Abstract
Lignin obtained by Lignoboost® procedure from black liquor after kraft pulping of Eucalyptus globulus wood was characterized and converted into liquid polyols via an innovative and safe procedure using base catalyzed oxyalkylation with propylene carbonate (PC). The effect of four catalysts, Potassium carbonate (K2CO3), 1,8-diazabicyclo [5.4.0] undec-7-ene (DBU), dicyanodiamide (DICY), and 1,4-diazabicyclo [2.2.2] octane (DABCO) was evaluated in terms of lignin polyol yield and weight gain. The ensuing polyols were also characterized by fourier transform infrared (FTIR), 1H NMR, 13C NMR, and size exclusion chromatography (SEC) to determine the degree of the substitution (DS), degree of polymerization (DP), and the molecular weight, respectively. Only a minor proportion of PC (ca. 3–15%) was converted to propylene glycol/homooligomers as revealed by high performance liquid chromatography (HPLC). All catalysts promoted preferential derivatization of lignin phenolic OH groups by oxypropyl moieties. The maximum average DP of propylene oxide chains in oxyalkylated Lignoboost® kraft lignin (oKL) was 1.85 per one phenylpropane unit (PPU) using DBU. Conversely, the DP of oKL using DICY was very low (0.27/PPU). DICY’s catalytic activity seems to be jeopardized due to the formation of unreactive adducts with lignin. The oKL obtained using DBU, DABCO, and K2CO3 have potential to be used as polyols in the production of polyurethanes as the corresponding hydroxyl number (IOH) is in the range of 198–410 mg KOH g−1.
Funding source: Portuguese Foundation for Science and Technology
Award Identifier / Grant number: UIDB/50011/2020
Funding source: Ministério da Ciência, Tecnologia e Ensino Superior
Award Identifier / Grant number: UIDP/50011/2020
Funding source: European Regional Development Fund (ERDF)
Award Identifier / Grant number: 21874
-
Author contribution: All the authors have accepted responsibility for the entire content of this submitted manuscript and approved submission.
-
Research funding: This work was developed within the scope of the project CICECO-Aveiro Institute of Materials, UIDB/50011/2020 & UIDP/50011/2020, financed by national funds through the Portuguese Foundation for Science and Technology/MCTES and the Project Inpactus – innovative products and technologies from eucalyptus, project no. 21874 funded by Portugal 2020 through European Regional Development Fund (ERDF) within the frame of COMPETE 2020 nº246/AXIS II/2017.
-
Employment or leadership: None declared.
-
Honorarium: None declared.
-
Conflict of interest statement: The authors declare no conflicts of interest regarding this article.
References
Akil, Y., Lorenz, D., Lehnen, R., and Saake, B. (2016). Safe and non-toxic hydroxyalkylation of xylan using propylene carbonate. Eur. Polym. J. 77: 88–97, https://doi.org/10.1016/j.eurpolymj.2016.02.010.Search in Google Scholar
Alves, M., Grignard, B., Gennen, S., Detrembleur, C., Jerome, C., and Tassaing, T. (2015). Organocatalytic synthesis of bio-based cyclic carbonates from CO2 and vegetable oils. RSC Adv. 5: 53629–53636, https://doi.org/10.1039/C5RA10190E.Search in Google Scholar
ASTM D4662-08 (2011). Standard Test Methods for Testing Polyurethane Raw Materials: Determination of acid and alkalinity numbers of polyols. ASTM International, Philadelphia, USA.Search in Google Scholar
Baghernejad, B. (2010). 1,4- Diazabicyclo[2.2.2]octane (DABCO) as a useful catalyst in organic synthesis. Eur. J. Chem. 1: 54–50, https://doi.org/10.5155/eurjchem.1.1.54-60.2.Search in Google Scholar
Cateto, C.A., Barreiro, M.F., Rodrigues, A.E., Brochier-Salon, M.C., Thielemans, W., and Belgacem, M.N. (2008). Lignins as macromonomers for polyurethane synthesis: a comparative study on hydroxyl group determination. J. Appl. Polym. Sci. 109: 3008–3017, https://doi.org/10.1002/app.28393.Search in Google Scholar
Cateto, C.A., Barreiro, M.F., Rodrigues, A.E., and Belgacem, M.N. (2009). Optimization study of lignin oxypropylation in view of the preparation of polyurethane rigid foams. Ind. Eng. Chem. Res. 48: 2583–2589, https://doi.org/10.1021/ie801251r.Search in Google Scholar
