Abstract
Purpose
Since reliability and extended service life of rotating machinery are the industries´ major concerns, fault diagnosis systems are constantly being improved, especially by artificial intelligence methods. Current paper proposes a diagnostic method integrating stationary and non-stationary signal processing techniques, selection of multiple attributes, and classification by machine-learning algorithm. The technique was applied to a small number of measured signals.
Method
The integrated method uses the ensemble empirical mode decomposition (EEMD) (which handles nonlinear and non-stationary data) for signal processing, and the support vector machine (SVM) for the classification of the machinery condition with a small number of signals. Augmented data and feature selection with a genetic algorithm are used to improve the accuracy of the analysis.
Results and Conclusions
Evaluation was obtained by vibration signals from a rotor test rig with different types of faults. Experimental results showed that the proposed method successfully identifies the rotor´s faults with accuracy of 95.19%.
This is a preview of subscription content, log in via an institution to check access.
Similar content being viewed by others
References
Al-Badour F, Sunar M, Cheded L (2011) Vibration analysis of rotating machinery using time–frequency analysis and wavelet techniques. Mech Syst Signal Process 25:2083–2101
Maheswari UR, Umamaheswari R (2017) Trends in non-stationary signal processing techniques applied to vibration analysis of wind turbine drive train—a contemporary survey. Mech Syst Signal Process 85:296–311
Liu R, Yang B, Zio E, Chen X (2018) Artificial intelligence for fault diagnosis of rotating machinery: a review. Mech Syst Signal Process 108:33–47
Stetco A, Dinmohammadi F, Zhao X, Robu V, Flynn D, Barness M, Keane J, Nenadic G (2019) Machine learning methods for wind turbine condition monitoring: a review. Renew Energy 133:620–635
Lazakis I, Raptodimos Y, Varelas T (2018) Predicting ship machinery system condition through analytical reliability tools and artificial neural networks. Ocean Eng 152:404–415
Muralidharan V, Sugumaran V (2012) A comparative study of Naïve Bayes classifier and Bayes net classifier for fault diagnosis of monoblock centrifugal pump using wavelet analysis. Appl Soft Comput 12:2023–2029
Su Z, Tang B, Qin Y (2015) Multi-fault diagnosis for rotating machinery based on orthogonal supervised linear local tangent space alignment and least square support vector machine. Neurocomputing 157:208–222
Baraldi P, Cannarile F, Di Maio F, Zio E (2016) Hierarchical k-nearest neighbours classification and binary differential evolution for fault diagnostics of automotive bearings operating under variable conditions. Eng Appl Artif Intell 56:1–13
Ma S, Chu F (2019) Ensemble deep learning-based fault diagnosis of rotor bearing systems. Comput Ind 105:143–152
Huang NE, Shen Z, Long SR, Wu MC, Shih HH, Zheng Q, Yen NC, Tung CC, Liu HH (1998) The empirical mode decomposition and the Hilbert spectrum for nonlinear and non-stationary time series analysis. Proc R Soc Lond Ser A 454:903–995
Lei Y, Lin J, He Z, Zuo MJ (2013) A review on empirical mode decomposition in fault diagnosis of rotating machinery. Mech Syst Signal Process 35:108–126
Yang Y, Yu D, Cheng J (2007) A fault diagnosis approach for roller bearing based on IMF envelope spectrum and SVM. Measurement 40:943–950
Jegadeeshwaran R, Sugumaran V (2015) Fault diagnosis of automobile hydraulic brake system using statistical features and support vector machines. Mech Syst Signal Process 52–53:436–446
Zhang X, Zhou J (2013) Multi-fault diagnosis for rolling element bearings based on ensemble empirical mode decomposition and optimized support vector machines. Mech Syst Signal Process 41:127–140
Rai A, Upadhyay SH (2018) An integrated approach to bearing prognostics based on EEMD-multi feature extraction, gaussian mixture models and Jensen-Rényi divergence. Appl Soft Comput 71:36–50
Zhong JH, Wong PK, Yang ZX (2018) Fault diagnosis of rotating machinery based on multiple probabilistic classifiers. Mech Sys Signal Process 108:99–114
Cheng J, Yu D, Yang Y (2008) A fault diagnosis approach for gears based on IMF AR model and SVM. Eurasip J Adv Signal Process. https://doi.org/10.1155/2008/647135
Samanta B (2004) Gear fault detection using artificial neural networks and support vector machines with genetic algorithms. Mech Syst Sig Process 18(5):625–644
Christianini N, Taylor JS (2000) An introduction to support vector machines and other kernel-based learning methods. Cambridge University Press, Cambridge
Kohavi R (1995) A study of cross-validation and bootstrap for accuracy estimation and model selection. IJCAI. Available via http://ai.stanford.edu/~ronnyk/accEst.pdf. Accessed 15 May 2018
Salamon J, Bello JP (2017) Deep convolutional neural networks and data augmentation for environmental sound classification. IEEE Signal Process Lett 24:279–283
Yang T, Hsieh H (2016) Classification of acoustic physiological signals based on deep learning neural networks with augmented features.In: Computing in Cardiology Conference, Vancouver, BC, Canada
Ganeriwala S, Patel S, Hartunga A (1999) The truth behind misalignment vibration spectra of rotating machinery. In: Proceedings of International Modal Analysis Conference, Florida, USA, pp 2078–2205
Author information
Authors and Affiliations
Corresponding author
Additional information
Publisher's Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
About this article
Cite this article
Lobato, T.H.G., da Silva, R.R., da Costa, E.S. et al. An Integrated Approach to Rotating Machinery Fault Diagnosis Using, EEMD, SVM, and Augmented Data. J. Vib. Eng. Technol. 8, 403–408 (2020). https://doi.org/10.1007/s42417-019-00167-4
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s42417-019-00167-4