Abstract
In recent years, glass facades and extensive glassing areas have gained popularity in the built environment. However, thermal comfort and energy-savings in such buildings are still questionable. Advanced comfort-based control strategies have been proposed in order to fulfill a tradeoff between energy-saving and occupants’ thermal comfort. Yet, they could consume energy as the conventional control approach if the building is poorly designed. Thus, an adequate design of building envelope, namely glass facades, is essential to achieve the desired trade-off. The objective of this study is to understand and formulate the relationship between the mean radiant temperature (MRT) and glass facades design parameters in a comfort-controlled space in order to optimize building design for a trade-off between energy savings and thermal comfort. The combined use of numerical simulations, the design of experiments (DoE) technique and an optimization approach is adopted. For the investigations, a previously developed and validated dynamic simulation model is used. The combined use of numerical simulation and DoE aims to identify the significant parameters affecting the MRT, as well as to develop a metamodeling relationship between the considered design factors and MRT. Lastly, the developed meta-models are validated and used to determine a set of optimal solutions using the desirability function approach. The results indicate that the optimized design case allowed about 26% reduction of heating energy consumption compared to the base case design. Finally, the results show that an adequate design of the glazed envelope leads to improved thermal comfort conditions and reduce heating energy consumption.
Similar content being viewed by others
References
ADEME (2018). Chiffre-Clés Climate Air et Énergie. (in French)
Ahmad MW, Mourshed M, Yuce B, Rezgui Y (2016). Computational intelligence techniques for HVAC systems: A review. Building Simulation, 9: 359–398.
Alpuche MG, Gonzá lez I, Ochoa JM, Marincic I, Duarte A, Valdenebro E (2014). Influence of absorptance in the building envelope of affordable housing in warm dry climates. Energy Procedia, 57: 1842–1850.
Anderson T, Luther M (2012). Designing for thermal comfort near a glazed exterior wall. Architectural Science Review, 55: 186–195.
ASHRAE (2009). ASHRAE Handbook—Fundamentals (SI Edition). Atlanta, GA, USA: American Society of Heating, Refrigerating and Air-Conditioning Engineers.
Aste N, Angelotti A, Buzzetti M (2009). The influence of the external walls thermal inertia on the energy performance of well insulated buildings. Energy and Buildings, 41: 1181–1187.
Calvino F, La Gennusa M, Rizzo G, Scaccianoce G (2004). The control of indoor thermal comfort conditions: introducing a fuzzy adaptive controller. Energy and Buildings, 36: 97–102.
Castilla M, Álvarez JD, Ortega MG, Arahal MR (2013). Neural network and polynomial approximated thermal comfort models for HVAC systems. Building and Environment, 59: 107–115.
Catalina T, Iordache V (2012). IEQ assessment on schools in the design stage. Building and Environment, 49: 129–140.
Catalina T, Iordache V, Caracaleanu B (2013). Multiple regression model for fast prediction of the heating energy demand. Energy and Buildings, 57: 302–312.
CEN (2007). EN 15251: Indoor Environmental Input Parameters for Design and Assessment of Energy Performance of Buildings Addressing Indoor Air Quality, Thermal Environment, Lighting and Acoustics. European Committee for Standardization.
Chaudhuri T, Soh YC, Bose S, Xie LH, Li H (2016). On assuming Mean Radiant Temperature equal to air temperature during PMV-based thermal comfort study in air-conditioned buildings. In: Proceedings of the 42nd Annual Conference of the IEEE Industrial Electronics Society (IECON 2016), Florence, Italy.
Cheong C, Kim T, Leigh SB (2014). Thermal and daylighting performance of energy-efficient windows in highly glazed residential buildings: case study in Korea. Sustainability, 6: 7311–7333.
Chlela F, Husaunndee A, Inard C, Riederer P (2009). A new methodology for the design of low energy buildings. Energy and Buildings, 41: 982–990.
