Skip to main content
Download PDF
  • Research article
  • Open access
  • Published:

Modified high-throughput Nile red fluorescence assay for the rapid screening of oleaginous yeasts using acetic acid as carbon source

BMC Microbiology volume 20, Article number: 60 (2020) Cite this article

Abstract

Background

Over the last years oleaginous yeasts have been studied for several energetic, oleochemical, medical and pharmaceutical purposes. However, only a small number of yeasts are known and have been deeply exploited. The search for new isolates with high oleaginous capacity becomes imperative, as well as the use of alternative and ecological carbon sources for yeast growth.

Results

In the present study a high-throughput screening comprising 366 distinct yeast isolates was performed by applying an optimised protocol based on two approaches: (I) yeast cultivation on solid medium using acetic acid as carbon source, (II) neutral lipid estimation by fluorimetry using the lipophilic dye Nile red.

Conclusions

Results showed that, with the proposed methodology, the oleaginous potential of yeasts with broad taxonomic diversity and variety of growth characteristics was discriminated. Furthermore, this work clearly demonstrated the association of the oleaginous yeast character to the strain level, contrarily to the species-level linkage, as usually stated.

Background

The use of natural fats and oils for food consumption or as raw materials for biofuel production and bioenergy is creating a shortage of these materials, leading to problems associated with resource scarceness and environmental pollution. The production of single cell oils (SCOs), also called microbial lipids, could be one possible solution for these problems. Therefore, oleaginous microorganisms, the ones that are able to accumulate more than 20% of their dry cell weight as lipids in the form of droplets inside the cells [1, 2], have been the subject of increasing attention for their potential use in commercial production of oil for food, as well as for chemical and energy applications (reviewed in [3]). These SCOs include triacylglycerols (TAGs) that are the main central synthesized components inside microbial cells, but also glycolipids, phospholipids and steryl esters.

Oleaginous character is usually attributed to the microbial species-level, although some publications reported already some hints that it may vary at the strain-level. It is also known that oleaginicity can vary tremendously with the substrate and the growth conditions [4,5,6,7,8]. Yeasts stand out as the most favourable microorganisms to be used in oil production since they are simpler to handle in large-scale conditions [9], less susceptible to viral infections, and their use incorporates the ability to control bacterial contamination using lower pH values during growth [7]. Oleaginous yeasts have also several other important advantages to be considered: the ability to rapidly accumulate about 40 to 70% of lipids of their dry cellular biomass, the high growth rates and short life cycles, the presence of an enzymatic system suitable to the production and accumulation of lipids and also their capacity to tolerate and grow in a wide range of substrates [10]. Oil production using yeasts is affected by several factors, being the most relevant ones the carbon/nitrogen (C/N) ratio of substrate, the content and source of carbon, nitrogen and phosphorus, temperature, pH, growth stage, presence of alcohol and inhibitors (reviewed in [6]). When a nutrient such as nitrogen is depleted from the culture medium, a major shift in metabolism occurs, protein synthesis is depressed, and fatty acid synthesis is activated leading to its accumulation [4].

Volatile fatty acids (VFAs) are considered a promising carbon source for lipid production by oleaginous microorganisms to substitute other carbon sources, such as glucose, due to their shorter metabolic pathways and higher theoretical conversion efficiency [11]. In particular, acetic acid, a C2 compound with many applications, can be efficiently converted into lipids by oleaginous yeasts, being related to the acetyl-CoA metabolism. The creation of new fatty acids is entirely dependent on the continuous supply of acetyl-CoA, merely by the growth of oleaginous yeasts on acetic acid as carbon source [12]. After the uptake of this acid by the cells, it is converted into acetyl-CoA, being its excess used for intracellular lipid accumulation.

So far, several oleaginous yeasts have been studied, including Ascomyta (Candida, Cyberlindnera, Geotrichum, Kodamaea, Lipomyces, Magnusiomyces, Metschnikowia, Trigonopsis, Wickerhamomyces, and Yarrowia) and Basidiomycota (Cryptococcus, Geomyces, Leucosporidiella, Pseudozyma, Rhodosporidium, Rhodotorula and Trichosporon) [13,14,15], although the majority of genera and species are still to be analysed to verify oil content. One important aspect to consider is the fact that yeast taxonomy is continuously changing, so attention should be given to the species identification when considering one particular yeast species as oleaginous or not. Several conventional methods are available to quantify lipids produced by microorganisms, such as thin-layer chromatography (TLC), high-performance liquid chromatography (HPLC) and gas chromatography (GC) in combination with mass spectrometry (MS). Even though the reliability and credibility of these methodologies are high, lipid quantification usually implies high-costs and heavy equipment, and consequently screenings of large numbers of yeasts become complex and time-consuming, since lipid determination depends on several steps, including cell extraction, purification and concentration [16, 17]. Furthermore, there are three main limitations when using traditional techniques for quantifying lipids in several biological models: (1) the results are partly dependent on the cell wall disruption step; (2) the use of non-ecological and toxic organic solvents (e.g. chloroform and methanol); (3) no standardized extraction method is available to be applied to all oleaginous yeasts, since its efficiency varies greatly with the yeast species mainly due to their physiological properties. Hence, due to all these restrictions, an accurate, sensitive and rapid methodology for screening promising oleaginous strains with high capacity to accumulate lipids was needed. Several rapid screening methods have been proposed in the past, such as fluorimetric methods using Sudan black [18], Nile blue [19] and Nile red [20,21,22,23], colorimetric methods [24, 25], and, more recently the use of Fourier Transform Infrared (FTIR) spectroscopy [26, 27]. After this preliminary screening, more robust and detailed methods should be used to confirm and validate the obtained results.

Presently, the implementation of high-throughput tools for estimating the lipid content in oleaginous microorganisms have been exploited in microalgae and yeast species, yielding remarkable results [21,22,23, 28]. However, a great majority of yeast species have not yet been analyzed for lipid production and further strain selection and improvement are needed for commercial market applications. New high-throughput methods will allow to screen for a higher number of yeast isolates with suitable characteristics to utilize different substrates and different growth conditions, and to discover new oleaginous genera/species/strains that were not described so far in the literature.

