Skip to main content
Log in

Adiabatic Shear Susceptibility of Fe50Mn30Co10Cr10 High-Entropy Alloy

  • Published:
Metallurgical and Materials Transactions A Aims and scope Submit manuscript

Abstract

Dynamic loading of the Fe50Mn30Co10Cr10 high-entropy alloy (HEA) was carried out using a split Hopkinson pressure bar at room temperature. The effects of microstructures and loading strain rates on the adiabatic shear susceptibility of an Fe50Mn30Co10Cr10 HEA were evaluated for the first time by comparing metallographic observation, the stress collapse time, the critical values of strain corresponding to the adiabatic shearing initiation, and the adiabatic shearing formation energy per unit volume. The results show that the adiabatic shear susceptibility increases with the increase of loading strain rate. The smaller the grain size and the more hexagonal close-packed (hcp) phase of the Fe50Mn30Co10Cr10 HEA, the greater the strain hardening effect and the stronger the localized deformation resistance under the same dynamic loading conditions, and the lower the adiabatic shear susceptibility.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Institutional subscriptions

Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5

Similar content being viewed by others

References

  1. [1] B. Cantorb, I.T.H.Chang and P. Knight: Mater. Sci. Eng. A, 2004, vol. 375-377, pp. 213- 218.

    Google Scholar 

  2. [2] A.J. Zaddach, C. Niu, C.C. Koch and D.L. Irving: JOM, 2013, vol. 65, pp. 1780-1789.

    CAS  Google Scholar 

  3. [3] C.J.Tong, Y.L. Chen, J.W. Yeh, S.J. Lin, S.K. Chen, T.T. Shun, C.H. Tsau and S.Y. Chang: Metall. Mater. Trans. A, 2005, vol. 36, pp. 881-93.

    CAS  Google Scholar 

  4. [4] J.W. YEH: JOM, 2013, vol. 65, pp. 1759-71.

    CAS  Google Scholar 

  5. [5] Y. Zhang and W.J. Peng: Procedia Eng., 2012, vol.27, pp. 1169-78.

    Google Scholar 

  6. [6] Y.F. Ye, Q. Wang, J. Lu, C.T. Liu and Y. Yang: Mater. Today, 2016, vol. 19, pp. 349-62.

    CAS  Google Scholar 

  7. [7] F. Otto, Y. Yang, H. Bei and E.P. George: Acta Mater., 2013, vol. 61, pp. 2628-38.

    CAS  Google Scholar 

  8. [8] S. Basu, Z. Li, K.G. Pradeep and D. Raabe: Front. Mater., 2018, vol. 5, pp. 1-10.

    CAS  Google Scholar 

  9. [9] M.J. Yao, K.G. Pradeep, C.C. Tasan and D. Raabe: Scripta Mater., 2014, vol. 72-73, pp. 5-8.

    Google Scholar 

  10. [10] K.G. Pradeep, C.C. Tasan, M.J. Yao, Y. Deng, H. Springer and D. Raabe: Mater. Sci. Eng. A, 2015, vol. 648, pp. 183–92.

    CAS  Google Scholar 

  11. [11] Y. Deng, C.C. Tasan, K.G. Pradeep, H. Springer, A. Kostkaa and D. Raabe: Acta Mater., 2015, vol. 94, pp. 124–33.

    CAS  Google Scholar 

  12. [12] O.N. Senkov, G.B. Wilks, D.B. Miracle, C.P. Chuang and P.K. Liaw: Intermetallics, 2010, vol. 18, pp. 1758-65.

    CAS  Google Scholar 

  13. [13] Z.M. Li, K. G. Pradeep, Y. Deng, D. Raabe and C.C. Tasan: Nature, 2016, vol. 534, pp. 227-30.

    CAS  Google Scholar 

  14. [14] M.A. Meyers: Dynamic Behavior of Materials, John Wiley &Sons, Inc., New York, 1994.

    Google Scholar 

  15. M.A. Meyers, Y.B. Xu, Q. Xue, M.T. Perez-Prado and T.R. McNelley: Acta Mater., 2003, vol. 51, pp. 1307–25.

    CAS  Google Scholar 

  16. [16] Q. Xue and G.T. Gray: Metall. Mater. Trans. A, 2006, vol. 37A, pp. 2435-46.

    CAS  Google Scholar 

  17. [17] Y. Yang, X.L. Lian and J.L. Wang: J. Mater. Sci., 2019, vol. 54, pp. 7256-70.

    CAS  Google Scholar 

  18. [18] Y.B. Xu, W.L. Zhong,Y.J. Chen, L.T. Shen, Q. Liu, Y.L. Baic and M.A. Meyers: Mater. Sci. Eng. A, 2001, vol. 299, pp. 287-95.

    Google Scholar 

  19. [19] G.M. Owolabi, D.T. Bolling, A.A. Tiamiyu, R. Abua, A.G. Odeshi and H.A. Whitwortha: Mater. Sci. Eng. A, 2016, vol. 655, pp. 212-20.

    CAS  Google Scholar 

  20. [20] J. Peirs, W. Tirry, B. Amin-Ahmadi, F. Coghe, P. Verleysen, L. Rabet, D. Schryvers and J. Degrieck: Mater. Charact., 2013, vol. 75, pp. 79-92.

    CAS  Google Scholar 

  21. [21] Y. Yang and B. F. Wang: Mater. Lett., 2006, vol. 60, pp. 2198-2202.

    CAS  Google Scholar 

  22. [22] B.F. Wang and Y. Yang: Mater. Sci. Eng. A, 2008, vol. 473, pp. 306–11.

