Abstract
Steel structures subject to dynamic loads are prior to generate excessive vibration and noise. Viscoelastic treatment is an effective measure to mitigate the vibration and noise from thin-walled structures in a broad frequency range. H-shaped steel beams are widely used in civil engineering. So an experiment system is established and a series of impact hammer tests are conducted to assess the modal parameters, dynamic response and acoustic behaviour of an H-shaped steel beam coated with various viscoelastic treatments. Firstly, the spectra of the velocity response and acoustic radiation of the bare beam are analysed based on the tested data. Secondly, the resonance frequencies and modal loss factors of the beam with various viscoelastic treatments derived from the frequency response function are compared. Finally, the effect of the layout and thickness of viscoelastic patches on the mitigation of vibration and noise is discussed experimentally. It is shown that the modal loss factor of the first mode increases from 0.012 to 0.191 when the web is treated with 5 mm thick constrained layer damping (CLD). The viscoelastic patches on the web of the H-shaped beam are more effective to control the vibration and noise of the beam than the patches on the flanges. The viscoelastic treatment has distinct effect on the reduction of structural vibration and noise owing to the different dominant frequencies of vibration and noise as well as the frequency-dependent radiation efficiency. The normal velocity level of the H-shaped beam with an 8 mm thick web can be reduced by more than 10 dB and the sound pressure level around the beam about 8 dB when the web is partially covered with the constrained layer damping composed of 2.0 mm thick damping layer and 3.0 mm thick constraining layer.
Similar content being viewed by others
References
Akoussan K, Boudaoud H, Daya E, Carrera E (2015) Vibration modeling of multilayer composite structures with viscoelastic layers. Mechanics of Advanced Materials and Structures 22:136–149, DOI: https://doi.org/10.1080/15376494.2014.907951
Biswal DK, Mohanty SC (2019) Free vibration study of multilayer sandwich spherical shell panels with viscoelastic core and isotropic/laminated face layers. Composites Part B: Engineering 159:72–85, DOI: https://doi.org/10.1016/j.compositesb.2018.09.075
Chopra AK (2007) Dynamics of structures: Theory and applications to earthquake engineering, 3rd edition. Prentice Hall, Upper Saddle River, NJ, USA
DiTaranto RA (1965) Theory of vibratory bending for elastic and viscoelastic layered finite length beams. Journal of Applied Mechanics 32:881–886, DOI: 10.1115/1.3627330
Foin O, Nicolas J, Atalla N (1999) An efficient tool for predicting the structural acoustic and vibration response of sandwich plates in light or heavy fluid. Applied Acoustics 57(3): 213–242, DOI: https://doi.org/10.1016/S0003-682X(98)00059-0
Hao M, Rao MD (2005) Vibration and damping analysis of a sandwich beam containing a viscoelastic constraining layer. Journal of Composite Materials 39:1621–643, DOI: https://doi.org/10.1177/0021998305051124
Huang Z, Qin Z, Chu F (2014) Vibration and damping characteristics of sandwich plates with viscoelastic core. Journal of Vibration and Control 22:1876–1888, DOI: https://doi.org/10.1177/1077546314545527
Hujare PP, Sahasrabudhe AD (2014) Experimental investigation of damping performance of viscoelastic material using constrained layer damping treatment. Procedia Materials Science 5:726–33, DOI: https://doi.org/10.1016/j.mspro.2014.07.321
Johnson CD, Kienholz DA (1982) Finite element prediction of damping in structures with constrained viscoelastic layers, AIAA Journal 20:1284–1290, DOI: 10.2514/3.51190
Kerwin EM Jr (1959) Damping of flexural waves by a constrained viscoelastic layer. The Journal of the Acoustical Society of America 31:952–962, DOI: 10.1121/1.1907821