In the present work we developed a protocol for the screening of oleaginous yeasts by using the Nile red fluorescence assay for measuring intracellular lipids, and introducing new key features: yeast cultivation in solid mineral medium and acetic acid as sole carbon source. A screening of around 370 yeast isolates for lipid production was accomplished in an easy, cheap and fast way, allowing the selection of new highly productive and promising yeast strains.

Results

Method validation

Eighteen yeast isolates belonging to different genera and species were randomly selected from our yeast bio-bank in order to evaluate the accuracy of published protocols and validate the methodology here proposed using acid acetic as carbon source for yeast growth on solid medium. For this, a correlation was established by comparing fluorimetric lipid detection with the traditional gravimetric determination, and the same fluorimetric quantification was used to compare lipid production by yeasts cultivated in broth and on solid media, as explained next.

Lipid accumulation inside yeast cells determined by gravimetry and fluorimetry

First, neutral lipids produced by the eighteen yeast isolates were extracted gravimetrically using n-hexane as the organic solvent, and their percentage (w/w) was determined by weight difference. Table 1 summarizes the results obtained, expressed as “Lipid content (% (w/w))”, corresponding to an average value of three replicates and respective standard deviations. Data shows that about 72% of the yeasts (13 out of 18) were considered as oleaginous, and 28% (5 out of 18) were categorised as non-oleaginous, following the Ratledge [1] definition of oleaginous organisms as being the ones capable of accumulate more than 20% (w/w) of lipids, on dry cell basis. The highest values (≅ 60% (w/w)) were obtained for isolates V134 (Apiotrichum brassicae) and V194 (Pichia kudriavzevii). In this experiment two yeast species were included as being well known in the literature as either oleaginous (Yarrowia lipolytica - V011) or non-oleaginous (Saccharomyces cerevisiae – V673). Results here obtained are not in accordance with the literature, since the yeast Y. lipolytica V011 did not show high ability to accumulate intracellular lipids (11.9 ± 0.9% (w/w)), while S. cerevisiae isolate V673 obtained higher values (26.0 ± 3.6% (w/w)) than the ones achieved by Y. lipolytica and higher than the ones usually reported in literature [29], thus showing some oily capacity. However, the carbon source here used for yeast growth – acetic acid – is different than the one used commonly – glucose –, which could justify the differences found. This fact stresses that the oleaginous character of a strain should be attributed in close association with the carbon source in which the growth occurred.

Table 1 Relative fluorescence units (RFUs) determined by Nile red fluorimetric assay, and lipid content (% (w/w)) determined by gravimetric method after solvent extraction with n-hexane
Full size table

In a second phase, and following Sitepu et al. [23] method, a Nile red fluorimetric assay was applied for yeast cultivated in broth and solid MAc media, being emitted fluorescence measured in the form of relative fluorescence units (RFUs) after 120 h of cell growth. Results are presented in Table 1, expressed as “RFUs (broth medium)” and “RFUs (solid medium)”. As expected, the capacity to accumulate lipids as determined by fluorimetry was not equal in all yeasts, and showed high variation among species, ranging from 9.3 ± 1.4 to 85.1 ± 0.2 RFUs when yeasts were grown in broth medium, and from 6.7 ± 1.3 to 138.0 ± 18.3 when solid medium was used. Considering these results, particular attention should be given again to isolates V134 (A. brassicae) and V194 (P. kudriavzevii), due to the highest RFUs obtained, in the same way as was observed using gravimetric method, especially when considering growth on solid medium for which the maximum RFUs values were 138 and 132, respectively. Other isolates also showed good capacity to accumulate lipids when grown in MAc - V102 (P. fermentans) and V213 (Metschnikowia pulcherrima) -, revealed by the obtainment of RFUs higher than 30 in both forms of cultivation. Again, Y. lipolytica V011 isolate had consistently low lipid production (RFUs: 9.9 ± 1.7 or 10.3 ± 1.7 considering broth and solid media, respectively) and in contrast, the yeast S. cerevisiae V673 showed some trend to accumulate lipids (RFUs: 22.4 ± 1.9 or 18.7 ± 2.7 considering broth and solid media, respectively) as detected by fluorimetric analysis. Once again, this difference seems to be related with the growth conditions that are known to deeply influence the lipid production more than the yeast species itself, as already shown before for Y. lipolytica [30].

Correlation between gravimetric and Nile red fluorimetric methods

To validate the use of the proposed method, considering yeast growth on solid MAc medium and lipids quantified using Nile red fluorimetric approach, a correlation between experiments had to be performed, comparing lipid determination using both gravimetric and fluorimetric methods, after yeast growth in broth medium. For this, we assessed if the results obtained by the Nile red fluorimetric method were correlated with lipid quantification using the traditional gravimetric method after solvent extraction, considering the subgroup of 18 yeast isolates. Figure 1 presents the correlation obtained between methods, showing a very high correlation factor (R2 = 0.924), indicating the reliability of lipid estimation using Nile red fluorimetry for yeasts belonging to different species and genera, and with distinct ability to accumulate intracellular lipids. Using the equation present in Fig. 1 (y = 1.583 x – 14.916) it is possible to establish a correlation between the RFU values read in the fluorimeter and the % of lipids (w/w) determined by the gravimetric method. Considering the value proposed by Ratledge [1] – 20% of lipids accumulated – in order to consider a yeast as oleaginous, using the mentioned equation we determined that the corresponding value in terms of RFUs was around 16.

Fig. 1
figure 1

Correlation between fluorimetric and gravimetric method for 18 distinct yeasts cultivated in broth mineral medium with HAc 15 g/L, at pH 5.5 (R2 = 0.924). Data are mean ± standard deviation of three replicates

Full size image

Correlation between lipid production obtained after yeast growth on solid versus broth media

After validation of the fluorimetric procedure for the estimation of lipid accumulation in yeasts (Fig. 1), the subsequent step was the evaluation of the possibility to cultivate yeasts on solid medium. Thus, yeasts were grown in two different conditions, using Petri dishes for solid medium and shake flasks for broth medium cultivation, using in both cases MAc medium. Lipid accumulation ability was estimated by fluorimetry (Table 1 and Fig. 2), and statistical analysis (one-way analysis of variance) displayed no statistical differences (p < 0.05; data not shown) between RFUs means of both experiments (broth and solid media) which points to the validity of using solid medium to perform yeast screening for lipid accumulation. In order to extent this analysis, a linear regression was established (Fig. 2), modulating the relationship between the two variables. Results showed the existence of a strong correlation (R2 = 0.864), meaning that cultivation of yeasts on solid medium doesn’t affect the determination of their lipid content.

