Ultrasound pretreatment was optimised by response surface methodology.
•
Optimal conditions were 20% US power, 60 min, 26.3 °C, and 17.3% w/v biomass load.
•
Ultrasound pretreatment of spent grains lead to 2.1-fold higher reducing sugar yield.
•
Ethanol content of 17.73 g/ 100 g of pretreated BSG obtained after fermentation.
•
Ultrasound pretreatment is a potential technology for valorisation of spent grains.
Abstract
This paper deals with the investigation of ultrasound (US) pretreatment of brewer’s spent grain (BSG) as a means of releasing fermentable sugars, and the subsequent production of ethanol from this lignocellulosic biomass. Using response surface methodology (RSM), the influence of US power, time, temperature and biomass loading on fermentable sugar yield from BSG was studied. The optimal conditions were found to be 20% US power, 60 min, 26.3 °C, and 17.3% w/v of biomass in water. Under these conditions, an approximate 2.1-fold increase in reducing sugar yield (325 ± 6 mg/g of biomass) was achieved, relative to untreated BSG (151.1 ± 10 mg/g of biomass). In contrast to acid or alkaline pretreatment approaches, the use of water obviated the need for neutralization for the recovery of sugars. The characterization of native and pretreated BSG was performed by HPLC, FTIR, SEM and DSC. Fermentation studies using S. cerevisiae growing on pretreated BSG resulted in a conversion of 66% of the total sugar content ininto ethanol with an ethanol content of 17.73 ± 2 g/ 100 g of pretreated BSG. These results suggest that ultrasound pretreatment is a promising technology for increased valorization of BSG as a feedstock for production of bioethanol, and points ton the need for further work in this area.
