We study the problem of evaluation of the influence of design of the metal receiver of a large-capacity tundish of slab continuous-casting machine on the decrease in the turbulence of flows in the case of deviation of the metal stream from the required position in the process of casting. We present the results of computer simulations of various types of deviations from the target point of input for the metal stream flowing from the steel-teeming ladle into the tundish. We perform the comparison of the distributions of metal flows in tundishes with metal receivers of different designs. We also give recommendations concerning the possibilities of weakening of the turbulence of flows in the analyzed cases.
Similar content being viewed by others
References
O. B. Isaev, “Improving the technology for the tundish refining of steel in order to elevate the quality of continuous-cast semifinished products and rolled plates,” Metallurg, No. 11, 42 – 46 (2009); English translation: Metallurgist, 53(11 – 12), 672 – 678 (2009).
S. V. Sukharev, A. V. Zabolotskii, P. V. Kotrovskii, and M. Yu. Turchin, “Influence of the design of metal receivers of slab continuous casting machines on the motion of flow in the tundish in the case of deviations of the metal stream from the required position. Part I. Statement of the Problem,” Novye Ogneupory, No. 11, 11 – 14 (2019).
Author information
Authors and Affiliations
Corresponding author
Additional information
Translated from Novye Ogneupory, No. 12, pp. 3 – 6, December, 2019.
1The first part of the present article was published in Novye Ogneupory, No. 11, pp. 11 – 14, 2019.
Rights and permissions
About this article
Cite this article
Sukharev, S.V., Zabolotskii, A.V., Kotrovskii, P.V. et al. Influence of the Design of Metal Receivers of Slab Continuous-Casting Machines on the Motion of Flow in the Tundish in the Case of Deviations of the Metal Stream from the Required Position. Part II. Procedure of Simulation1. Refract Ind Ceram 60, 539–542 (2020). https://doi.org/10.1007/s11148-020-00402-6
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11148-020-00402-6