Fig. 2
figure 2

Correlation between relative fluorescence units (RFUs) for intracellular lipids obtained with yeasts cultivated in solid and broth media, composed of mineral medium with HAc 15 g/L as carbon source, at pH 5.5 (R2 = 0.864). Data are mean ± standard deviation of three replicates

Full size image

High-throughput screening of yeast isolates for lipid production: evaluation of yeast oleaginous character

After validation of the procedure, it was used for the screening of our 366 isolates. Using solid medium cultivation and Nile red fluorescence lipid determination we screened the yeasts for their capacity to produce SCOs. After 120 h, the lipid production was estimated by the Nile red fluorescence method in a 96-well dark microplate, and kinetic readings were performed during 20 min, being the maximum values of RFUs for each isolate determined after this time. This type of kinetic analysis accounts for individual variability since each yeast species presents its maximum fluorescence emission at a different time after Nile red incubation. With the single analysis performed at the same time for all the isolates, as was being performed before the protocol development by Sitepu et al. [23], maximum production capacity of strains evaluated during screenings would be overlooked. A total of 366 yeast strains was tested, from widely different environments, belonging to 54 genera and to 106 distinct species, both from Ascomycota and Basidiomycota phyla. In fact, for numerous yeast species, the information about their lipid production ability was still unknown.

Figure 3 summarizes the results obtained after the screening of all isolates using our proposed method. From the total 366 yeasts included in the screening, only 276 isolates were able to grow in HAc 15 g/L as carbon source, since for the other 90 isolates, no yeast colonies were detected on the Petri dishes, and therefore it was impossible to perform the fluorimetric assay. This fact is associated with the lack of capacity of these isolates to assimilate acetic acid as carbon source, especially in this concentration, as already referred by other authors [30,31,32]. Nevertheless, this carbon source seems to be the most appropriate to evaluate yeast oleaginicity potential [29, 31,32,33,34]. According to Fig. 3, it was possible to distribute isolates according to their lipid-accumulating ability. The highest number of isolates (214) were grouped as having RFUs below 16 (corresponding to less than 20% of lipids (w/w) when considering the equation of Fig. 1), indicative of their non-oleaginous character. This group, comprising 77% of the tested yeasts was not considered as good candidates to be used industrially and, therefore, it wasn’t exploited further in this work. Yeasts considered to have promising potential to produce lipids were grouped as having RFUs between 16 and 31 (43 isolates corresponding to 16% of the tested yeasts). These isolates show some capacity to produce lipids but not in quantities that lead to their use in industry. However, this should be the group of isolates to be tested in future works, for example varying the carbon sources of testing media and using different C/N ratios. The third and most important group in the context of this screening is the one containing isolates that obtained RFUs higher than 31 (corresponding to more than 30% of lipids (w/w) when considering the equation of Fig. 1), composed by yeasts considered to be highly oleaginous. This group (Table 2) is composed by 19 isolates, corresponding to 7% of the tested yeasts, achieving RFUs between 31 and 138. As one can conclude by the analysis of Table 2, the capacity of accumulating lipids was different and quite high for these oleaginous yeast species, with four isolates being capable to obtain RFUs values higher than 60. Isolates V134 and V194, belonging to species A. brassicae and P. kudriavzevii, respectively, were the two best promising oleaginous yeasts found in this screening, with quantified RFUs higher than 130. These two species are phylogenetically different, but behave identically regarding their oily capacity since their lipid contents were almost equal in the gravimetric analysis (≅ 60% (w/w), Table 1). Regarding yeast A. brassicae, also designated Trichosporon brassicae, its oleaginous capacity was already identified by Franklin et al. [35], who recorded a lipid content of 20.3% (w/w) for this yeast species. In comparison with the almost 60% (w/w) of lipids achieved in the optimisation experiment (Table 1), and 138 RFUs estimated for this yeast in the screening (Table 2), this may be the first study reporting the highest lipid content value for this species. In the case of yeast P. kudriavzevii V194, some studies have already stated high lipid contents for this ascomycete species as observed in this screening, which corroborates the oleaginicity often attributed to the genus Pichia [36, 37]. Within this genus, it was possible, for the first time to categorise two other yeast species as oleaginous, such as P. fermentans and P. exigua (Table 2), due to the inexistence of information in the literature about the oleaginous character of these two species.

Fig. 3
figure 3

Yeast lipid synthesis ability, in terms of relative fluorescence units (RFUs), of 276 screened yeasts, as being able to grow in mineral medium with HAc 15 g/L, at pH 5.5. The first number inside the chart indicates the absolute number of isolates, and the second one the total percentage

Full size image
Table 2 Relative fluorescence units (RFUs) of the 19 yeast species considered as being highly oleaginous (more than 30% (w/w) of their DCW in lipids) after the screening using the proposed innovative methoda
Full size table

Intraspecific variability of oleaginous character within yeasts: should oleaginous character be credited at strain level?

Besides distinct species, the present screening also included several yeast isolates of the same species in order to ascertain whether lipid accumulation may be strain dependent. Some examples of different yeast isolates belonging to the same species are described in Table 3 together with the respective RFUs obtained in the screening. For some species, considerable variations in lipid accumulation ability were observed, being possible to detect differences in the oleaginous potential at strain level, instead of species level as usually reported in the literature. For example, for C. tropicalis, the lipid accumulation capacity ranged from 2 to 78 RFUs, having the isolate V311 the highest (RFUs = 78) and the isolate V286 (RFUs = 2) the lowest lipid accumulation capacity. In the case of G. candidum species, it was possible to observe opposite capacities to accumulate lipids in the four isolates tested, as the yeast V342 (RFUs = 35) was considered oleaginous, the yeast V315 (RFUs = 28) was categorised as moderately oleaginous and the yeasts V395 and V249 (RFUs = 9; RFUs =1) were considered non-oleaginous. Considering M. pulcherrima and P. fermentans, the differences in oily capacity from distinct yeast strains were also observed, as the RFU values varied from 5 to 42 for the first species and 2 to 41 for the last one, respectively. No influence was found from the source of each strain isolation in the attribution of the oleaginous character (data not shown).