Clarke JA, Hensen JLM (2015). Integrated building performance simulation: Progress, prospects and requirements. Building and Environment, 91: 294–306.
Coleman DE, Montgomery DC (1993). A systematic approach to planning for a designed industrial experiment. Technometrics, 35: 1.
Corgnati SP, Fabrizio E, Raimondo D, Filippi M (2011). Categories of indoor environmental quality and building energy demand for heating and cooling. Building Simulation, 4: 97–105.
Derringer G, Suich R (1980). Simultaneous optimization of several response variables. Journal of Quality Technology, 12: 214–219.
Dhariwal J, Banerjee R (2017). An approach for building design optimization using design of experiments. Building Simulation, 10: 323–336.
Dias Pereira L, Raimondo D, Corgnati SP, Gameiro da Silva M (2014). Energy consumption in schools—A review paper. Renewable and Sustainable Energy Reviews, 40: 911–922.
Donaisky E, Oliveira GHC, Freire RZ, Mendes N (2007). PMV-based predictive algorithms for controlling thermal comfort in building plants. In: Proceedings of IEEE International Conference on Control Applications, Singapore.
Enescu D (2017). A review of thermal comfort models and indicators for indoor environments. Renewable and Sustainable Energy Reviews, 79: 1353–1379.
Erakovic L, Evans B (2012). Use of PMV control to improve energy efficiency in comfort cooling applications. In: Proceedings of 9th International Conference on CFD in the Minerals and Process Industries, Melbourne, Australia.
Fanger PO (1970). Thermal Comfort: Analysis and Applications in Environmental Engineering. Copenhagen, Denmark: Danish Technical Press.
Feist W, Schnieders J, Dorer V, Haas A (2005). Re-inventing air heating: Convenient and comfortable within the frame of the Passive House concept. Energy and Buildings, 37: 1186–1203.
Ferreira PM, Ruano AE, Silva S, Conceição EZE (2012). Neural networks based predictive control for thermal comfort and energy savings in public buildings. Energy and Buildings, 55: 238–251.
Freire RZ, Oliveira GHC, Mendes N (2008). Predictive controllers for thermal comfort optimization and energy savings. Energy and Buildings, 40: 1353–1365.
Hamdi M, Lachiver G (1998). A fuzzy control system based on the human sensation of thermal comfort. In: Proceedings of IEEE International Conference on Fuzzy Systems, Anchorage, AK, USA.
Harkouss F, Fardoun F, Biwole PH (2018). Optimization approaches and climates investigations in NZEB—A review. Building Simulation, 11: 923–952.
Harrington EC (1965). The Desirability Function. Industrial Quality Control, 21: 494–498.
Hawila AAW, Merabtine A, Troussier N (2017). Numerical and experimental investigation on the thermal behavior of the building integrating occupant thermal comfort. In: Proceedings of International Conference on Materials and Energy, Tianjin, China.
Hawila AAW, Merabtine A, Chemkhi M, Bennacer R, Troussier N (2018). An analysis of the impact of PMV-based thermal comfort control during heating period: A case study of highly glazed room. Journal of Building Engineering, 20: 353–366.
Hawila AAW, Merabtine A, Troussier N, Bennacer R (2019). Combined use of dynamic building simulation and metamodeling to optimize glass facades for thermal comfort. Building and Environment, 157: 47–63.
Hoovestol RA, Mikuls TR (2011). Environmental exposures and rheumatoid arthritis risk. Current Rheumatology Reports, 13: 431–439.
Hoyt T, Arens E, Zhang H (2015). Extending air temperature setpoints: Simulated energy savings and design considerations for new and retrofit buildings. Building and Environment, 88: 89–96.
Hwang RL, Shu SY (2011). Building envelope regulations on thermal comfort in glass facade buildings and energy-saving potential for PMV-based comfort control. Building and Environment, 46: 824–834.
