Abstract
A model is proposed for intensification of the process of high-temperature vacuum removal of iron impurities from microporous aluminum oxide via purging of the particle layer with argon. In the temperature range characteristic of this process, the pressure of saturating vapors above pure iron is on the order of 0.1 mm Hg. For an impurity with a concentration of several particles per million, the figure is proportionally smaller, and this creates problems with evacuation of the chamber. The use of argon as a carrier gas destroys the rigid connection between the partial vapor pressure of the impurity and the pressure in the vacuum chamber. Calculations show that the argon flow under moderate vacuum 10–5 mm Hg with a mass flow rate on the order of 10–7 kg/(m2 s) provides a very deep purification.
Similar content being viewed by others
REFERENCES
Belov, G.V., Iorish, V.S., and Yungman, V.S.,High Temp., 2000, vol. 38, no. 2, p. 191.
Powell, A., Van Den, AvyleJ.,Damkroger, B., Szekely, J., and Pal, U., Metall. Mater. Trans. B, 1997, vol. 38, p. 1227.
Chapman, S. and Cowling, T.G., The Mathematical Theory of Non-Uniform Gases: An Account of the Kinetic Theory of Viscosity, Thermal Conduction, and Diffusion in Gases, Cambridge: Cambridge Univ. Press, 1952.
Bekman, I.N., Membranes in medicine. http://profbeckman.narod.ru/MedMemb.files/medmemb5.pdf.
Welty, J.R., Wicks, C.E., Wilson, R.E., and Rorrer, G.L., Fundamentals of Momentum, Heat and Mass Transfer, Hoboken: Wiley, 2008, 5th ed.
Ivanov, P.P., Zhuk, A.Z., and Vlaskin, M.S.,Vestn. Obedin.Inst. Vys. Temp. Ross. Akad. Nauk, 2018, vol. 1, p. 61.
Doremus, R.H., J. Appl. Phys., 2006, vol. 100, no. 10, 101301.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Shkol’nikov, E.I., Ivanov, P.P. Intensification of the Removal of Iron Impurities from Microporous Aluminum Oxide via Argon Blowing. High Temp 58, 121–125 (2020). https://doi.org/10.1134/S0018151X20010162
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1134/S0018151X20010162