Table 3 Relative fluorescence units (RFUs) obtained by different isolates of the same yeast speciesa
Full size table

Discussion

In the first part of this work, a protocol for the detection and estimation of lipids produced by yeasts was optimized. Using a group of eighteen distinct yeast isolates grown in a medium containing acetic acid as carbon source, it was possible to obtain a valid correlation between Nile red fluorimetric assay and the traditional gravimetric extraction method, which allowed to consider the fluorimetry as a suitable, accurate and reliable method to estimate the intracellular lipid production among several yeasts of distinct species and genera. The establishment of this correlation allowed the estimation of yeast lipid content by using only the fluorimetry approach, thus avoiding the tedious and time-consuming process associated with the gravimetric extraction. This correlation was also obtained before by other authors [21, 23, 38, 39], although either with a much smaller correlation factor than the one obtained in this work, or with a similar correlation factor but considering a lower number of isolates. Results show that strains with higher fluorescence also have higher lipid content, and vice versa, indicating that it is possible to predict the lipid content of each yeast by using only the fluorimetric approach also when using acetic acid as sole carbon source for yeast growth.

With the aim of validating the solid medium cultivation to grow yeasts in a high-throughput screening comprising several yeast isolates, a correlation was obtained between RFUs means of two different experiments: yeasts cultivated in shake flasks and cultivation in solid medium, using in both cases MAc medium. This is, to the extent of our knowledge, the first validation of this method using cultivation of yeasts on solid medium with the objective to screen for their SCOs accumulation properties, conjugating with a previously optimized procedure for the fluorescence quantification of lipid production. Some of the main advantages of this protocol are related to the fact that: (i) it is rapid, since it does not require the cell harvesting and washing step as in the fluorimetric analysis performed in broth medium; (ii) it requires less incubation space associated to the use of Petri dishes, in comparison with the shake flasks; (iii) it is less expensive, since the overall costs for solid medium cultivation are cheaper than for broth cultivation; (iv) it is less energy-demanding because it does not need a rotary shaker for incubation or a centrifugation step; (v) it is high-throughput, so that at least four to eight yeasts can be cultivated in a Petri dish, instead of single yeast cultivations in shake flask. This innovative procedure allows the high-throughput screening of a large number of isolates in a shorter amount of time and in a much easier way than using traditional methods.

After validation of the proposed method, it was used for the screening of the 366 yeast isolates. Our results discriminated 17 Ascomycetous species as high lipid producers, although the higher producer – A. brassicae – belongs to Basidiomycota phylum. Over the years, several yeast species were associated with oleaginous character, being this number higher than 40 already in 2012 [40] and continuing to grow during the last 10 years. In 2016, one report stated that already 70 species are identified as oleaginous [41]. These oleaginous yeasts are both from Ascomycota phylum (Candida, Cyberlindnera, Geotrichum, Kodamaea, Lipomyces, Magnusiomyces, Metschnikowia, Trigonopsis, Wickerhamomyces, and Yarrowia) and from Basidiomycota phylum (Cryptococcus, Geomyces, Leucosporidiella, Pseudozyma, Rhodosporidium, Rhodotorula and Trichosporon). Wang et al. [15] stated, using genome sequencing, that lipogenic capacity was acquired by fungi only after the divergence of Ascomycota, Basidiomycota, Chytridiomycota and Mucoromycota clades. In this way, no clear conclusion can be made about the comparison of lipid production between the two phyla. One aspect of notable importance is the fact that Basidiomycete yeast species are able to utilize a broader array of carbon sources than Ascomycete yeast species [42], and in this way the finding of good oleaginous candidates belonging to this phylum makes them perfect candidates to be used in industrial production, and in environmental projects using a wide array of substrates to produce lipids.

Even though a high oleaginous capacity was detected for the yeast Hyphopichia burtonii (V447) in the screening (RFU = 51), the cultivation of this yeast in solid MAc resulted in the formation of several hyphae invading the agar, thus increasing the complexity to collect cells and analyse their lipid accumulation. This species was already described as oleaginous in a previous report [35], although with no described information about its lipid content. Likewise, this screening also provided data about the oleaginous character of M. farinosa, T. cantarelli and G. candidum for the first time. Even though Ratledgle [43] has considered the yeast G. candidum as oleaginous, no data are available about its lipid content, making this screening the first study providing detailed information about oleaginicity capacity of this species. On the other hand, some of the yeast species reported as oleaginous in the literature were also found in this group: A. brassicae, P. kudriavzevii, C. tropicalis, M. pulcherrima, C. palmioleophila and R. mucilaginosa [8, 36, 44, 45].

Another surprising result was related to the fact that this screening did not categorise any Y. lipolytica isolate as oleaginous, even though this species is currently recognised as a model microorganism for lipid production [46]. Considering the five yeast strains tested, the obtained RFU varied from 4.6 to 11.4, indicating that none of the tested strains of Y. lipolytica was able to accumulate significant quantities of lipids, and therefore they were considered as non-oleaginous. Indeed, this allowed to demonstrate that the cited lipid content represents only one reported value for this particular species, and for instance when other strains of Y. lipolytica are cultivated under distinct conditions, they may present higher or lower lipid contents, as already shown [5, 7]. Moreover, during the growth of these five yeast strains, the production of several hyphae in the solid MAc was observed. This is actually a typical behaviour of this dimorphic yeast cultivated under nitrogen-limited conditions, and is often associated with a defence mechanism to some adverse conditions [47]. Actually, although Y. lipolytica has been referred as oleaginous, there are no reports of high lipid accumulation. This species has been widely used as a classic species because its genome has been sequenced early, which allowed its engineering towards an higher lipid accumulation [3, 30, 41, 48]. Nowadays, many yeast genomes are available, so other yeast species can be used in this kind of studies.

