Abstract
Recent research on atrium energy efficiency design focuses mainly on the relationship between the architectural geometries and dimensions and the building energy consumption. Achieving referential significance has imposed restrictions on the flexibility of the spatial design of public buildings with atriums. Therefore, introducing dimensionless index parameters for atrium energy efficiency design resolves the contradiction between flexibility and universality regardless of the geometries and dimensions of the atrium. This research proposes three dimensionless energy efficiency index parameters for office buildings with atriums in severe cold region of China. These parameters are span-height ratio (SHR), atrium-building area ratio (ABAR), and orientation-weighted exposed length of side ratio (OWELSR). Annual heating energy consumption simulations are conducted according to the meteorological parameters of the city of Harbin. This analysis normalizes the quantitative outcomes of different types and dimensions of atriums by establishing quantitative relationship models of the dimensionless index parameters and the annual heating energy utilization intensity (EUI) of the building. The optimal value ranges of the dimensionless index parameters are defined to provide better guidance when designing energy efficiency office buildings with atriums in severe cold region of China.
Similar content being viewed by others
Abbreviations
- A :
-
area (m2)
- e :
-
ELS of the atrium (m)
- E :
-
ELS of the building (m)
- EUI:
-
energy utilization intensity (kWh/(m2·a))
- H :
-
height (m)
- R 2 :
-
goodness of fit
- S :
-
span (m)
- U-value:
-
heat transfer coefficient (W/(m2·K))
- α :
-
orientation compensation coefficient
- λ :
-
heat conductivity coefficient (W/(m·K))
- ANOVA:
-
analysis of variance
- CSWD:
-
Chinese Standard Weather Database
- EER:
-
energy efficiency ratio
- ELS:
-
exposed length of side
- EPS:
-
expanded polystyrene
- OWELSR:
-
orientation-weighted exposed length of side ratio
- SAR:
-
section aspect ratio
- SHR:
-
span-height ratio
- XPS:
-
extruded polystyrene
- ABAR:
-
atrium-building area ratio
References
Abanda FH, Byers L (2016). An investigation of the impact of building orientation on energy consumption in a domestic building using emerging BIM (Building Information Modelling). Energy, 97: 517–527.
Aldawoud A (2013). The influence of the atrium geometry on the building energy performance. Energy and Buildings, 57: 1–5.
Chang C, Zhu N, Yang K, Yang F (2018). Data and analytics for heating energy consumption of residential buildings: The case of a severe cold climate region of China. Energy and Buildings, 172: 104–115.
Chen C, Li Y, Li N, Wei S, Yang F, Ling H, Yu N, Han F (2018). A computational model to determine the optimal orientation for solar greenhouses located at different latitudes in China. Solar Energy, 165: 19–26.
Danielski I, Nair G, Joelsson A, Fröling M (2016). Heated atrium in multi-storey apartment buildings, a design with potential to enhance energy efficiency and to facilitate social interactions. Building and Environment, 106: 352–364.
Harkouss F, Fardoun F, Biwole PH (2018). Passive design optimization of low energy buildings in different climates. Energy, 165: 591–613.
Kusumowidagdo A, Sachari A, Widodo P (2016). Visitors’ perceptions on the important factors of atrium design in shopping centers: A study of Gandaria City Mall and Ciputra World in Indonesia. Frontiers of Architectural Research, 5: 52–62.
Lee MC, Kuo CH, Wang FJ (2016). Utilizing the building envelope for power generation and conservation. Energy, 97: 1–10.
Li H, Xu W, Yu Z, Wu J, Sun Z (2017). Application analyze of a ground source heat pump system in a nearly zero energy building in China. Energy, 125: 140–151.
Li H, Wang S, Cheung H (2018). Sensitivity analysis of design parameters and optimal design for zero/low energy buildings in subtropical regions. Applied Energy, 228: 1280–1291.
Mao N, Pan D, Song M, Li Z, Xu Y, Deng S (2017). Operating optimization for improved energy consumption of a TAC system affected by nighttime thermal loads of building envelopes. Energy, 133: 491–501.
Moosavi L, Mahyuddin N, Ghafar N (2015). Atrium cooling performance in a low energy office building in the Tropics, a field study. Building and Environment, 94: 384–394.
Nasrollahi N, Abdolahzadeh S, Litkohi S (2015). Appropriate geometrical ratio modeling of atrium for energy efficiency in office buildings. Journal of Building Performance, 6(1): 95–104.
Ostergard T, Jensen RL, Maagaard SE (2017). Early Building Design: Informed decision-making by exploring multidimensional design space using sensitivity analysis. Energy and Buildings, 142: 8–22.
Pan Y, Li Y, Huang Z, Wu G (2010). Study on simulation methods of atrium building cooling load in hot and humid regions. Energy and Buildings, 42: 1654–1660.
Pan L, Wei S, Chu LM (2018). Orientation effect on thermal and energy performance of vertical greenery systems. Energy and Buildings, 175: 102–112.
Premrov M, Žigart M, Žegarac Leskovar V (2018). Influence of the building shape on the energy performance of timber-glass buildings located in warm climatic regions. Energy, 149: 496–504.
Rundle CA, Lightstone MF, Oosthuizen P, Karava P, Mouriki E (2011). Validation of computational fluid dynamics simulations for atria geometries. Building and Environment, 46: 1343–1353.
Taleghani M, Tenpierik M, van den Dobbelsteen A (2014). Energy performance and thermal comfort of courtyard/atrium dwellings in the Netherlands in the light of climate change. Renewable Energy, 63: 486–497.
Tian Z, Zhang X, Jin X, Zhou X, Si B, Shi X (2018). Towards adoption of building energy simulation and optimization for passive building design: A survey and a review. Energy and Buildings, 158: 1306–1316.
Vujosevic M, Popovic M (2016). The comparison of the energy performance of hotel buildings using PROMETHEE decisionmaking method. Thermal Science, 20: 197–208.
Vujošević M, Krstić-Furundžić A (2017). The influence of atrium on energy performance of hotel building. Energy and Buildings, 156: 140–150.
Vujosevic M, Krstic-Furundzic A (2018). Dataset on the energy performance of atrium type hotel buildings. Data in Brief, 17: 1336–1347.
Wang L, Huang Q, Zhang Q, Xu H, Yuen RKK (2017). Role of atrium geometry in building energy consumption: The case of a fully air-conditioned enclosed atrium in cold climates, China. Energy and Buildings, 151: 228–241.
Žigart M, Kovačič Lukman R, Premrov M, Žegarac Leskovar V (2018). Environmental impact assessment of building envelope components for low-rise buildings. Energy, 163: 501–512.
Acknowledgements
The authors gratefully acknowledge the funding received from the Doctoral Research Fund of Shandong Jianzhu University, China (No. X18098Z).
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Li, H., Geng, G. & Xue, Y. Atrium energy efficiency design based on dimensionless index parameters for office building in severe cold region of China. Build. Simul. 13, 515–525 (2020). https://doi.org/10.1007/s12273-020-0610-9
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s12273-020-0610-9