Abstract
The investigation based on experiments and crystal plasticity simulation is carried out to undertake research on meso-deformation inhomogeneity of metals under cyclic loading at grain level. Symmetrical tension–compression cycle tests are performed on pure copper specimens to observe the inhomogeneous distribution of slip deformation and its evolution with cycle number. Cyclic hardening process and stable hysteretic behavior of pure copper under cyclic loading are simulated by applying a crystal plasticity constitutive model including nonlinear kinematic hardening associated with the polycrystalline representative volume element (RVE) constructed by Voronoi tessellation. Inhomogeneous deformation processes of materials under six different strain amplitudes are simulated by 1600 cycles, respectively. We discuss the variation law of the inhomogeneous meso-deformation distribution of material with the increase in cycle number, and research the rationality of characterizing the inhomogeneous deformation distribution and variation with the statistical standard deviation of the micro-longitudinal strain or the statistical average of the first principal strain based on the statistical analysis of the inhomogeneous deformation of the polycrystalline RVE model during the cycling process. It is found that these two parameters are related to and approximately inversely proportional to the length of measuring gauge.
Similar content being viewed by others
References
Allais L, Bornert M, Bretheau T, et al. Experimental characterization of the local strain field in a heterogeneous elastoplastic material. Acta Metall Mater. 2017;42(11):3865–80.
Delaire F, Raphanel JL, Rey C. Plastic heterogeneities of a copper multicrystal deformed in uniaxial tension: experimental study and finite element simulations. Acta Mater. 2000;48(5):1075–87.
Liu BC, Cao QL. Meso-deformation measurement of large grain polycrystalline aluminum samples. J Tsinghua Univ (Nat Sci Ed). 1994;5:26–31 (in Chinese).
Zhang N, Tong W. An experimental study on grain deformation and interactions in an Al-0.5%Mg multicrystal. Int J Plast. 2004;20(3):523–42.
Liu Y, Liu S, Deng C, et al. Inhomogeneous deformation of \(\{111\}\) \(<\)uvw\(>\) grain in cold rolled tantalum. J Mater Sci Technol. 2018;34(11):2178–82.
Murasawa G, Yeduru SR, Kohl M. Macroscopic inhomogeneous deformation behavior arising in single crystal Ni–Mn–Ga foils under tensile loading. Opt Lasers Eng. 2016;87:139–45.
Kerstin A, Berthold S. Formation of macroscopic twin bands and inhomogeneous deformation during cyclic tension-compression loading of the Mg-wrought alloy AZ3. Mater Sci Eng A. 2019;746:217–28.
Zhang KS, Shi YK, Ju JW. Grain-level statistical plasticity analysis on strain cycle fatigue of a FCC metal. Mech Mater. 2013;64:76–90.
Zhang KS, Ju JW, Li Z, et al. Micromechanics based fatigue life prediction of a polycrystalline metal applying crystal plasticity. Mech Mater. 2015;85:16–37.
Zhang MH, Shen XH, He L, et al. Application of differential entropy in characterizing the deformation inhomogeneity and life prediction of low-cycle fatigue of metals. Materials. 2018;11(10):1917–39.
Liu GL, Zhang KS, Zhong XC, et al. Analysis of meso-inhomogeneous deformation on a metal material surface under low-cycle fatigue. Acta Mech Solida Sin. 2017;30(6):557–72.
Wang Z, Li P. Voronoi cell finite element modelling of the intergranular fracture mechanism in polycrystalline alumina. Ceram Int. 2017;43(9):6967–75.
El SS, Hure J. Intergranular normal stress distributions in untextured polycrystalline aggregates. Eur J Mech A/Solids. 2018;72:354–73.
Huang X, Ding WF, Zhu YJ, et al. Crack propagation simulation of polycrystalline cubic boron nitride abrasive materials based on cohesive element method. Comput Mater Sci. 2017;138:302–14.
Tu XH, Shahba A, Shen JL, et al. Microstructure and property based statistically equivalent RVEs for polycrystalline-polyphase aluminum alloys. Int J Plast. 2019;115:168–292.