ISO (2005). ISO 7730: Ergonomics of the Thermal Environment Analytical Determination and Interpretation of Thermal Comfort Using Calculation of the PMV and PPD Indices and Local Thermal Comfort Criteria.
Jaffal I, Inard C, Ghiaus C (2009). Fast method to predict building heating demand based on the design of experiments. Energy and Buildings, 41: 669–677.
Liang J, Du R (2005). Thermal comfort control based on neural network for HVAC application. In: Proceedings of IEEE Conference on Control Applications, Toronto, Canada.
Jin Q, Overend M (2017). A comparative study on high-performance glazing for office buildings. Intelligent Buildings International, 9: 181–203.
Kang DH, Mo PH, Choi DH, Song SY, Yeo MS, Kim KW (2010). Effect of MRT variation on the energy consumption in a PMVcontrolled office. Building and Environment, 45: 1914–1922.
Kolokotsa D, Tsiavos D, Stavrakakis GS, Kalaitzakis K, Antonidakis E (2001). Advanced fuzzy logic controllers design and evaluation for buildings’ occupants thermal–visual comfort and indoor air quality satisfaction. Energy and Buildings, 33: 531–543.
Kolokotsa D (2003). Comparison of the performance of fuzzy controllers for the management of the indoor environment. Building and Environment, 38: 1439–1450.
Lee JW, Jung HJ, Park JY, Lee JB, Yoon Y (2013). Optimization of building window system in Asian regions by analyzing solar heat gain and daylighting elements. Renewable Energy, 50: 522–531.
Marszal AJ, Heiselberg P, Bourrelle JS, Musall E, Voss K, Sartori I, Napolitano A (2011). Zero Energy Building—A review of definitions and calculation methodologies. Energy and Buildings, 43: 971–979.
MEDDE (2011). Réglementation Thermique 2012: Un Saut Énergétique Pour Les Bâtiments Neufs. (in French)
Merabtine A, Maalouf C, Al Waheed Hawila A, Martaj N, Polidori G (2018). Building energy audit, thermal comfort, and IAQ assessment of a school building: A case study. Building and Environment, 145: 62–76.
Montgomery DC (2009). Introduction to Statistical Quality Control, 6th edn. Hoboken, NJ, USA: John Wiley & Sons.
Montgomery DC (2017). Design and Analysis of Experiments, 9th edn. Hoboken, NJ, USA: John Wiley & Sons.
Nejat P, Jomehzadeh F, Taheri MM, Gohari M, Abd Majid MZ (2015). A global review of energy consumption, CO2 emissions and policy in the residential sector (with an overview of the top ten CO2 emitting countries). Renewable and Sustainable Energy Reviews, 43: 843–862.
Nelder JA, Mead R (1965). A simplex method for function minimization. The Computer Journal, 7: 308–313.
Nouvel R, Alessi F (2012). A novel personalized thermal comfort control, responding to user sensation feedbacks. Building Simulation, 5: 191–202.
O’Callaghan PW, Probert SD (1977). Sol-air temperature. Applied Energy, 3: 307–311.
Poirazis H, Blomsterberg Å, Wall M (2008). Energy simulations for glazed office buildings in Sweden. Energy and Buildings, 40: 1161–1170.
Ruano A, Pesteh S, Silva S, Duarte H, Mestre G, Ferreira PM, Khosravani H, Horta R (2016). PVM-based intelligent predictive control of HVAC systems. IFAC-PapersOnLine, 49: 371–376.
Sadeghifam AN, Zahraee SM, Meynagh MM, Kiani I (2015). Combined use of design of experiment and dynamic building simulation in assessment of energy efficiency in tropical residential buildings. Energy and Buildings, 86: 525–533.
Široký J, Oldewurtel F, Cigler J, Prívara S (2011). Experimental analysis of model predictive control for an energy efficient building heating system. Applied Energy, 88: 3079–3087.
