Abstract
Designing efficient and compact couplers is crucial in hybrid integration of plasmonic components with conventional silicon-on-insulator components. Taper-funnel structures are conventionally used to couple light from a silicon strip waveguide to a metal–dielectric–metal plasmonic waveguide. In this paper, we investigate the effect of different parameters of the metallic funnel and the vertically and laterally tapered silicon waveguide on the performance of the designed coupler. Numerical simulations indicate that the tuned coupler has an average coupling efficiency of 87% in the C-band. The designed 1.18-µm-long coupler has a shorter length compared to the previous designs, while its theoretical coupling efficiency is higher than 85% in the entire O, E, S, C, L, and U bands of optical communication.
Similar content being viewed by others
References
K. Shang, S. Pathak, C. Qin, S.B. Yoo, Low-loss compact silicon nitride arrayed waveguide gratings for photonic integrated circuits. IEEE Photonics J. 9(5), 1–5 (2017)
S.H. Badri, M.M. Gilarlue, S.G. Gavgani, Ultra-thin silicon-on-insulator waveguide bend based on truncated Eaton lens implemented by varying the guiding layer thickness. Photonics Nanostruct. Fundam. Appl. 39, 100766 (2020)
C. Li, D. Dai, Compact polarization beam splitter for silicon photonic integrated circuits with a 340-nm-thick silicon core layer. Opt. Lett. 42(21), 4243–4246 (2017)
S.H. Badri, M.M. Gilarlue, Ultrashort waveguide tapers based on Luneburg lens. J. Opt. 21(12), 125802 (2019)
M.M. Gilarlue, S.H. Badri, Photonic crystal waveguide crossing based on transformation optics. Opt. Commun. 450, 308–315 (2019)
S.H. Badri, M.M. Gilarlue, H. Soofi, H.R. Saghai, 3 × 3 slot waveguide crossing based on Maxwell’s fisheye lens. Opt. Eng. 58(9), 097102 (2019)
E. Ozbay, Plasmonics: merging photonics and electronics at nanoscale dimensions. Science 311(5758), 189–193 (2006)
D.K. Gramotnev, S.I. Bozhevolnyi, Plasmonics beyond the diffraction limit. Nat. Photonics 4(2), 83 (2010)
G. Veronis, S. Fan, Theoretical investigation of compact couplers between dielectric slab waveguides and two-dimensional metal–dielectric–metal plasmonic waveguides. Opt. Express 15(3), 1211–1221 (2007)
Z. Han, A. Elezzabi, V. Van, Experimental realization of subwavelength plasmonic slot waveguides on a silicon platform. Opt. Lett. 35(4), 502–504 (2010)
Y. Liu, Y. Lai, K. Chang, Plasmonic coupler for silicon-based micro-slabs to plasominc nano-gap waveguide mode conversion enhancement. J. Lightwave Technol. 31(11), 1708–1712 (2013)
C.-T. Chen et al., Design of highly efficient hybrid Si–Au taper for dielectric strip waveguide to plasmonic slot waveguide mode converter. J. Lightwave Technol. 33(2), 535–540 (2015)
B.Q. Zhu, H.K. Tsang, High coupling efficiency silicon waveguide to metal–insulator–metal waveguide mode converter. J. Lightwave Technol. 34(10), 2467–2472 (2016)
S.H. Badri, M.M. Gilarlue, Coupling silica waveguides to photonic crystal waveguides through multilayered Luneburg lens. JOSA B 37(1), 104–109 (2020)
S.H. Badri, M.M. Gilarlue, Coupling Si3N4 waveguide to SOI waveguide using transformation optics. Opt. Commun. 460, 125089 (2020)
S.H. Badri, M.M. Gilarlue, Coupling between silicon waveguide and metal–dielectric–metal plasmonic waveguide with lens-funnel structure. Plasmonics (2019). https://doi.org/10.1007/s11468-019-01085-7
P. Sharma, V.D. Kumar, Hybrid insulator metal insulator planar plasmonic waveguide-based components. IEEE Photonics Technol. Lett. 29(16), 1360–1363 (2017)
P. Sharma, V.D. Kumar, All optical logic gates using hybrid metal insulator metal plasmonic waveguide. IEEE Photonics Technol. Lett. 30(10), 959–962 (2018)
R.G. Mote, H.-S. Chu, P. Bai, E.-P. Li, Compact and efficient coupler to interface hybrid dielectric-loaded plasmonic waveguide with silicon photonic slab waveguide. Opt. Commun. 285(18), 3709–3713 (2012)
V. Patel, P. Sharma, V.D. Kumar, Efficient coupling from dielectric to hybrid plasmonic waveguide using curved taper. IEEE Photonics Technol. Lett. 31(4), 323–326 (2019)
J.T. Kim, S. Park, The design and analysis of monolithic integration of CMOS-compatible plasmonic waveguides for on-chip electronic–photonic integrated circuits. J. Lightwave Technol. 31(18), 2974–2981 (2013)
A. Sure, T. Dillon, J. Murakowski, C. Lin, D. Pustai, D.W. Prather, Fabrication and characterization of three-dimensional silicon tapers. Opt. Express 11(26), 3555–3561 (2003)
Author information
Authors and Affiliations
Corresponding author
Ethics declarations
Conflict of interest
The authors declare that they have no conflict of interest.
Additional information
Publisher's Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
About this article
Cite this article
Badri, S.H., Gilarlue, M.M. Coupling a silicon-on-insulator waveguide to a metal–dielectric–metal plasmonic waveguide through a vertical and lateral taper-funnel structure. Appl. Phys. B 126, 94 (2020). https://doi.org/10.1007/s00340-020-07454-z
Received:
Accepted:
Published:
DOI: https://doi.org/10.1007/s00340-020-07454-z