Moussa B, Toufik K, Cherif B, et al. Determination of the RVE size for polycrystal metals to predict monotonic and cyclic elastoplastic behavior: statistical and numerical approach with new criteria. Eur J Mech A/Solids. 2018;72:1–15.
Asim UB, Siddiq MA, Kartal ME. Representative volume element (RVE) based crystal plasticity study of void growth on phase boundary in titanium alloys. Comput Mater Sci. 2019;161:346–50.
Kalidindi SR, Bronkhorst CA, Anand L. Crystallographic texture evolution during bulk deformation processing of FCC metals. J Mech Phys Solids. 1992;40(3):537–69.
Arsenlis A, Parks D. Modeling the evolution of crystallographic dislocation density in crystal plasticity. J Mech Phys Solids. 2002;50(9):1979–2009.
Erieau P, Rey C. Modeling of deformation and rotation bands and of deformation induced grain boundaries in IF steel aggregate during large plane strain compression. Int J Plast. 2004;20(10):1763–88.
Zhang KS. Microscopic heterogeneity and macroscopic mechanical behavior of a polycrystalline material. Chin J Theor Appl Mech. 2004;36:714–23 (in Chinese).
Feng L, Zhang G, Zhang KS. Discussion of cyclic plasticity and viscoplasticity of single crystal nickel-based superalloy in large strain analysis: comparison of anisotropic macroscopic model and crystallographic model. Int J Mech Sci. 2004;46(8):1157–71.
Chen Y, Hu G, Lan Y, et al. Constitutive modeling of slip, twinning and detwinning for mg alloy and inhomogeneous evolution of microstructure. Acta Mech Solida Sin. 2018;31(4):493–511.
Zhang KS, Wu MS, Feng R. Simulation of microplasticity-induced deformation in uniaxially strained ceramics by 3-D Voronoi polycrystal modeling. Int J Plast. 2005;21(4):801–34.
Cailletaud G. A micromechanical approach to inelastic behaviour of metals. Int J Plast. 1992;8(1):55–73.
Hutchinson JW. Bounds and self-consistent estimates for creep of polycrystalline materials. Proc R Soc Lond Ser A Math Phys Sci. 1976;348(1652):101–27.
Chaboche JL. Constitutive equations for cyclic palsticity and cyclic viscoplasticity. Int J Plast. 1989;5(3):247–302.
Zhang KS, Shi YK, Xu LB, et al. Anisotropy of yielding hardening and micro inhomogeneity of deforming/rotating for a polycrystalline metal under cyclic tension–compression. Acta Metall Sin. 2011;10(47):1292–300 (in Chinese).
Pan J, Rice JR. Rate sensitivity of plastic flow and implications for yield-surface vertices. Int J Solids Struct. 1983;19(11):973–87.
Hutchinson JW. Elastic-plastic behaviour of polycrystalline metals and composites. Proc R Soc A Math Phys Eng Sci. 1970;319(1537):247–72.
Chang YW, Asaro RJ. An experimental study of shear localization in aluminum-copper single crystals. Acta Metall. 1981;29(1):241–57.
Hill R, Rice JR. Constitutive analysis of elastic-plastic crystals at arbitrary strain. J Mech Phys Solids. 1972;20(6):401–13.
Asaro RJ, Rice JR. Strain localization in ductile single crystals. J Mech Phys Solids. 1977;25(5):309–38.
Needleman A, Asaro RJ, Lemonds J, et al. Finite element analysis of crystalline solids. Comput Methods Appl Mech Eng. 1985;52(1):689–708.
Acknowledgements
This research was supported by the National Natural Science Foundation of China (Nos. 11632007 and 11472085) and the Project of Promoting the Basic Ability of Scientific Research of Young and Middle-aged Teachers in Universities of Guangxi (No. 2019KY1365), which are gratefully acknowledged.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Jin, L., Qin, S., Zeng, B. et al. The Meso-inhomogeneous Deformation of Pure Copper under Tension–Compression Cyclic Strain Loading. Acta Mech. Solida Sin. 33, 403–417 (2020). https://doi.org/10.1007/s10338-019-00135-1
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10338-019-00135-1