Abstract
With the help of density functional theory (DFT) calculations, Mg-Sc-Y alloys with various Y content were designed and produced. The single-phase Mg-Sc-Y alloys were composed of a typical peritectic microstructure with internal Sc-rich zones surrounded by Y-rich zones. With increasing Y content, the hydrogen evolution rates decreased significantly to 0.13 mL/cm2/day and increased slightly afterward. This was attributed to the combined effect of a decrease in the thermodynamic driving force for corrosion, surface layer improvement, and an increase in the number of galvanic couples between the Sc-rich and Y-rich zones.
Similar content being viewed by others
References
[1] Z. Wu, R. Ahmad, B. Yin, S. Sandlöbes, and W.A. Curtin: Science, 2018, vol. 359, pp. 447-52.
[2] A.R. Wu, and C.Q. Xia: Mater. Des., 2007, vol. 28, pp. 1963-7.
C.H. Caceres: Metall. Mater. Trans. A Phys. Metall. Mater. Sci., 2007, vol. 38 A, pp. 1649-62.
[4] S. Eslami, M. Hasbullah, and H. Jafari: Mater. Des., 2011, vol. 32, pp. 2596-603.
[5] W. Xu, N. Birbilis, G. Sha, Y. Wang, J.E. Daniels, Y. Xiao, and M. Ferry: Nat. Mater., 2015, vol. 14, pp. 1229-35.
[6] M. Esmaily, J.E. Svensson, S. Fajardo, N. Birbilis, G.S. Frankel, S. Virtanen, R. Arrabal, S. Thomas, and L.G. Johansson: Prog. Mater. Sci., 2017, vol. 89, pp. 92-193.
[7] A. Atrens, G.L. Song, M. Liu, Z. Shi, F. Cao, and M.S. Dargusch: Adv. Eng. Mater., 2015, vol. 17, pp. 400-53.
S. Virtanen: Mater. Sci. Eng. B Solid-State Mater. Adv. Technol., 2011, vol. 176, pp. 1600-8.
[9] G. Song, and A. Atrens: Adv. Eng. Mater., 2007, vol. 9, pp. 177-83.
[10] R. Xin, B. Li, L. Li, and Q. Liu: Mater. Des., 2011, vol. 32, pp. 4548-52.
[11] S. Thomas, N. V. Medhekar, G.S. Frankel, and N. Birbilis: Curr. Opin. Solid State Mater. Sci., 2015, vol. 19, pp. 85-94.
[12] K. Gusieva, C.H.J. Davies, J.R. Scully, and N. Birbilis: Int. Mater. Rev., 2015, vol. 60, pp. 169-94.
[13] G.L. Song, and D.H. Stjohn: Index-corrosion of magnesium alloys, Woodhead, Cambridge, 2011, pp. 618-40.
[14] G. Song, B. Johannesson, S. Hapugoda, and D. StJohn: Corros. Sci., 2004, vol. 46, pp. 955-77.
[15] Y. Ding, C. Wen, P. Hodgson, and Y. Li: J. Mater. Chem. B, 2014, vol. 2, pp. 1912-33.
[16] M.M. Avedesian, and H. Baker: ASM Specialty Handbook - Magnesium and Magnesium Alloys, ASM International, Ohio, 1999, pp. 194-210.
[17] M. Pourbaix: Atlas of electrochemical equilibria in aqueous solutions, 2nd ed., NACE International, Houston, 1974, pp. 122-428.
[18] C.M. Liu, X.R. Zhu, and H.T. Zhou: Magnesium alloy phase atlas, Central South University Press, Changsha, 2006, pp. 4-320.
[19] C. Xu, and W. Gao: Mater. Res. Innov., 2000, vol. 3, pp. 231-5.
[20] H.S. Brar, J.P. Ball, I.S. Berglund, J.B. Allen, and M. V. Manuel: Acta Biomater., 2013, vol. 9, pp. 5331-40.
Y.C. Lee, A.K. Dahle, and D.H. Stjohn: Metall. Mater. Trans. A Phys. Metall. Mater. Sci., 2000, vol. 31, pp. 2895-906.
