Skip to main content
SpringerLink
Log in

Modeling of water wicking along fiber/matrix interface voids in unidirectional carbon/vinyl ester composites

  • Research paper
  • Published:
Microfluidics and Nanofluidics Aims and scope Submit manuscript

Abstract

Void formation at the fiber/matrix (F/M) interface is known to be a primary structural defect in a composite material. It is a major factor that contributes to the water uptake in composite materials for underwater applications. We develop a mathematical model to describe the kinetics of water uptake in unidirectional fiber reinforced resin composites containing voids. By using a one-dimensional two-phase fluid flow model with parameters derived from Microcomputed X-ray tomography (µCT), we predict the water wicking process in carbon/vinylester (CF/VE) panels containing capillary voids at the F/M interphase. The capillary driven flow is impeded by viscous forces and the compressed air bubble, trapped between the two flow fronts. In particular, our calculation indicates that the effective contact angle at the F/M interface in CF/VE composite is 29.7 ± 0.1° for the equivalent capillary radius of 1.2 µm. The results are validated by comparing the simulated water absorption to the experimental data for CF/VE composite specimens of three different sizes immersed in sea water.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Log in via an institution

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Institutional subscriptions

Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5
Fig. 6

Similar content being viewed by others

References

  • Anderson R, Bayer J, Hofer L (1965) Linear solutions of Fick's law. Ind Eng Chem Process Des Dev 4(2):167–171

    Article  Google Scholar 

  • Bush JWM (2014) 18.357 Interfacial phenomena, fall 2010. Retrieved from https://math.mit.edu/~bush/wordpress/wp-content/uploads/2018/02/18.357-LecNotes-2010.pdf

  • Carlsson LA, Du E (2018) Water uptake in polymer composites with voids. In: durability of composites in a marine environment 2, Springer, pp 33–57

  • Drzal LT, Rich MJ, Lloyd PF (1983) Adhesion of graphite fibers to epoxy matrices: I. The role of fiber surface treatment. The Journal of Adhesion 16(1):1–30

    Article  Google Scholar 

  • Erhard G, Thompson M (2006) Designing with plastics. Hanser Munich, Germany

    Book  Google Scholar 

  • Fichera M (2015) Transport of seawater and its influence on the transverse tensile strength of unidirectional composite materials (Master's thesis, Florida Atlantic University).

  • Fichera M, Carlsson LA (2016) Moisture transport in unidirectional carbon/vinylester panels with imperfect fiber/matrix interface. J Compos Mater 50(6):751–760

    Article  Google Scholar 

  • Grant T, Bradley W (1995) In-situ observations in SEM of degradation of graphite/epoxy composite materials due to seawater immersion. J Compos Mater 29(7):852–867

    Article  Google Scholar 

  • Hsieh Y-L (1995) Liquid transport in fabric structures. Text Res J 65(5):299–307

    Article  Google Scholar 

  • Humeau C, Davies P, Jacquemin F (2016) Moisture diffusion under hydrostatic pressure in composites. Mater Des 96:90–98

    Article  Google Scholar 

  • LeBel F, Fanaei AE, Ruiz É, Trochu F (2014) Prediction of optimal flow front velocity to minimize void formation in dual scale fibrous reinforcements. IntJ Mater Form 7(1):93–116

    Article  Google Scholar 

  • Leclerc JS, Ruiz E (2008) Porosity reduction using optimized flow velocity in resin transfer molding. Composites A 39(12):1859–1868

    Article  Google Scholar 

  • Little JE, Yuan X, Jones MI (2012) Characterisation of voids in fibre reinforced composite materials. NDT & E Int 46:122–127

    Article  Google Scholar 

  • Liu L, Zhang B, Wu Z, Wang D (2005) Effects of cure pressure induced voids on the mechanical strength of carbon/epoxy laminates. J Mater Sci Technol 21(1):87–91

    Google Scholar 

  • Mallick PK (2007) Fiber-reinforced composites: materials, manufacturing, and design, CRC Press.

