Abstract
The phase and structural transformations of a powder hard magnetic alloy of the Fe–30% Cr–27% Co–1% Si–0.07% B system with a metastable α1 + α2 phase composition, elevated cobalt content, and high level of magnetic properties are studied. The density and variation coefficient of the concentration of main elements of sintered billets at a level of deformable analogs are attained by sintering in the α phase with contact melting in the presence of a “vanishing” liquid phase formed due to the addition of silicon and boron ferroalloys. A kinetic approach to the development of a competitive hard magnetic alloy with a high fraction of a strong magnetic phase is proposed. The influence of boron additives on the incubation period of the formation of the undesirable σ phase and the temperature range of the concentration stratification of the α solid solution into the strong magnetic α1 phase and weak magnetic α2 phase are established. Optical microscopy, X-ray phase analysis, and differential scanning calorimetry are used to determine the temperature–temporal parameters of the thermal treatment of the alloy, including quenching, thermomagnetic treatment (TMT), and final aging, which provide the required combination of Hc and Br due to an increase in stability of a metastable α phase up to 20 min in a temperature range of spinodal decomposition α → α1 + α2. The largest increase in magnetic properties after TMT observed at the first and second stages of final aging is associated with the supplementary decomposition of the α solid solution and the formation of subgrain boundaries. Elements of the formed structure have submicron and nanometer sizes that correlate with the results of studying the deformable alloys based on the Fe–Cr–Co system. The anisotropic α1 + α2 structural state attained by thermomagnetic treatment provides an increase in characteristics of magnetic properties of the studied 30Kh27KSRA powder alloy to 30% and squareness ratio of the magnetic hysteresis loop of 0.82.
Similar content being viewed by others
REFERENCES
Kaneko, H., Homma, M., and Nakamura, K., New ductile permanent magnet of Fe–Cr–Co system, AIP Conf. Proc. “Magnetism and Magnetic Materials”, 1971, no. 5, pp. 1088–1092, https://doi.org/10.1063/1.2953814.
Homma, M., Okada, M., and Horikoshi, E., Fe–Cr–Co permanent magnet alloys heat-treated in ridge region of the miscibility gap, IEEE Trans. Magn., 1981, vol. Mag.-17, no. 6, pp. 3473–3478, https://doi.org/10.1109/TMAG.1981.1061702
Zhukova, E.Kh., Malinina, R.I., Zhukov, D.G., Shubakov, V.S., and Menushenkov, V.P., Heat treatment and magnetic properties of cold-deformed alloy 30KH15K2MT, Met. Sci. Heat Treat., 2014, vol. 56, nos. 1–2, pp. 74–77. https://doi.org/10.1007/s11041-014-9706-0
Okada, M., Thomas, G., and Homma, M., Microstructure and magnetic properties of Fe–Cr–Co alloys, IEEE Trans. Magn., 1978, vol. Mag.-14, no. 4, pp. 245–252. https://doi.org/10.1109/TMAG.1978.1059752
Miller, M.K., Camus, P.P., and Hetherington, M.G., Atomic level characterization of the morphology of phases in chromindur magnetic alloys, in Magnetic Materials: Microstructure and Properties: Mater. Res. Soc. Symp. Proc., 1991, vol. 232, pp. 59–64. https://doi.org/10.1557/PROC-232-59.
Zhen Liang, Sun Xue yin, Xu Cheng yan, Gao Run sheng, Xu Ren gen, and Qin Lu chang, Magnetic anisotropy in Fe–25Cr–12Co–1Si alloy induced by external magnetic field, Trans. Nonfer. Met. Soc. China (Eng. Ed.), 2007, vol. 17, no. 2, pp. 346–350. https://doi.org/10.1016/S1003-6326(07)60096-X.
Antsiferov, V.N., Peshcherenko, S.N., and Shatsov, A.A., Diffusion homogenization of powder materials of the Fe–Ni–Cr–M system, Izv. Vyssh. Uchebn. Zaved. Chern. Metall., 1987, no. 9, pp. C. 65–68.
Fedorchenko, I.M., Frantsevich, I.N., and Radomysel’skii, I.D., Poroshkovaya metallurgiya. Materialy, tekhnologiya, svoistva, oblasti primeneniya (Powder Metallurgy. Materials, Technology, Properties, Applications), Kiev: Naukova Dumka, 1985.
