Correction to: Scientific Reports https://doi.org/10.1038/srep45179, published online 23 March 2017
This article contains errors in Figure 5. The SEM images of the nanocomposites with 2.5 vol%, 5.0 vol% and 7.5 vol% BaTiO3 NFs synthesized at 210 °C for 12 h shown in panels d-f were incorrectly given as SEM images of P(VDF-HFP) based nanocomposites with 5.0 vol%, 10.0 vol% and 20.0 vol% BaTiO3 NFs synthesized at 210 °C for 24 h. The correct Figure 5 appears below as Fig. 1.
(a–c) SEM images of the nanocomposites with 5 vol% low aspect ratio BaTiO3 NFs synthesized at 210 °C for 2 h, 6 h and 12 h. (d–f) SEM images of the nanocomposites with 2.5 vol%, 5.0 vol% and 7.5 vol% high aspect ratio BaTiO3 NFs synthesized at 210 °C for 12 h.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made. The images or other third party material in this article are included in the article’s Creative Commons license, unless indicated otherwise in a credit line to the material. If material is not included in the article’s Creative Commons license and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this license, visit http://creativecommons.org/licenses/by/4.0/.
About this article
Cite this article
Zhang, D., Zhou, X., Roscow, J. et al. Author Correction: Significantly Enhanced Energy Storage Density by Modulating the Aspect Ratio of BaTiO3 Nanofibers. Sci Rep 10, 8750 (2020). https://doi.org/10.1038/s41598-020-65656-z
Published:
DOI: https://doi.org/10.1038/s41598-020-65656-z
Comments
By submitting a comment you agree to abide by our Terms and Community Guidelines. If you find something abusive or that does not comply with our terms or guidelines please flag it as inappropriate.