  • Njionhou A, Berthet F, Castanié B (2013) Effects of process parameters on the mechanical properties and morphology of stitched and non-stitched carbon/epoxy liquid resin-infused NCF laminate, out of autoclave and out of oven. In J Adv Manuf Technol 65(9–12):1289–1302

    Article  Google Scholar 

  • Park CH, Woo L (2011) Modeling void formation and unsaturated flow in liquid composite molding processes: a survey and review. J Reinf Plast Compos 30(11):957–977

    Article  Google Scholar 

  • Patel N, Lee LJ (1995) Effects of fiber mat architecture on void formation and removal in liquid composite molding. Polym Compos 16(5):386–399

    Article  Google Scholar 

  • Pomies F (1992) Degradation of composite materials in a marine environment (Master's thesis, Florida Atlantic University)

  • Qadry S, Roshdy T, Knox D, Phillips E (1999) Model development for O2 and N2 permeation rates through CZ-resin vials. Int J Pharm 188(2):173–179

    Article  Google Scholar 

  • Rajagopalan D, Aneja AP, Marchal JM (2001) Modeling capillary flow in complex geometries. Text Res J 71(9):813–821

    Article  Google Scholar 

  • Stabler WR, Tatterson GB, Sadler RL, El-Shiekh AH (1992) Void minimization in the manufacture of carbon fiber composites by resin transfer molding. SAMPE Quarterly (Society of Aerospace Material and Process Engineers); (United States), 23(2).

  • Standard A (2004) D5229/D5229M-04. Standard test method for moisture absorption

  • Strong AB (2008) Fundamentals of composites manufacturing: materials, methods and applications. Society of Manufacturing Engineers

  • Thomason J (1995) The interface region in glass fibre-reinforced epoxy resin composites: 2. Water absorption, voids and the interface. Composites 7(26):477–485

    Article  Google Scholar 

  • Weitsman YJ (2011) Fluid effects in polymers and polymeric composites. Springer Science & Business Media

  • Wu X-F, Dzenis YA (2006) Droplet on a fiber: geometrical shape and contact angle. Acta Mech 185(3–4):215–225

    Article  Google Scholar 

  • Xueshu L, Fei C (2016) A review of void formation and its effects on the mechanical performance of carbon fiber reinforced plastic. Eng Trans 64(1):33–51

    Google Scholar 

Download references

Acknowledgements

This research is based upon work supported by the National Science Foundation under Grant No.1562062. The authors acknowledge the μ-VIS X-ray Imaging Centre at the University of Southampton for provision of tomographic imaging facilities, supported by EPSRC grant EP-H01506X.

Author information

Authors and Affiliations

  1. Department of Physics, Florida Atlantic University, Boca Raton, FL, USA

    Kalpani N. U. Galpayage Dona

  2. Department of Ocean and Mechanical Engineering, Florida Atlantic University, 777 Glades, Boca Raton, FL, 33431, USA

    E. Du & Leif A. Carlsson

  3. Faculty of Engineering and the Environment, University of Southampton, Southampton, SO17 1BK, UK

    Daniel McKay Fletcher & Richard P. Boardman

Authors
  1. Kalpani N. U. Galpayage Dona
    View author publications

    You can also search for this author in PubMed Google Scholar

  2. E. Du
    View author publications

    You can also search for this author in PubMed Google Scholar

  3. Leif A. Carlsson
    View author publications

    You can also search for this author in PubMed Google Scholar

  4. Daniel McKay Fletcher
    View author publications

    You can also search for this author in PubMed Google Scholar

  5. Richard P. Boardman
    View author publications

    You can also search for this author in PubMed Google Scholar

Corresponding author

Correspondence to E. Du.

Ethics declarations

Conflict of interest

The authors declare no conflict of interest.

Additional information

Publisher's Note

Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.

Electronic supplementary material

Below is the link to the electronic supplementary material.

Supplementary file1 (DOCX 67 kb)

Rights and permissions

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Galpayage Dona, K.N.U., Du, E., Carlsson, L.A. et al. Modeling of water wicking along fiber/matrix interface voids in unidirectional carbon/vinyl ester composites. Microfluid Nanofluid 24, 31 (2020). https://doi.org/10.1007/s10404-020-02332-8

Download citation

  • Received:

  • Accepted:

  • Published:

  • DOI: https://doi.org/10.1007/s10404-020-02332-8

Keywords

Search

Navigation