Skip to content
BY 4.0 license Open Access Published by De Gruyter Open Access March 31, 2020

Light-Induced ignition of Carbon Nanotubes and energetic nano-materials: a review on methods and advanced technical solutions for nanoparticles-enriched fuels combustion

  • Paolo Visconti EMAIL logo , Patrizio Primiceri , Roberto de Fazio , Luciano Strafella , Antonio Ficarella and Antonio Paolo Carlucci

Abstract

Aim of the present manuscript is to provide an overview of all possible methods and light source typologies used by the different research groups for obtaining the energetic nano-materials’ photo-ignition, showing the latest progress related to such phenomenon employing, also, alternative radiation sources to the common Xe lamp. In fact, the employment of a different source typology can open new usage prospects respect to those enabled by the Xe lamp, mainly due to its technological limitations. Therefore, several studies are faced to test light sources, such as lasers and LEDs, for igniting the nano-energetic materials (as CNTs mixed with metallic catalyzers, Al / CuO nano-particles, etc); these nano-materials are usefully employed for starting, in volumetric and controlled way, the combustion of air-fuel mixtures inside internal combustion engines, leading to significant benefits to the combustion process also in terms of efficiency, reliability, and emissions of pollutants. Several research works are presented in literature concerning the ignition of liquid / gaseous fuels, without nano-particles, employing laser sources (i.e laser-based plugs in place of the common spark plugs); therefore, an innovative solution is proposed that employs multi-point laser-plugs for inducing the ignition of nano-materials dispersed into the air-fuel mixture inside the cylinder, so further improving the combustion of the fuel in an internal combustion engine.

References

[1] Carlucci, A. P., P. Visconti, P. Primiceri, L. Strafella, A. Ficarella, and D. Laforgia. Photo-Induced Ignition of Different Gaseous Fuels Using Carbon Nanotubes Mixed with Metal Nanoparticles as Ignitor Agents. Comb. Sci. and Techn., Vol. 189, No. 6, 2016, pp. 937–953.10.1080/00102202.2016.1256880Search in Google Scholar

[2] Primiceri, P., R. de Fazio, L. Strafella, A. P. Carlucci, and P. Visconti. Photo-induced ignition phenomenon of carbon nanotubes by Xenon pulsed light: Ignition tests analysis, automotive and new potential applications, future developments. Journal of Applied Research and Technology, Vol. 15, No. 6, 2017, pp. 609–623.10.1016/j.jart.2017.08.001Search in Google Scholar

[3] Kofler, H., J. Tauer, G. Tartar, K. Iskra, J. Klausner, G. Herdin, and E. Wintner. An innovative solid-state laser for engine ignition. Laser Physics Letters, Vol. 4, No. 4, 2006, pp. 322–327.10.1002/lapl.200610106Search in Google Scholar

[4] O’Briant, S. A., S. B. Gupta, and S. S. Vasu. Prop. and Pow. Resea., Vol. 5, 2016, p. 1.Search in Google Scholar

[5] Pavel, N., M. Bärwinkel. P. Heinz, D. Brüggemann, G. Dearden, G. Croitoru, et al. Progress in Quantum Electronics, Vol. 58, 2018, p. 1.10.1016/j.pquantelec.2018.04.001Search in Google Scholar

[6] Yalin, A. P. High power fiber delivery for laser ignition applications. Optics Express, Vol. 21, S6, 2013, p. 1102.10.1364/OE.21.0A1102Search in Google Scholar PubMed

[7] Weinrotter, M., H. Kopecek, and E. Wintner. Laser Physics, Vol. 15, 2005, p. 947.Search in Google Scholar

[8] Weinrott, M. Laser Ignition of Internal Combustion Engines: Basic Laser and Ignition Optics Developments, Engine Application and Optical Diagnostics. GRIN Verlag, 2011.Search in Google Scholar

[9] Masaki, T., I. Takayuki, K. Kenji, and T. Takunori. Adv. In Solid-State Lasers: Dev. and Appl.s, Mikhail Grishin, 2010.Search in Google Scholar

[10] Tsunekane, M. and T. Taira. Yb:YAG/Cr:YAG passively Q-switched microlaser for ignition. 1st Laser Ignition Conference, April 23–26 2013, Yokohama, Japan, paper LIC4-4.Search in Google Scholar

[11] Tauer, J., H. Kofler, and E. Wintner. Laser-initiated ignition. Laser & Photonics Reviews, Vol. 4, No. 1, 2010, pp. 99–122.10.1002/lpor.200810070Search in Google Scholar

[12] Pavel, N., M. Tsunekane, and T. Taira. Composite, all-ceramics, high-peak power Nd:YAG/Cr(4+):YAG monolithic micro-laser with multiple-beam output for engine ignition. Optics Express, Vol. 19, No. 10, May 9, 2011, pp. 9378–9384.10.1364/OE.19.009378Search in Google Scholar PubMed

[13] Pavel, N., M. Tsunekane, and T. Taira. Laser Systems for Applications. Krzysztof Jakubczak, InTech, 2011.Search in Google Scholar