Results clearly show that lipid accumulation varies among strains of the same species, therefore yeast oleaginous potential should be attributed at the strain level, instead of species-level linkage as usually stated in the literature. This idea was already reported in other studies [4, 5, 7, 48]. For example, in the study carried out by Garay et al. [41], two different strains of R. mucilaginosa were tested and their lipid contents varied from 20 to 45% of lipids. Sitepu et al. [23] included four independent isolates of Rhodosporidium diobovatum, which presented lipid contents varying from 21 to 41% (w/w). Likewise, Katre et al. [5] reported lipid contents in a range from 22 to 31% (w/w) for five isolates of Y. lipolytica tested. Even though several examples have been reported during the last years, it is still standard practice to describe yeast species as oleaginous or non-oleaginous, directing to the (erroneous) fact that all strains of that species should have the same behaviour.

Conclusions

The easy, cheap and fast protocol here optimised was based on using solid medium cultivation and subsequent neutral lipid estimation by fluorimetric method, instead of broth medium and traditional gravimetric method determination. This high-throughput protocol proved to be adequate for the screening of large number of yeasts as a preliminary step for the selection of new candidates to be used at industrial level.

Our work discriminated the oleaginous potential of yeasts with broad taxonomic diversity and variety of growth characteristics. We highlighted strains of the species Apiotrichum brassicae and Pichia kudriavzevii as good candidates to accumulate lipids using acetic acid as carbon source.

Methods

Yeast isolates and culture conditions

Three hundred and sixty-six yeast natural isolates were used in this study. They were isolated from different environmental sources, such as fruit and vegetable wastes, fermented beverages, soils, etc. (Supplementary Data S1), in the ambit of several research projects previously developed, identified, and stored in our research center. From this group, 18 isolates were randomly chosen and used to validate a new screening protocol. To confirm the species identification of the yeasts (the ones chosen randomly to validate the protocol – Table 1 –, and the ones catalogued as oleaginous after the screening – Table 2), the internal transcribed spacer (ITS) region was sequenced and DNA sequences were deposited in NCBI GenBank database under the Accession Numbers depicted in Supplementary Data S2. To each isolate, a code composed of “V” plus three digits was attributed, as detailed in Table 1. All yeasts were stored at − 80 °C in cryo-tubes with 1 mL glycerol (30% v/v).

Prior to all experiments, yeasts were revived from cryo-preserved stocks, collecting a portion of cell biomass to Yeast Extract Peptone Dextrose (YPD) medium (1% yeast extract (w/v), 2% peptone (w/v), 2% dextrose (w/ v)), supplemented with agar 2% (w/v), and incubated at 30 °C.

For quantification of yeast lipid accumulation, a mineral medium with acetic acid was used (MAc: acetic acid 15 g/L, yeast extract 0.75 g/L, MgSO4.7H2O 1.5 g/L, KH2PO4 0.4 g/L, (NH4)2SO4 0.1 g/L, pH 5.5), previously shown to be adequate to the production of SCOs by yeasts [31]. Acetic acid was microfiltered to avoid heat-induced volatilization and added to autoclaved medium. When experiments were to be performed on solid medium, 2% (w/v) agar was added to the MAc medium.

Yeasts were pre-cultured in YPD medium and incubated during 24 h (170 rpm, 30 °C). After this period, cultures were harvested by centrifugation, washed once in MAc medium, and optical density (OD) was measured at 640 nm and adjusted to 0.6. For lipid accumulation analysis regarding yeasts cultivated in broth medium, yeasts were incubated in 40 mL MAc medium in 100 mL Erlenmeyer flasks on a rotary shaker at 170 rpm, 30 °C, pH 5.5, for 120 h. For solid medium cultivations, yeast cells were pipetted to a Petri dish with MAc medium, and plates were incubated at 30 °C, pH 5.5, for 120 h. For both cultivations, three replicates were performed to ensure the reproducibility and reliability of the results.

Lipid quantification

Experimental setup

To estimate the lipid accumulation ability of yeasts, the protocol described by Sitepu et al [23] was used with the following modifications: i) acetic acid as carbon source; ii) yeast cultivation on solid medium. In order to validate the use of this method to determine lipid quantities produced by yeasts, the existence of a correlation between fluorimetric and gravimetric methods, as well as the comparison of the cultivation of yeasts in solid or broth media was tested, using MAc medium. After 120 h of cultivation in broth medium, yeast biomass was determined and lipids were quantified by gravimetry and fluorimetry. For yeasts growing on solid medium, lipid synthesis ability was determined only by fluorimetry.

Dry cell weight and gravimetric determination of lipid content

Dry cell weight was determined by transferring 40 mL of yeast cultures to 50 mL conical tubes, centrifuging (5000 rpm, 2 min) and washing with sterile deionised water, until removal of all the growth medium. Cell pellets were transferred to a previously weighed 2 mL microtube, frozen in liquid nitrogen and stored overnight at − 80 °C. Following, cells were freeze-dried (Alpha 2–4 LD plus, BIOBLOCK scientific, CHRIST®) for 48 h, 0.010 mbar at − 83 °C, and lyophilised cells were maintained in the desiccator until gravimetric analysis. Yeast dry cell weight was determined by weight difference after lyophilisation and expressed in terms of g biomass/L culture.

For the gravimetric determination of lipid content approximately 20 mg of lyophilised cells were weighed to 2 mL screw cap tubes with 800 mg of glass beads (diameter 0.25–0.50 mm, RETSCH®). Cells were homogenised in different series using a FastPrep®FP120 Cell disrupter for 30 s, 8 times, speed 6.5 m/s with 60 s interval on ice. A total of 3 mL of n-hexane (99.0% of purity, PANREAC®) were used to extract lipids and 0.6 mL 0.9% NaCl was added to 15 mL glass tubes to solubilize cellular compounds, being the solution then mixed in a vortex for 40 s and centrifuged at 3018 rpm (1020 g) for 3 min. After centrifugation, the superior phase was filtered to a 4 mL pre-weighed amber vial and evaporated under a low stream of nitrogen. Vials were dried at 50 °C for 1 h, and weighted. The lipid content was determined by dividing the difference of the vial weight by the mass of lyophilised cells previously weighed for each screw cap tube, and expressed in terms of gram of lipid per gram of DCW (% (w/w)). The efficacy of each extraction was evaluated and corrected by using commercial oil as a standard control.