Stavrakakis GM, Zervas PL, Sarimveis H, Markatos NC (2012). Optimization of window-openings design for thermal comfort in naturally ventilated buildings. Applied Mathematical Modelling, 36: 193–211.
Taleghani M, Tenpierik M, Kurvers S, van den Dobbelsteen A (2013). A review into thermal comfort in buildings. Renewable and Sustainable Energy Reviews, 26: 201–215.
Thalfeldt M, Pikas E, Kurnitski J, Voll H (2013). Facade design principles for nearly zero energy buildings in a cold climate. Energy and Buildings, 67: 309–321.
Tzempelikos A, Bessoudo M, Athienitis AK, Zmeureanu R (2010). Indoor thermal environmental conditions near glazed facades with shading devices—Part II: Thermal comfort simulation and impact of glazing and shading properties. Building and Environment, 45: 2517–2525.
US Department of Labor (2012). Occupational Outlook Handbook, 2012–13 Edition. Medical Assistants. Bureau of Labor Statistics. Availabe at http://www.bls.gov/ooh/healthcare/medicalassistants.htm.
Vanhoutteghem L, Skarning GCJ, Hviid CA, Svendsen S (2015). Impact of facade window design on energy, daylighting and thermal comfort in nearly zero-energy houses. Energy and Buildings, 102: 149–156.
Walikewitz N, Jänicke B, Langner M, Meier F, Endlicher W (2015). The difference between the mean radiant temperature and the air temperature within indoor environments: A case study during summer conditions. Building and Environment, 84: 151–161.
Wetter M, Zuo W, Nouidui TS (2001a). Modeling of heat transfer in rooms in the Modelica “buildings” library. In: Proceedings of the 12th International IBPSA Building Simulatin Conference, Sydney, Australia.
Wetter M, Zuo W, Nouidui TS (2001b). Recent Developments of the Modelica ‘Buildings’ Library for Building Energy and Control Systems. In: Proceedings of the 8th International Modelica Conference, Dresden, Germany.
Wetter M, Zuo WD, Nouidui TS, Pang X (2014). Modelica buildings library. Journal of Building Performance Simulation, 7: 253–270.
Williams J, Mitchell R, Raicic V, Vellei M, Mustard G, Wismayer A, Yin XZ, Davey S, Shakil M, Yang YZ, Parkin A, Coley D (2016). Less is more: A review of low energy standards and the urgent need for an international universal zero energy standard. Journal of Building Engineering, 6: 65–74.
Xu Z, Hu G, Spanos CJ, Schiavon S (2017). PMV-based eventtriggered mechanism for building energy management under uncertainties. Energy and Buildings, 152: 73–85.
Zhao H, Magoulès F (2012). A review on the prediction of building energy consumption. Renewable and Sustainable Energy Reviews, 16: 3586–3592.
Zhou G, Fu L, Li X (2015). Optimisation of ultrasound-assisted extraction conditions for maximal recovery of active monacolins and removal of toxic citrinin from red yeast rice by a full factorial design coupled with response surface methodology. Food Chemistry, 170: 186–192.
Zomorodian ZS, Tahsildoost M, Hafezi M (2016). Thermal comfort in educational buildings: A review article. Renewable and Sustainable Energy Reviews, 59: 895–906.
Zomorodian ZS, Tahsildoost M (2017). Assessment of window performance in classrooms by long term spatial comfort metrics. Energy and Buildings, 134: 80–93.
Acknowledgements
This work was supported by the Conseil régional de Champagne-Ardenne (CRCA) and the Fonds européen de développement économique et régional (FEDER).
Author information
Authors and Affiliations
Corresponding author
Electronic Supplementary Material
Rights and permissions
About this article
Cite this article
Hawila, A.AW., Merabtine, A. & Troussier, N. Metamodeling of mean radiant temperature to optimize glass facade design in PMV-based comfort controlled space. Build. Simul. 13, 271–286 (2020). https://doi.org/10.1007/s12273-019-0580-y
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s12273-019-0580-y