[14] Agarwal, A. K. and R. K. Prasad. Laser Ignition of Hydrogen Enriched Compressed Natural Gas (HCNG) Fueled Super-charged Engine. Laser Ignition Conference 2017, June 20–23 2017, Bucharest, Romania, paper LThA3.3.10.1364/LIC.2017.LThA3.3Search in Google Scholar

[15] Trewartha, S., R. Appleby, J. R. Gascooke, and J. G. Shapter. Propel. Expl. Pyrot., Vol. 43, 2018, p. 1.10.1002/prep.201800023Search in Google Scholar

[16] Kim, J. H., M. H. Cho, K. J. Kim, and S. H. Kim. Laser ignition and controlled explosion of nanoenergetic materials: The role of multi-walled carbon nanotubes. Carbon, Vol. 118, 2017, pp. 268–277.10.1016/j.carbon.2017.03.050Search in Google Scholar

[17] Liu, Y., D. Liu, and G. Liu. Energy conversion and ignition of iron nanoparticles by flash. Science China. Technological Sciences, Vol. 60, No. 12, 2017, pp. 1878–1884.10.1007/s11431-017-9144-6Search in Google Scholar

[18] Egan, G. C., K. T. Sullivan, T. Y. Olson, T. Y.-J. Han, M. A. Worsley, and M. R. Zachariah. Journal of Physical Chemistry, Vol. 51, 2016, p. 29023.10.1021/acs.jpcc.6b11081Search in Google Scholar

[19] Kim, J. H., S. B. Kim, M. G. Choi, D. H. Kim, K. T. Kim, H. M. Lee, and H. W. Lee. J. M. Kim S. H. Kim. Combustion and Flame, Vol. 162, 2015, p. 1448.10.1016/j.combustflame.2014.11.011Search in Google Scholar

[20] Kim, H. S., J. H. Kim, K. J. Kim, and S. H. Kim. Tuning the ignition and combustion properties of nanoenergetic materials by incorporating with carbon black nanoparticles. Combustion and Flame, Vol. 194, 2018, pp. 264–270.10.1016/j.combustflame.2018.05.006Search in Google Scholar

[21] Braidy, N., G. A. Botton, and A. Adronov. Oxidation of Fe Nanoparticles Embedded in Single-Walled Carbon Nanotubes by Exposure to a Bright Flash of White Light. Nano Letters, Vol. 2, No. 11, 2002, pp. 1277–1280.10.1021/nl025718mSearch in Google Scholar

[22] Visconti, P., P. Primiceri, D. Longo, L. Strafella, P. Carlucci, M. Lomascolo, A. Cretì, and G. Mele. Photo-ignition process of multiwall carbon nanotubes and ferrocene by continuous wave Xe lamp illumination. Beilstein Journal of Nanotechnology, Vol. 8, Jan. 13, 2017, pp. 134–144.10.3762/bjnano.8.14Search in Google Scholar PubMed PubMed Central

[23] Visconti, P., P. Primiceri, L. Strafella, A. Lay-Ekuakille, and A. P. Carlucci. Photo-induced combustion of gaseous fuels using carbon nanotubes as ignitor agents: Driving and measuring systems, characterizations, 2017 IEEE International Instrumentation and Measurement Technology Conference (I2MTC), May 22–25 2017, Turin, Italy, 2017, pp. 1–5.10.1109/I2MTC.2017.7969866Search in Google Scholar

[24] Visconti, P., P. Primiceri, R. de Fazio, A. P. Carlucci, and S. E. Mazzetto. Improved Photo-Ignition of Carbon Nanotubes/Ferrocene Using a Lipophilic Porphyrin under White Power LED Irradiation. Materials (Basel), Vol. 11, No. 1, 2018, p. 1.10.3390/ma11010127Search in Google Scholar PubMed PubMed Central

[25] Visconti, P., P. Primiceri, R. Tramis, D. Longo, L. Strafella, A. P. Carlucci. Programmable driving boards of Xenon flash lamps for photo ignition process of carbon nanotubes added to air/methane fuel mixture. 2016 IEEE 16th International Conference on Environment and Electrical Engineering (EEEIC), June 7–10 2016, Florance, Italy, pp. 1–6.Search in Google Scholar

[26] Saxena, G., and P. Soni. Nano Trends-A Journal of Nano Tech. & Its Appls, Vol. 20, 2018, p. 9.Search in Google Scholar

[27] Chavan, D., and A. T. Pise. Performance Investigation of an Automotive Car Radiator Operated With Nanofluid as a Coolant. Journal of Thermal Science and Engineering Applications, Vol. 6, No. 2, 2014, p. 1.10.1115/1.4025230Search in Google Scholar

[28] Kimulu, A. M., W. N. Mutuku, and N. M. Mutua. Int. Jou. of Advs in Scie. Research and Eng., Vol. 4, 2018, p. 17.10.31695/IJASRE.2018.32748Search in Google Scholar