Duval, A. and Avérous, L. (2016). Oxyalkylation of condensed tannin with propylene carbonate as an alternative to propylene oxide. Sustain. Chem. Eng. 4: 3103–3112, https://doi.org/10.1021/acssuschemeng.6b00081.Search in Google Scholar
Duval, A. and Avérous, L. (2017). Cyclic carbonates as safe and versatile etherifying reagents for the functionalization of lignins and tannins. Sustain. Chem. Eng. 5: 7334–7343, https://doi.org/10.1021/acssuschemeng.7b01502.Search in Google Scholar
Evtiouguina, M., Barros-Timmons, A., Cruz-Pinto, J.J., Neto, C.P., Belgacem, M.N., and Gandini, A. (2001). Oxypropylation of cork and the use of the ensuing polyols in polyurethane formulations. Biomacromolecules 3: 57–62, https://doi.org/10.1021/bm010100c.Search in Google Scholar
Evtuguin, D.V., Andreolety, J.P., and Gandini, A. (1998). Polyurethanes based on oxygen-organosolv lignin. Eur. Polym. J. 34: 1163–1169, https://doi.org/10.1016/s0014-3057(97)00245-0.Search in Google Scholar
Evtuguin, D.V., Neto, C.P., Silva, A.M.S., Domingues, P.M., Amado, F.M.L., Robert, D., and Faix, O. (2001). Comprehensive study on the chemical structure of dioxane lignin from plantation Eucalyptus globulus wood. J. Agric. Food Chem. 49: 4252–4261, https://doi.org/10.1021/jf010315d.Search in Google Scholar PubMed
Figueiredo, P., Lintinen, K., Hirvonen, J.T., Kostiainen, M.A., and Santos, H.A. (2018). Properties and chemical modifications of lignin: towards lignin-based nanomaterials for biomedical applications. Prog. Mater. Sci. 93: 233–69, https://doi.org/10.1016/j.pmatsci.2017.12.001.Search in Google Scholar
Gao, Y. and Yunzhao Y. (2002). The synergistic effect of dicyandiamide and resorcinol in the curing of epoxy resins. J. Appl. Polym. Sci. 89: 1869–1874, https://doi.org/10.1002/app.12316.Search in Google Scholar
Glasser, W.G. and Hsu, O.H.H. (1977). Polyurethane intermediates and products and methods of producing same from lignin, US Patent number: 4017474.Search in Google Scholar
Güthner, T., Mertschenk, B., and Schulz, B. (2012). Guanidine and derivatives. In:Ullmann’s encyclopedia of industrial chemistry, Vol. 17, Wiley-VCH, Germany, pp. 182–185.10.1002/14356007.a12_545.pub2Search in Google Scholar
Ionescu, M. (2005). Chemistry and technology of polyols for polyurethanes. Rapra Technology Limited, Shropshire, UK, pp. 37–41.Search in Google Scholar
Jasiukaitytė-Grojzdek, E., Kunaverf, M., and Crestini, C. (2012). Lignin structural changes during liquefaction in acidified ethylene glycol. J. Wood Chem. Technol. 32: 342–360, https://doi.org/10.1080/02773813.2012.698690.Search in Google Scholar
Jin, Y., Ruan, X., Cheng, X., and Lü, Q. (2011). Liquefaction of lignin by polyethyleneglycol and glycerol. Bioresour. Technol. 102: 3581–3583, https://doi.org/10.1016/j.biortech.2010.10.050.Search in Google Scholar PubMed
Kühnel, I., Podschun, J., Saake, B., and Lehnen R. (2015). Synthesis of lignin polyols via oxyalkylation with propylene carbonate. Holzforschung 69: 531–538, https://doi.org/10.1515/hf-2014-0068.Search in Google Scholar
Kühnel, I., Saake, B., and Lehnen, R. (2017a). Comparison of different cyclic organic carbonates in the oxyalkylation of various types of lignin. React. Func. Polym. 120: 83–91, https://doi.org/10.1016/j.reactfunctpolym.2017.09.011.Search in Google Scholar
Kühnel, I., Saake, B., and Lehnen, R. (2017b). Oxyalkylation of lignin with propylene carbonate: influence of reaction parameters on the ensuing bio-based polyols. Ind. Crop. Prod. 101: 75–83, https://doi.org/10.1016/j.indcrop.2017.03.002.Search in Google Scholar
Liu, H., Chung, H. (2017). Lignin-based polymers via graft copolymerization. J. Polym. Sci., Part A: Polym. Chem. 55: 3515–3528, https://doi.org/10.1002/pola.28744.Search in Google Scholar
Lohmeijer, B.G., Pratt, R.P., Leibfarth, F., Logan, J.W., Long, D.A., Dove, A.P., Nederberg, F., Choi, J.,Wade, C., Waymouth, R.M., and Hedrick, J.L. (2006). Guanidine and amidine organocatalysts for ring-opening polymerization of cyclic esters. Macromolecules 39: 8574–8583, https://doi.org/10.1021/ma0619381.Search in Google Scholar