Kumar N, Singh SP (2010) Experimental study on vibration and damping of curved panel treated with constrained viscoelastic layer. Composite Structures 92:233–243, DOI: https://doi.org/10.1016/j.compstruct.2009.07.011
Li H, Cheng J, Sun W, Wen B (2016) Experimental study on the influence of modal parameters of thin cylindrical shell coated with constrained layer damping. Journal of Vibroengineering 18:1707–1722, DOI: 10.21595/jve.2016.16805
Liu L, Wang X, Zhou Y, Qin J (2019) Vibration mitigation effect investigation of a new slab track plate design. Sensors 19:168, DOI: 10.3390/s19010168
Mead DJ (2007) The measurement of the loss factors of beams and plates with constrained and unconstrained damping layers: A critical assessment. Journal of Sound and Vibration 300:744–762, DOI: https://doi.org/10.1016/j.jsv.2006.08.023
Mead DJ, Markus S (1969) The forced vibration of a three-layer, damped sandwich beam with arbitrary boundary conditions. Journal of Sound and Vibration 10:163–175, DOI: https://doi.org/10.1016/0022-460X(69)90193-X
Papagiannopoulos GA, Hatzigeorgiou GD (2011) On the use of the half-power bandwidth method to estimate damping in building structures. Soil Dynamics and Earthquake Engineering 31:1075–1079, DOI: https://doi.org/10.1016/j.soildyn.2011.02.007
Rao DK (1978) Frequency and loss factors of sandwich beams under various boundary conditions. Journal of Mechanical Engineering Science 20(5): 271–282, DOI: 10.1243/jmes_jour_1978_020_047_02
Ren S, Zhao G (2019) A four-node quadrilateral element for vibration and damping analysis of sandwich plates with viscoelastic core. Journal of Sandwich Structures & Materials 21:1072–1118, DOI: https://doi.org/10.1177/1099636217707714
Ross D, Ungar EE, Kerwin EM Jr (1959) Damping of plate flexural vibrations by means of viscoelastic laminae. Structural Damping 3:49–88, DOI: 10.20697/jasj.66.10_513
Shafer BM (2013) An overview of constrained-layer damping theory and application. Proceedings of meetings on acoustics ICA2013, June 2-7, Montreal, Canada, DOI: 10.1121/1.4800606
Torvik PJ, Runyon BD (2007a) Estimating the loss factors of plates with constrained layer damping treatments. AIAA Journal 45:1492–1500, DOI: 10.2514/1.24505
Torvik PJ, Runyon BD (2007b) Modifications to the method of modal strain energy for improved estimates of loss factors for damped structures. Shock and Vibration 14:339–353, DOI: 10.1155/2007/710498
Wang I (2011) An analysis of higher order effects in the half power method for calculating damping. Journal of Applied Mechanics 78:014501, DOI: 10.1115/1.4002208
Wang G, Wereley NM (2002) Spectral finite element analysis of sandwich beams with passive constrained layer damping. Journal of Vibration and Acoustics 124:376–386, DOI: 10.1115/1.1469007
Xie Z, Shepard WS Jr (2009) Development of a single-layer finite element and a simplified finite element modeling approach for constrained layer damped structures. Finite Elements in Analysis and Design 45:530–537, DOI: https://doi.org/10.1016/j.finel.2009.03.001
Zhang QJ, Sainsbury MG (2000) The Galerkin element method applied to the vibration of rectangular damped sandwich plates. Computers & Structures 74:717–730, DOI: https://doi.org/10.1016/S0045-7949(99)00068-1
Zhao J, Wong PK, Ma X, Xie Z, Xu J, Cristino VA (2019) Simplification of finite element modeling for plates structures with constrained layer damping by using single-layer equivalent material properties. Composites Part B: Engineering 2157:283–288, DOI: https://doi.org/10.1016/j.compositesb.2018.09.010
Acknowledgements
This work was supported by the National Natural Science Foundation of China (grant numbers 51608201, 51878565 and 51968025), the Jiangxi Provincial Department of Education (grant number GJJ 180295) and the China Scholarship Council.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Liu, Q., Li, X., Xu, P. et al. Acoustic Radiation and Dynamic Study of a Steel Beam Damped with Viscoelastic Material. KSCE J Civ Eng 24, 2132–2146 (2020). https://doi.org/10.1007/s12205-020-1969-y
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s12205-020-1969-y