Lipid content estimation using Nile red fluorimetric assay

Regarding the fluorimetric assay, the procedure for yeast grown in broth and on solid media was similar, being cells washed and final OD640 adjusted to 1.0 using PBS 1x, since it represents the adequate cell density to obtain optimum fluorescence measurement [23]. Then, a volume of 817 μL of cells were mixed with 83 μL DMSO:PBS 1x (1:1 (v/v)) in 1.5 mL microtubes, and 5 μg of Nile red (Sigma-Aldrich®) diluted in acetone were added to the mixture. In a dark environment, 200 μL of the suspension were transferred, in triplicate, to 96-well black microplates (Corning®, Cat.#3915), being the fluorescence intensity instantly read in a microplate fluorimeter (Fluoroskan Ascent FL, Thermo Scientific®), with the following parameters, adapted from [23]: initial fluorescence excitation at 530 nm and emission at 590 nm, kinetic readings for 20 min with 60 s interval and 30 s of shaking. Independent control samples were prepared consisting of Nile red diluted in acetone, PBS 1x and DMSO:PBS 1x (1:1 (v/v)). Blank samples were prepared by substituting the cell suspension by the same volume of PBS 1x. Cells auto fluorescence was also measured substituting Nile red solution by pure acetone. In addition, biological control samples (yeast suspensions whose lipid concentration was previously determined) were also prepared and included in each microplate to evaluate consistency between readings. After kinetic readings, maximal emission values were determined and fluorescence data were corrected for variation in cell density by dividing the RFUs by background OD640 values and then by subtracting the mean of blank values.

High-throughput screening of lipid producing yeasts

After a strong correlation was obtained between Nile red fluorescence method using solid and broth media, the former one was used in a high-throughput screening of a total of 366 yeast strains, in order to evaluate SCOs production, using solid MAc media, and the conditions described previously (“Experimental setup”).

Data analysis

All values are means of three independent biological experiments. Statistical analyses were performed using Data Analysis Pack in Excel®. RFUs means were compared between broth and solid media, and also with the mean percentage of lipids determined by gravimetric analysis and evaluated using one-way analysis of variance (ANOVA).

Availability of data and materials

The datasets used and/or analysed during the current study are available from the corresponding author on reasonable request.

Abbreviations

C/N:

Carbon/nitrogen

DCW:

Dry Cell Weight

FTIR:

Fourier Transform Infrared

GC:

Gas chromatography

HAc:

Acetic acid

HPLC:

High-performance liquid chromatography

MS:

Mass spectrometry

RFUs:

Relative Fluorescence Units

SCOs:

Single cell oils

TAGs:

Triacylglycerols

TLC:

Thin layer chromatography

VFAs:

Volatile fatty acids

References

  1. Ratledge C. Fatty acid biosynthesis in microorganisms being used for single cell oil production. Biochimie. 2004;86:807–15.

    Article  CAS  PubMed  Google Scholar 

  2. Thorpe R, Ratledge C. Fatty acid distribution in triglycerides of yeasts grown on glucose or n-alkanes. J Gen Microbiol. 1972;72:151–63.

    Article  CAS  Google Scholar 

  3. Carsanba E, Papanikolaou S, Erten H. Production of oils and fats by oleaginous microorganisms with an emphasis given to the potential of the nonconventional yeast Yarrowia lipolytica. Crit Rev Biotechnol. 2018;0:1–14.

    Google Scholar 

  4. Meng X, Yang J, Xu X, Zhang L, Nie Q, Xian M. Biodiesel production from oleaginous microorganisms. Renew Energy. 2009;34:1–5.

    Article  CAS  Google Scholar 

  5. Katre GG, Joshi CC, Khot MM, Zinjarde SS, RaviKumar AA. Evaluation of single cell oil (SCO) from a tropical marine yeast Yarrowia lipolytica NCIM 3589 as a potential feedstock for biodiesel. AMB Express. 2012;2:36.

    Article  PubMed  PubMed Central  CAS  Google Scholar 

  6. Chaturvedi S, Bhattacharya A, Khare SK. Trends in oil production from oleaginous yeast using biomass: biotechnological potential and constraints. Appl Biochem Microbiol. 2018;54:361–9.

    Article  CAS  Google Scholar 

  7. Sitepu IR, Garay LA, Sestric R, Levin D, Block DE, German JB, et al. Oleaginous yeasts for biodiesel: current and future trends in biology and production. Biotechnol Adv. 2014;32(7):1336–60.

    Article  CAS  PubMed  Google Scholar 

  8. Li M, Liu GL, Chi Z, Chi ZM. Single cell oil production from hydrolysate of cassava starch by marine-derived yeast Rhodotorula mucilaginosa TJY15a. Biomass Bioenergy. 2010;34:101–7.

    Article  CAS  Google Scholar 

  9. Papanikolaou S, Seraphim P, Papanikolaou S. Oleaginous yeasts: biochemical events related with lipid synthesis and potential biotechnological applications. Ferment Technol. 2012;01:1–3.

    Article  Google Scholar 

  10. Xu X, Kim JY, Cho HU, Park HR, Park JM. Bioconversion of volatile fatty acids from macroalgae fermentation into microbial lipids by oleaginous yeast; 2015.

    Book  Google Scholar 

  11. Liu J, Liu J-N, Yuan M, Shen Z-H, Peng K-M, Lu L-J, et al. Bioconversion of volatile fatty acids derived from waste activated sludge into lipids by Cryptococcus curvatus. Bioresour Technol. 2016;211:548–55.

    Article  CAS  PubMed  Google Scholar 

  12. Xu J, Du W, Zhao X, Zhang G, Liu D. Microbial oil production from various carbon sources and its use for biodiesel preparation. Biofuels Bioprod Biorefin. 2013;7:65–77.

    Article  CAS  Google Scholar 

  13. Ageitos JM, Vallejo JA, Veiga-Crespo P, Villa TG. Oily yeasts as oleaginous cell factories. Appl Microbiol Biotechnol. 2011;90:1219–27.

    Article  CAS  PubMed  Google Scholar 

  14. Rossi M, Buzzini P, Cordisco L, Amaretti A, Sala M, Raimondi S, et al. Growth, lipid accumulation, and fatty acid composition in obligate psychrophilic, facultative psychrophilic, and mesophilic yeasts. FEMS Microbiol Ecol. 2009;69:363–72.