[22] J. Meng, W. Sun, Z. Tian, X. Qiu, and D. Zhang: Corrosion performance of magnesium (Mg) alloys containing rare-earth (RE) elements, Woodhead, Cambridge, 2013, pp. 38-58.
[23] N.D. Lang, and W. Kohn: Phys. Rev. B, 1971, vol. 3, pp. 1215-23.
[24] Z. Luo, H. Zhu, T. Ying, D. Li, and X. Zeng: Surf. Sci., 2018, vol. 672-673, pp. 68-74.
[25] G. Kresse, and J. Hafner: Phys. Rev. B, 1993, vol. 47, pp. 558-61.
[26] J.P. Perdew, K. Burke, and M. Ernzerhof: Phys. Rev. Lett., 1996, vol. 77, pp. 3865-8.
[27] P.E. Blöchl: Phys. Rev. B, 1994, vol. 50, pp. 17953-79.
N.E. Singh-Miller, and N. Marzari: Phys. Rev. B - Condens. Matter Mater. Phys., 2009, vol. 80, pp. 1-9.
R. Ramprasad, P. Allmen, and L.R.C. Fonseca: Phys. Rev. B - Condens. Matter Mater. Phys., 1999, vol. 60, pp. 6023-7.
[30] G. Song, A. Atrens, and D. Suohn: Essent. Readings Magnes. Technol., 2014, vol. 9781118858, pp. 565-72.
[31] H.J. Kim, B. Kim, S.M. Baek, S.D. Sohn, H.J. Shin, H.Y. Jeong, C.D. Yim, B.S. You, H.Y. Ha, and S.S. Park: Corros. Sci., 2015, vol. 95, pp. 133-42.
[32] Q. Zhang, Q.A. Li, J. Chen, and X.Y. Zhang: Adv. Mater. Res., 2013, vol. 750-752, pp. 603-6.
[33] H. Xu, X. Zhang, K. Zhang, Y. Shi, and J. Ren: J. Rare Earths, 2016, vol. 34, pp. 315-27.
[34] Q. Peng, J. Meng, Y. Li, Y. Huang, and N. Hort: Mater. Sci. Eng. A, 2011, vol. 528, pp. 2106-9.
[35] H.Y. Ha, J.Y. Kang, C.D. Yim, J. Yang, and B.S. You: Corros. Sci., 2014, vol. 89, pp. 275-85.
[36] J.F. Moulder, J. Chastain, and R.C.J. King: Handbook of x-ray photoelectron spectroscopy: a reference book of standard spectra for identification and interpretation of XPS data, Physical Electronics, Minnesota, 2008, pp. 29-174.
[37] S.N. Mathaudhu, A.A. Luo, N.R. Neelameggham, E.A. Nyberg, and W.H. Sillekens: Essential readings in magnesium technology, Wiley-Tms, New Jersey, 2014, pp. 581-4.
[38] M. Mohedano, C. Blawert, K.A. Yasakau, R. Arrabal, E. Matykina, B. Mingo, N. Scharnagl, M.G.S. Ferreira, and M.L. Zheludkevich: Mater. Charact., 2017, vol. 128, pp. 85-99.
P.L. Chen, and I.W. Chen: J. Am. Ceram. Soc., 1996, vol. 79, pp. 1801-9.
[40] M. Grimm, A. Lohmüller, R.F. Singer, and S. Virtanen: Corros. Sci., 2019, vol. 155, pp. 195-208.
Acknowledgments
This work was supported by the Shanghai Science and Technology Committee (No. 18511109300), National Natural Science Foundation of China (No. 51601111), Science and Technology Commission of the CMC (2019JCJQZD27300).
Author information
Authors and Affiliations
Corresponding authors
Additional information
Publisher's Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Manuscript submitted November 12, 2019.
Rights and permissions
About this article
Cite this article
Zhao, P., Xie, T., Xu, X. et al. Designing High Corrosion Resistant Peritectic Magnesium Alloys via Sc and Y Addition. Metall Mater Trans A 51, 2509–2522 (2020). https://doi.org/10.1007/s11661-020-05693-5
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s11661-020-05693-5