Szymura, S. and Sojka, L., The effect of silicon on the structure and properties of Fe–Cr–Co permanent magnet alloys, J. Magn. Magn. Mater., 1986, no. 53, pp. 379–389. http:// doi.org/.https://doi.org/10.1016/0304-8853(86)90184-8
Sidorova, G.V., Korneev, V.P., Milyaev, I.M., Kovalenko, L.V., and Efimenko, S.P., Investigation of structural changes in the Fe–Cr–Co alloy at the initialstage of formation of a highly coercive state, Metally, 1997, no. 6, pp. C. 90–92.
Gol’dshtein, M.I., Grachev, S.V., and Veksler, Yu.G., Spetsial’nye stali (Special Steels), Moscow: MISIS, 1999.
Milyaev, I.M., Prutskov, M.E., Laisheva, N.V., Milyaev, A.I., and Yusupov, V.S., Kinetics of the σ-phase formation in Fe–Cr–Co hard magnetic alloys, Metally, 2010, no. 11, pp. 1053–1055. https://doi.org/10.1134/S0036029510110108
Bannykh, O.A., Budberg, R.B., and Alisova, S.P., Diagrammy sostoyaniya dvoinykh i mnogokomponentnykh sistem na osnove zheleza (Phase Diagrams of Binary and Multicomponent Iron-Based Systems), Moscow: Metallurgiya, 1986.
Kur’in, A.B. and Zabil’skii, V.V., Struktura, svoistva i razrushenie konstruktsionnykh stalei (Structure, Properties, and Destruction of Structural Steels), Yekaterinburg: UrO RAN, 2006.
Savitskii, A.P., Zhidkofaznoe spekanie sistem s vzaimodeistvuyushchimi komponentami (Liquid-Phase Sintering Systems with Interacting Components), Novosibirsk: Nauka, 1991.
Bobrova, S.N., Vakutin, A.P., Timokhina, A.P., and Shatsov, A.A., Sintering of iron–silicon–boron magnetically soft steels, Powder Metall. Met. Ceram., 1998, no. 37, pp. 487–494. https://doi.org/10.1007/BF02675809
Kubashevski, O., Iron-Binary Phase Diagrams, Berlin: Springer, 1982. https://doi.org/10.1007/978-3-662-08024-5.
Al’tman, A.B., Gladyshev, P.A., and Rostanaev, I.D., Technical magnetic properties of soft magnetic metal-ceramic alloys, in Elektrotekhnicheskie metallokeramicheskie izdeliya (Electrotechnical Metal-Ceramic Wares), Moscow: Informelektro, 1965, pp. 22–31.
Gorelik, S.S., Skakov, Yu.A., and Rastorguev, L.N., Rentgenograficheskii i elektronno-opticheskii analiz (X‑ray and Electron-Optical Analysis), Moscow: MISiS, 1994.
Shatsov, A.A., Powder materials of the Fe–Cr–Co system, Met. Sci. Heat Treat., 2004, no. 46, pp. 152–155. https://doi.org/10.1023/B:MSAT.0000036668.48856.02
Ushakova, O.A., Dinislamova, E.H., Gorshenkov, M.V., and Zhukov, D.G., Structure and magnetic properties of Fe–Cr–Co nanocrystalline alloys for permanent magnets, J. Alloys Compd., 2014, vol. 586, pp. 291–293. https://doi.org/10.1016/j.jallcom.2012.12.076
Sun, X.Y., Xu, C.Y., Zhen, L., Lu, L.X., and Qin, L.-C., Spinodal decomposition in Fe–25Cr–12Co–1Si alloy under a 100 kOe magnetic field, J. Magn. Magn. Mater., 2006, no. 306, pp. 69–72. https://doi.org/10.1016/j.jmmm.2006.02.107
ACKNOWLEDGMENTS
We thank Prof. A.S. Ivanov for help in performing the X-ray phase analysis.
Author information
Authors and Affiliations
Corresponding authors
Additional information
On the 85th Anniversary of the Birthday of Academician V.N. Antsiferov
Translated by N. Korovin
About this article
Cite this article
Kozvonin, V.A., Shatsov, A.A., Ryaposov, I.V. et al. Phase Transformations and Properties of Concentration-Inhomogeneous Magnetic Materials Based on the Fe–30% Cr–27% Co System. Russ. J. Non-ferrous Metals 60, 762–769 (2019). https://doi.org/10.3103/S1067821219060105
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.3103/S1067821219060105