    Google Scholar 

  23. [23] Y. Yang, F. Jiang, B.M. Zhou, X.M. Li, H.G. Zheng, Q.M. Zhang and Y.Q. Zhao: Mater. Sci. Eng. A, 2011, vol. 528, pp. 2787-94.

    Google Scholar 

  24. [24] Y. Yang, X. M. Zhang, Z.H. Li and Q.Y. Li: Acta Mater., 1996, vol. 44, pp. 559-65.

    Google Scholar 

  25. [25] L. Zhen, D.L. Zou, C.Y. Xu and W.Z. Shao: Mater. Sci. Eng. A, 2010, vol. 527, pp. 5728–33.

    Google Scholar 

  26. [26] Y. Yang and L.H. Jiang: Mater. Sci. Eng. A, 2016, vol. 664, pp. 146–54.

    CAS  Google Scholar 

  27. [27] Y. Yang and L.H. Jiang: Mater. Sci. Eng. A, 2016, vol. 655, pp. 321–30.

    CAS  Google Scholar 

  28. [28] Y. Yang, L.H. Jiang, Z. Xu and Z. Wang: Mater. Sci. Eng. A, 2017, vol. 685, pp. 57-64.

    CAS  Google Scholar 

  29. [29]Y. Yang, S.J. Yang and L.H. Jiang: Mater. Character., 2019, vol. 156, art. no. 109840, https://doi.org/10.1016/j.matchar.2019.109840.

    Article  CAS  Google Scholar 

  30. [30] J.R. Li, J.L. Yu and Z.G. Wei: Int. J. Impact Eng., 2008, vol. 28, pp. 303-14.

    Google Scholar 

  31. [31] D. Rittel and R. Levin: Mech. Mater., 1998, vol. 30, pp. 197-216.

    Google Scholar 

  32. [32] L.H. Dai, L.F. Liu and Y.L. Bai: Int. J. Solids Struct., 2004, vol. 41, pp. 5979-93.

    Google Scholar 

  33. [33] M.N. Bassim and N. Panic: J. Mater. Process. Tech., 1999, vol. 92, pp. 481-85.

    Google Scholar 

  34. [34] Y. Yang, G.Y. Tan, P.X. Chen and Q.M. Zhang: Mater. Sci. Eng. A, 2012, vol. 546, pp. 279-83.

    CAS  Google Scholar 

  35. [35] W.D. Songa, M.L. Hua, H.S. Zhang and Y.X. Jin: Mater. Sci. Eng. A, 2018, vol. 725, pp. 76–87.

    Google Scholar 

  36. [36] W.S. Lee, T.H. Chen and G.T. Liu: Metal Sci. J., 2013, vol. 26, pp. 720-25.

    Google Scholar 

  37. [37] Y. Yang, L.H. Jiang, S.H. Luo, H.B. Hu, T.G. Tang and Q.M. Zhang: J. Mater. Eng. Perform., 2016, vol. 25, pp. 29-37.

    CAS  Google Scholar 

  38. [38] N. Kumar, Q. Ying, X. Nie, R.S. Mishra, Z. Tang and P.K. Liaw: Mater. Design, 2015, vol. 86, pp. 598–602.

    CAS  Google Scholar 

  39. [39] Z. Li, S. Zhao, H. Diao, P. K. Liaw and M.A. Meyers: Nature, 2017, vol. 7, pp. 1-8.

    Google Scholar 

  40. [41] Z.Z. Li, S.T. Zhao, S. M. Alotaibi, Y. Liu, B.F. Wang and M. A. Meyers: Acta Mater., 2018, vol. 151, pp. 1-23.

    Google Scholar 

  41. S.J. Yang, Y. Yang and H.M. Wang: Adv. Eng. Mater., 2019. https://doi.org/10.1002/adem.201900868.

    Article  Google Scholar 

  42. [42] P. Haušild, V. Davydov, J. Drahokoupil, M. Landa and P. Pilvin: Mater. Design, 2010, vol. 31, pp. 1821–27.

    Google Scholar 

  43. [43] S. Basu, Z.M. Li, K. G. Pradeep and D. Raabe: Frontiers in Mater., 2018, vol. 5, pp. 1-10.

    CAS  Google Scholar 

  44. [44] Z.M. Li, C.C. Tasan, K.G. Pradeep and D. Raabe: Acta Mater., 2017, vol. 131, pp. 323-35.

    CAS  Google Scholar 

  45. [45] Y.Z. Guo, Y.L. Li, Z. Pan, F.H. Zhou and Q. Wei: Mech. Mater., 2010, vol. 42, pp. 1020-29.

    Google Scholar 

  46. [46] D.E. Grady: Mech. Mater., 1994, vol. 17, pp. 289-93.

    Google Scholar 

Download references

Acknowledgments

This work is supported by the National Natural Science Foundation of China (Nos. 51871243, 51574290) and Hunan Provincial Natural Science Foundation of China (No. 2019JJ40381).

Author information

Authors and Affiliations

Authors

Corresponding author

Correspondence to Yang Yang.

Additional information

Publisher's Note

Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.

Manuscript submitted July 9, 2019.

Rights and permissions

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Yang, S., Yang, Y., Yang, Z. et al. Adiabatic Shear Susceptibility of Fe50Mn30Co10Cr10 High-Entropy Alloy. Metall Mater Trans A 51, 1771–1780 (2020). https://doi.org/10.1007/s11661-020-05641-3

Download citation

  • Received:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s11661-020-05641-3

Navigation