    Article  CAS  PubMed  Google Scholar 

  15. Wang L, Chen W, Feng Y, Ren Y, Gu Z, Chen H, et al. Genome characterization of the oleaginous fungus Mortierella alpina. PLoS One. 2011;6(12):e28319.

    Article  CAS  PubMed  PubMed Central  Google Scholar 

  16. Bligh E, Dyer W. A rapid method of total lipid extraction and purification. Can J Biochem Physiol. 1959;37:911–7.

    Article  CAS  PubMed  Google Scholar 

  17. Rumin J, Bonnefond H, Saint-Jean B, Rouxel C, Sciandra A, Bernard O, et al. The use of fluorescent Nile red and BODIPY for lipid measurement in microalgae. Biotechnol Biofuels. 2015;8:42.

    Article  PubMed  PubMed Central  CAS  Google Scholar 

  18. Evans CT, Ratledge C, Gilbert SC. A rapid screening method for lipid-accumulating yeast using a replica-printing technique. J Microbiol Methods. 1985;4:203–10.

    Article  CAS  Google Scholar 

  19. Greenspan P, Mayer EP, Fowler SD. Nile red: a selective fluorescent stain for intracellular lipid droplets. J Cell Biol. 1985;100:965–73.

    Article  CAS  PubMed  Google Scholar 

  20. Cole TA, Fok AK, Ueno MS, Allen RD. Use of Nile red as a rapid measure of lipid content in ciliates. Eur J Protistol. 1990;25:361–8.

    Article  CAS  PubMed  Google Scholar 

  21. Kimura K, Yamaoka M, Kamisaka Y. Rapid estimation of lipids in oleaginous fungi and yeasts using Nile red fluorescence. J Microbiol Methods. 2004;56:331–8.

    Article  CAS  PubMed  Google Scholar 

  22. Huang GH, Chen G, Chen F. Rapid screening method for lipid production in alga based on Nile red fluorescence. Biomass Bioenergy. 2009;33:1386–92.

    Article  CAS  Google Scholar 

  23. Sitepu I, Ignatia L, Frank A, Wong D, Faulina S, Tsui M, et al. An improved high-throughput Nile red fluorescence assay for estimating intracellular lipids in a variety of yeast species. J Microbiol Methods. 2012;91:321–8.

    Article  CAS  PubMed  PubMed Central  Google Scholar 

  24. Cheng YS, Zheng Y, VanderGheynst JS. Rapid quantitative analysis of lipids using a colorimetric method in a microplate format. Lipids. 2011;46:95–103.

    Article  CAS  PubMed  Google Scholar 

  25. Wawrik B, Harriman BH. Rapid, colorimetric quantification of lipid from algal cultures. J Microbiol Methods. 2010;80:262–6.

    Article  CAS  PubMed  Google Scholar 

  26. Dean AP, Sigee DC, Estrada B, Pittman JK. Using FTIR spectroscopy for rapid determination of lipid accumulation in response to nitrogen limitation in freshwater microalgae. Bioresour Technol. 2010;101:4499–507.

    Article  CAS  PubMed  Google Scholar 

  27. Ami D, Posteri R, Mereghetti P, Porro D, Doglia SM, Branduardi P. Fourier transform infrared spectroscopy as a method to study lipid accumulation in oleaginous yeasts. Biotechnol Biofuels. 2014;7:12.

    Article  PubMed  PubMed Central  CAS  Google Scholar 

  28. Rostron KA, Rolph CE, Lawrence CL. Nile red fluorescence screening facilitating neutral lipid phenotype determination in budding yeast, Saccharomyces cerevisiae, and the fission yeast Schizosaccharomyces pombe. Antonie van Leeuwenhoek, Int. 2015;108:97–106.

    Article  CAS  Google Scholar 

  29. Kolouchová I, Schreiberová O, Sigler K, Masák J, Řezanka T. Biotransformation of volatile fatty acids by oleaginous and non-oleaginous yeast species. FEMS Yeast Res. 2015;15:fov076.

    Article  PubMed  CAS  Google Scholar 

  30. Gao R, Li Z, Zhou X, Cheng S, Zheng L. Oleaginous yeast Yarrowia lipolytica culture with synthetic and food waste-derived volatile fatty acids for lipid production. Biotechnol Biofuels. 2017;10:247.

    Article  PubMed  PubMed Central  CAS  Google Scholar 

  31. Huang X-FF, Liu J-NN LL-JJ, Peng K-MM, Yang G-XX, Liu J-NN. Culture strategies for lipid production using acetic acid as sole carbon source by Rhodosporidium toruloides. Bioresour Technol. 2016;206:141–9.

    Article  CAS  PubMed  Google Scholar 

  32. Fontanille P, Kumar V, Christophe G, Nouaille R, Larroche C. Bioconversion of volatile fatty acids into lipids by the oleaginous yeast Yarrowia lipolytica. Bioresour Technol. 2012;114:443–9.

    Article  CAS  PubMed  Google Scholar 

  33. Fei Q, Chang HN, Shang L. Choi J dal rae, Kim N, Kang J. the effect of volatile fatty acids as a sole carbon source on lipid accumulation by Cryptococcus albidus for biodiesel production. Bioresour Technol. 2011;102:2695–701.

    Article  CAS  PubMed  Google Scholar 

  34. Gong Z, Shen H, Zhou W, Wang Y, Yang X, Zhao ZK. Efficient conversion of acetate into lipids by the oleaginous yeast Cryptococcus curvatus. Biotechnol Biofuels. 2015;8:189.

    Article  PubMed  PubMed Central  CAS  Google Scholar 

  35. Franklin S, Decker S, Wee J. United States patent: Fuel and chemical production from oleaginous yeast; 2011.

    Google Scholar 

  36. Diwan B, Gupta P. Comprehending the influence of critical cultivation parameters on the oleaginous behaviour of potent rotten fruit yeast isolates. J Appl Microbiol. 2018;125:490–505.

    Article  CAS  PubMed  Google Scholar 

  37. Sankh S, Thiru M, Saran S, Rangaswamy V. Biodiesel production from a newly isolated Pichia kudriavzevii strain. Fuel. 2013;106:690–6.

    Article  CAS  Google Scholar 

  38. Poli JS, Lützhøft HCH, Karakashev DB, Valente P, Angelidaki I. An environmentally-friendly fluorescent method for quantification of lipid contents in yeast. Bioresour Technol. 2014;151:388–91.