Magina, S., Santos, A.P., and Evtuguin, D.V. (2015). Study on the residual lignin in Eucalyptus globulus sulphite pulp. Holzforschung 69: 513–522, https://doi.org/10.1515/hf-2014-0218.Search in Google Scholar
Matsuo, J., Nakano, S., Sanda, F., and Endo, T. (1998). Ring-opening polymerization of cyclic carbonates by alcohol – acid catalyst. J. Polym. Sci., Part A: Polym. Chem. 36: 2463–2471, https://doi.org/10.1002/(SICI)1099-0518(199810)36:14<2463::AID-POLA4>3.0.CO;2-U.10.1002/(SICI)1099-0518(199810)36:14<2463::AID-POLA4>3.0.CO;2-USearch in Google Scholar
Nadji, H., Bruzzèse, C., Belgacem, M.N., Benaboura, A., and Gandini, A. (2005). Oxypropylation of lignins and preparation of rigid polyurethane foams from the ensuing polyols. Macromol. Mater. Eng. 290: 1009–1016, https://doi.org/10.1002/mame.200500200.Search in Google Scholar
Pinto, P.C., Evtuguin, D.V., Pascoal Neto, C., and Silvestre, A.J.D. (2002). Behaviour of Eucalyptus globulus lignin during kraft pulping. Part 2. Analysis by NMR, ESI/MS and GPC techniques. J. Wood Chem. Technol. 22: 109–125, https://doi.org/10.1081/WCT-120013356.Search in Google Scholar
Prozil, S.O., Evtuguin, D.V., Silva, A.M.S, and Lopes, L. P.C. (2014). Structural characterization of lignin from grape stalks (Vitis vinifera L.). J. Agric. Food Chem. 62: 5420–5428, https://doi.org/10.1021/jf502267s.Search in Google Scholar
Rokicki, G. (2000). Aliphatic cyclic carbonates and spiroorthocarbonates as monomers. Prog. Polym. Sci. 25: 259–342, https://doi.org/10.1016/s0079-6700(00)00006-x.Search in Google Scholar
Sadeghifar, H., Cui, C., and Argyropoulos, D.S. (2012). Toward thermoplastic lignin polymers. Part 1. selective masking of phenolic hydroxyl groups in kraft lignins via methylation and oxypropylation chemistries. Ind. Eng. Chem. Res. 51: 16713–16720, https://doi.org/10.1021/ie301848j.Search in Google Scholar
Segura, D.M., Nurse, A.D., Mccourt, A., Phelps, R., and Segura. A. (2005). Chemistry of polyurethane adhesives and sealants. In: Cognard, P. (Ed.). Handbook of adhesives and sealants. Elsevier, Oxford, pp. 102–162.10.1016/S1874-5695(02)80004-5Search in Google Scholar
Sherck, N.J., Kim, H.C., and Won, Y. (2016). Elucidating a unified mechanistic scheme for the dbu-catalyzed ring-opening polymerization of lactide to poly(lactic acid). Macromolecules 49: 4699–4713, https://doi.org/10.1021/acs.macromol.6b00621.10.1021/acs.macromol.6b00621Search in Google Scholar
Soós, L., Deák, G., Kéki, S., and Zsuga, M. (1999). Anionic bulk oligomerization of ethylene and propylene carbonate initiated by bisphenol-A/base systems. J. Polym. Sci., Part A: Polym. Chem. 37: 545–550, https://doi.org/10.1002/(sici)1099-0518(19990301)37:5<545::aid-pola4>3.0.co;2-t.10.1002/(SICI)1099-0518(19990301)37:5<545::AID-POLA4>3.0.CO;2-TSearch in Google Scholar
Taylor, J.E., Bull, S.D., and Williams, J.M.J. (2012). Amidines, isothioureas, and guanidines as nucleophilic catalysts. Chem. Soc. Rev. 41: 2109–2121, https://doi.org/10.1039/c2cs15288f.Search in Google Scholar
Tomani, P.E. (2010). The LignoBoost process. Cellu. Chem. Tech. 44: 53–58.Search in Google Scholar
Tribot, A., Amer M., Alio, M.A., Baynast, H., Delattre, C., Pons, A., Mathias, J.D., Callois, J.M., Vial, C., Michaud, P., et al. (2019). Wood-lignin: supply, extraction processes and use as bio-based material. Eur. Polym. J. 112: 228–240, https://doi.org/10.1016/j.eurpolymj.2019.01.007.Search in Google Scholar
Zhang, X., Chen, M., Liu, C., Zhang, A., and Sun, R. (2015). Ring-opening graft polymerization of propylene carbonate onto xylan in an ionic liquid. Molecules 20: 6033–6047, https://doi.org/10.3390/molecules20046033.Search in Google Scholar PubMed PubMed Central
Zhang, X., Kim, Y., Islam, E., Taylor , M., Eberhardt, T.L., Hassan, E.B, Shmulsky, R. (2019). Rigid polyurethane foams containing lignin oxyalkylated with ethylene carbonate and polyethylene glycol. Ind. Crops Prod. 141: 111797, https://doi.org/10.1016/j.indcrop.2019.111797.Search in Google Scholar
© 2020 Walter de Gruyter GmbH, Berlin/Boston