[29] Dash, R. K., T. Borca-Tasciuc, A. Purkayastha, and G. Ramanath. Electrowetting on dielectric-actuation of microdroplets of aqueous bismuth telluride nanoparticle suspensions. Nanotechnology, Vol. 18, No. 47, 2007, p. 475711.10.1088/0957-4484/18/47/475711Search in Google Scholar

[30] Liu, H., X. Song, and T. Gao. [CET]. Chemical Engineering Transactions, Vol. 58, 2017, p. 1075.Search in Google Scholar

[31] Vadiraj, A., G. Manivasagam, K. Kamani, and V. S. Sreenivasan. Tribology in Industry, Vol. 34, 2012, p. 3.Search in Google Scholar

[32] Wu, Y. Y., W. C. Tsui, and T. C. Liu. Experimental analysis of tribo-logical properties of lubricating oils with nanoparticle additives. Wear, Vol. 262, No. 7-8, 2007, pp. 819–825.10.1016/j.wear.2006.08.021Search in Google Scholar

[33] Ali, M. K. A., H. Xianjun, M. A. A. Abdelkareem, M. Gulzar, and A. H. Elsheikh. Novel approach of the graphene nanolubricant for energy saving via anti-friction/wear in automobile engines. Tribology International, Vol. 124, 2018, pp. 209–229.10.1016/j.triboint.2018.04.004Search in Google Scholar

[34] Chen, Y., P. Renner, and H. Liang. Dispersion of Nanoparticles in Lubricating Oil: A Critical Review. Lubricants, Vol. 7, No. 1, 2019, p. 7.10.3390/lubricants7010007Search in Google Scholar

[35] Danczyk, S. A. and B. Chehroudi. Air Force Research Laboratory, PRSA, 2005.Search in Google Scholar

[36] Jiang, Y., S. Deng, S. Hong, J. Zhao, S. Huang, C. C. Wu, J. L. Gottfried, K. I. Nomura, Y. Li, S. Tiwari, R. K. Kalia, P. Vashishta, A. Nakano, and X. Zheng. Energetic Performance of Optically Activated Aluminum/Graphene Oxide Composites. ACS Nano, Vol. 12, No. 11, Nov. 27, 2018, pp. 11366–11375.10.1021/acsnano.8b06217Search in Google Scholar PubMed

[37] Özgür, T., M. Özcanli, and K. Aydin. Investigation of Nanoparticle Additives to Biodiesel for Improvement of the Performance and Exhaust Emissions in a Compression Ignition Engine. International Journal of Green Energy, Vol. 12, No. 1, 2015, pp. 51–56.10.1080/15435075.2014.889011Search in Google Scholar

[38] Kumar S. A. A., V. Raja, R. P. D. Raviram, and G. Sakthinathan. Impact of nano-silicon fuel additive on combustion, performance and emission of a twin cylinder CI engine. The 3rd International Conference on Design, Analysis, Manufacturing and Simulation (ICDAMS 2018), MATEC Web of Conferences, Vol. 172, 2018, Article id 02007.10.1051/matecconf/201817202007Search in Google Scholar

[39] Carlucci, A. P., B. Chehroudi, A. Ficarella, D. Laforgia, and L. Strafella. Carbon Nanotubes - Recent Progress (M. Rahman, ed.). Intechopen, London, 2018, p. 221.Search in Google Scholar

[40] Ficarella, A., A. P. Carlucci, B. Chehroudi, D. Laforgia, and L. Strafella. Multi-Walled Carbon Nanotubes (MWCNTs) bonded with Ferrocene particles as ignition agents for air-fuel mixtures. Fuel, Vol. 208, 2017, pp. 734–745.10.1016/j.fuel.2017.07.052Search in Google Scholar

[41] Carlucci, A. P., A. Ficarella, D. Laforgia, and L. Strafella. Combustion and performance characteristics of air-fuel mixtures ignited by means of photo-thermal ignition of Nano-Energetic Materials. Energy Procedia, Vol. 126, 2017, pp. 810–817.10.1016/j.egypro.2017.08.288Search in Google Scholar

[42] Danczyk, S. A. and B. Chehroudi. A novel distributed ignition method using single-wall carbon nanotubes (SWCNTS) and a low-power flashlight. Global Powertrain Congress World Powertrain Exposition, September 19–21 2006, Novi, Michigan, Air Force Research Laboratory, 2006.Search in Google Scholar

[43] Andronov, A. A., V. A. Gurin, A. V. Marugin, A. P. Savikin, D. E. Svyatoshenko, A. N. Tukhomirov, Yu. S. Utkin, and V. L. Khimich. Laser ignition in internal-combustion engines: Sparkless initiation. Technical Physics Letters, Vol. 40, No. 8, 2014, pp. 662–664.10.1134/S1063785014080021Search in Google Scholar

Received: 2019-09-09
Accepted: 2020-01-15
Published Online: 2020-03-31

© 2020 Paolo Visconti et al., published by De Gruyter

This work is licensed under the Creative Commons Attribution 4.0 International License.

Downloaded on 10.4.2024 from https://www.degruyter.com/document/doi/10.1515/rams-2020-0010/html
Scroll to top button