    Article  CAS  PubMed  Google Scholar 

  39. Ramírez-Castrillón M, Jaramillo-Garcia VP, Rosa PD, Landell MF, Vu D, Fabricio MF, et al. The oleaginous yeast Meyerozyma guilliermondii BI281A as a new potential biodiesel feedstock: Selection and lipid production optimization. Front Microbiol. 2017;8:1776.

    Article  PubMed  PubMed Central  Google Scholar 

  40. Sitepu I, Sestric R, Ignatia L, Levin D, German J, Gillies L, et al. Manipulation of culture conditions alters lipid content and fatty acid profiles of a wide variety of known and new oleaginous yeasts species. Bioresour Technol. 2013;6:790–5.

    Google Scholar 

  41. Garay LA, Sitepu IR, Cajka T, Chandra I, Shi S, Lin T, et al. Eighteen new oleaginous yeast species. J Ind Microbiol Biotechnol. 2016;43:887–900.

    Article  CAS  PubMed  Google Scholar 

  42. Kurtzman C, Fell JW, Boekhout T. The yeasts: a taxonomic study: Elsevier; 2011.

  43. Ratledge C. Biotechnology of oils and fats. Microb lipids. 1989;2:567–668.

    CAS  Google Scholar 

  44. Santamauro F, Whiffin FM, Scott RJ, Chuck CJ. Low-cost lipid production by an oleaginous yeast cultured in non-sterile conditions using model waste resources. Biotechnol Biofuels. 2014;7:1–11.

    Article  CAS  Google Scholar 

  45. Gujjari P, Suh S-O, Coumes K, Zhou JJ. Characterization of oleaginous yeasts revealed two novel species: Trichosporon cacaoliposimilis sp nov and Trichosporon oleaginosus sp nov. Mycologia. 2011;103:1110–8.

    Article  PubMed  Google Scholar 

  46. Beopoulos A, Cescut J, Haddouche R, Uribelarrea JL, Molina-Jouve C, Nicaud JM. Yarrowia lipolytica as a model for bio-oil production. Prog Lipid Res. 2009;48:375–87.

    Article  CAS  PubMed  Google Scholar 

  47. Coelho MAZ, Amaral PFF, Belo I. Yarrowia lipolytica: an industrial workhorse. Curr Res Technol Educ Top Appl Microbiol Microb Biotechnol. 2010:930–44.

  48. Athenaki M, Gardeli C, Diamantopoulou P, Tchakouteu SS, Sarris D, Philippoussis A, et al. Lipids from yeasts and fungi: physiology, production and analytical considerations. J Appl Microbiol. 2018;124:336–67.

    Article  CAS  PubMed  Google Scholar 

Download references

Acknowledgements

Not applicable.

Funding

This work was supported by the European project “VOLATILE - Biowaste derived volatile fatty acid platform for biopolymers, bioactive compounds and chemical building blocks “(Call H2020-NMBP-BIO-2016 Grant agreement No. 720777) and by the strategic programme UID/BIA/04050/2013 (POCI-01-0145-FEDER-007569) funded by national funds through the FCT I.P., by the ERDF through the COMPETE2020.

Author information

Author notes

  1. Catarina Miranda, Sara Bettencourt, Tatiana Pozdniakova, Ricardo Franco-Duarte and Célia Pais contributed equally to this work.

Authors and Affiliations

  1. CBMA (Centre of Molecular and Environmental Biology), Department of Biology, University of Minho, Campus de Gualtar, 4710-057, Braga, Portugal

    Catarina Miranda, Sara Bettencourt, Tatiana Pozdniakova, Joana Pereira, Paula Sampaio, Ricardo Franco-Duarte & Célia Pais

  2. Institute of Science and Innovation for Bio-Sustainability (IB-S), University of Minho, Braga, Portugal

    Catarina Miranda, Sara Bettencourt, Tatiana Pozdniakova, Joana Pereira, Paula Sampaio, Ricardo Franco-Duarte & Célia Pais

Authors
  1. Catarina Miranda
    View author publications

    You can also search for this author in PubMed Google Scholar

  2. Sara Bettencourt
    View author publications

    You can also search for this author in PubMed Google Scholar

  3. Tatiana Pozdniakova
    View author publications

    You can also search for this author in PubMed Google Scholar

  4. Joana Pereira
    View author publications

    You can also search for this author in PubMed Google Scholar

  5. Paula Sampaio
    View author publications

    You can also search for this author in PubMed Google Scholar

  6. Ricardo Franco-Duarte
    View author publications

    You can also search for this author in PubMed Google Scholar

  7. Célia Pais
    View author publications

    You can also search for this author in PubMed Google Scholar

Contributions

CM, SB, TP and JP carried out the experiments. RFD, CP and PS designed the work. CM, SB, TP and RFD analysed the data. All authors drafted the manuscript and approved its final version.

Corresponding author

Correspondence to Ricardo Franco-Duarte.

Ethics declarations

Ethics approval and consent to participate

Not applicable.

Consent for publication

Not applicable.

Competing interests

Ricardo Franco-Duarte is a recipient of a fellowship from the Portuguese Science Foundation, FCT (SFRH/BPD/119197/2016).

Additional information

Publisher’s Note

Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.

Supplementary information

Rights and permissions

Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons licence, and indicate if changes were made. The images or other third party material in this article are included in the article's Creative Commons licence, unless indicated otherwise in a credit line to the material. If material is not included in the article's Creative Commons licence and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this licence, visit http://creativecommons.org/licenses/by/4.0/. The Creative Commons Public Domain Dedication waiver (http://creativecommons.org/publicdomain/zero/1.0/) applies to the data made available in this article, unless otherwise stated in a credit line to the data.

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Miranda, C., Bettencourt, S., Pozdniakova, T. et al. Modified high-throughput Nile red fluorescence assay for the rapid screening of oleaginous yeasts using acetic acid as carbon source. BMC Microbiol 20, 60 (2020). https://doi.org/10.1186/s12866-020-01742-6

Download citation

  • Received:

  • Accepted:

  • Published:

  • DOI: https://doi.org/10.1186/s12866-020-01742-6

Keywords

BMC Microbiology

ISSN: 1471-2180

Contact us