp. 10–17.

    Article  Google Scholar 

  3. Uijlings, J.R.R., van de Sande, K.E.A., Gevers, T., et al., Selective search for object recognition, Int. J. Comput. Vision, 2013, vol. 104, no. 2, pp. 154–171.

    Article  Google Scholar 

  4. Zhang Danfeng, Li Bin, and Wang Liyan, Tracking control method of the centre-of-mass velocity for a snake-like robot based on the continuum model, ROBOT, 2017, vol. 39, no. 6, pp. 829–837.

    Google Scholar 

  5. Li Ke and Mi Jie, Research on mechanical and electrical control algorithm of bionic robot based on variable structure PID, J. Henan Univ. Eng.,Nat. Sci. Ed., 2016, vol. 28, no. 2, pp. 32–37.

    Google Scholar 

  6. Du Xuedan, Cai Yinghao, Lu Tao, Wang Shuo, and Yan Zhe, A robotic grasping method based on deep learning, ROBOT, 2017, vol. 39, no. 6, pp. 820–828, 837.

  7. Ren, Z.W., Zhu, Q.G., and Xiong, R., A joint physical constraints avoidance method for inverse kinematics problem of redundant humanoid manipulator, J. Mech. Eng., 2014, vol. 50, no. 19, pp. 58–65.

    Article  Google Scholar 

  8. Jing Fengshui, Yang Chao, Yang Guodong, and Tan Min, Robot trajectory rectification control methods, ROBOT, 2017, vol. 39, no. 3, pp. 292–297.

    Google Scholar 

  9. Du Xuedan, Cai Yinghao, Lu Tao, Wang Shuo, and Yan Zhe, A robotic grasping method based on deep learning, ROBOT, 2017, vol. 39, no. 6, pp. 820–828, 837.

  10. Varley, J., Weisz, J., Weiss, J., et al., Generating multi-fingered robotic grasps via deep learning, IEEE/RSJ International Conference on Intelligent Robots and Systems, Piscataway, 2015, pp. 4415–4420.

  11. Zeiler, M.D. and Fergus, R., Visualizing and understanding convolutional networks, 13th European Conference on Computer Vision, Berlin, 2014, pp. 818–833.

  12. Ren, S.Q., He, K.M., Girshick, R., et al., Faster R-CNN: Towards real-time object detection with region proposal networks, in Advances in Neural Information Processing Systems, Cambridge: MIT Press, 2015, pp. 91–99.

  13. Jiang, Y., Moseson, S., and Saxena, A., Efficient grasping from RGBD images: Learning using a new rectangle representation, IEEE International Conference on Robotics and Automation, Piscataway, 2011, pp. 3304–3311.

  14. Krizhevsky, A., Sutskever, I., and Hinton, G.E., ImageNet classification with deep convolutional neural networks, in Advances in Neural Information Processing Systems, Cambridge: MIT Press, 2012, pp. 1097–1105.

  15. Maitin-Shepard, J., Cusumano-Towner, M., Lei, J., et al., Cloth grasp point detection based on multiple-view geometric cues with application to robotic towel folding, IEEE International Conference on Robotics and Automation, Piscataway, 2010, pp. 2308–2315.

  16. Johns, E., Leutenegger, S., and Davison, A.J., Deep learning a grasp function for grasping under gripper pose uncertainty, IEEE/RSJ International Conference on Intelligent Robots and Systems, Piscataway, 2016, pp. 4461–4468.

  17. Zeng Xiangxin, Cui Naigang, and Guo Jifeng, Path planning of space robot based on hp-adaptive pseudospectral method, ROBOT, 2018, vol. 40, no. 3, pp. 385–392.

    Google Scholar 

  18. Liao, Y.H., Li, D.K., and Tang, G.J., Motion planning of space manipulator system based on a hybrid programming strategy, J. Astronaut., 2011, vol. 32, no. 1, pp. 98–103.

    Article  Google Scholar 

  19. Darby, C.L., Hager, W.W., and Rao, A.V., An hp-adaptive pseudospectral method for solving optimal control problems, Optim. Control Appl. Methods, 2011, vol. 32, no. 4, pp. 476–502.

    Article  MathSciNet  Google Scholar 

  20. Ren Shuai, Zhang Tao, Xu Zhenchao, Wang Zhen, He Yuan, and Liu Yunong, Information hiding algorithm for 3D models based on feature point labeling and clustering, J. Comput. Appl., 2018, vol. 38, no. 4, pp. 1017–1022.

    Google Scholar 

Download references

Funding

This work was supported by Henan Provincial Education Department Foundation under grant no. Young key teachers, and National Natural Science Foundation of China under grant no. 2015GGJS-202.

Author information

Authors and Affiliations

Authors

Corresponding author

Correspondence to Wang Hongying.

Ethics declarations

The authors declare that they have no conflicts of interest.

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Wang Hongying, Liu Shiping Position Servo Control Method for Multi-Degree-of-Freedom Pneumatic Manipulators Based on Delayed Feedback. Aut. Control Comp. Sci. 54, 10–18 (2020). https://doi.org/10.3103/S0146411620010058

Download citation

  • Received:

  • Revised:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.3103/S0146411620010058

Keywords:

Navigation