Abstract
A novel processing technique was developed to produce an in-situ nano-composite powder based on \(\hbox {La}_{0.6}\hbox {Sr}_{0.4}\hbox {Co}_{0.2} \hbox {Fe}_{0.8}\hbox {O}_{3\text {-}{\updelta }}\) (LSCF6428) and \(\hbox {Gd}_{0.1}\hbox {Ce}_{0.9}\hbox {O}_{1.95}\) (GDC10) for application as cathode material in intermediate temperature solid oxide fuel cells (IT-SOFC). The nano-composite powder was produced using glycine-nitrate solution combustion technique starting from nitrates of six metal ions. The synthesized powder was characterized using X-ray diffraction (XRD), transmission electron microscopy (TEM), particle size and BET surface area analyses. XRD analysis of as-produced nano-composite powder confirmed the formation of desired phases right after combustion synthesis. The structural parameters of different phases present in the powders were estimated through Rietveld refinement of XRD data. To compare the electrical properties of nano-composite cathode powder produced through the present method, nano-powders of GDC10 and LSCF6428 were individually produced through glycine nitrate process and subsequently mixed through solid-state technique and characterized for functional properties. Using this in-situ nano-composite material, lower polarization resistance was achieved as compared to the LSCF–GDC composite produced from mechanical mixtures of nano-powders of GDC10 and LSCF6428 when used as cathode in GDC10 electrolyte-based symmetrical cell. The effects of cathode layer thickness and electrode firing temperature on the cathodic polarization resistance were studied using in-situ nano-composite cathode powder.
Similar content being viewed by others
References
Song C 2002 Catal. Today 77 17
Stambouli A B and Traversa E 2002 Renew. Sustain. Energy Rev. 6 433
Minh N Q 1993 J. Am. Ceram. Soc. 76 563
Brett D J L, Atkinson A, Brandon N P and Skinner S J 2008 Chem. Soc. Rev. 37 1568
Xia C and Liu M 2001 Solid State Ionics 144 249
Yamamoto O 2000 Electrochim. Acta 45 2423
Maguire E, Gharbage B, Marques F M B and Labrincha J A 2000 Solid State Ionics 127 329
Murray E P 2001 Solid State Ionics 143 265
Fleig J 2003 Annu. Rev. Mater. Res. 33 361
Rietveld H M 1969 J. Appl. Crystallogr. 2 65
Roisnel T and Rodríguez-Carvajal J 2000 Materials Science Forum, Proceedings of the seventh European powder diffraction Conference (EPDIC 7), p 118
Thompson P, Cox D and Hastings J 1987 J. Appl. Crystallogr. 20 79
Vesta (visualization for electronic and structural analysis) 2019 edition. Available: http://jp-minerals.org/vesta/en/download.html (accessed on 16 May 2019)
Patterson A L 1939 Phys. Rev. 56 978
ZView Software—AMETEK SI; 2017 edition. Available: http://www.scribner.com/software/68-general-electrochemistr376-zview-for-windows.html (accessed on 5 January 2019)
Brauer G and Gradinger H 1954 Z. Anorg. Allg. Chem. 276 209
Shannon R D 1976 Acta Crystallogr. Sect. A 32 751
Izuki M, Brito M E, Yamaji K, Kishimoto H, Cho D H and Shimonosono T 2011 J. Power Sources 196 7232
Molenda J, Świerczek K and Zajac W 2007 J. Power Sources 173 657
Zhao K, Kim B H, Norton M G and Ha S Y 2018 Front. Energy Res. 6 1
Acknowledgements
We thank J Kolte of IIT, Bombay, for his support in XRD measurement of the electrode samples.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Ahuja, A., Gautam, M., Sinha, A. et al. Effect of processing route on the properties of LSCF-based composite cathode for IT-SOFC. Bull Mater Sci 43, 129 (2020). https://doi.org/10.1007/s12034-020-2075-y
Received:
Accepted:
Published:
DOI: https://doi.org/10.1007/s12034-020-2075-y