Issue 7, 2020

Dynamic screening and printing of single cells using a microfluidic chip with dual microvalves

Abstract

Inoculation of single cells into separate culture chambers is one of the key requirements in single-cell analysis. This paper reports an innovative microfluidic chip integrating two pneumatic microvalves to screen and print single cells onto a well plate. The upper and lower size limits of cells can be dynamically controlled by regulating the deformation of two adjacent microvalves. Numerical simulations were employed to systematically study the influence of membrane dimensions and pressure on the deflection of a valve. A mathematical model was then modified to predict the size of cells captured by a microvalve at various pressures. The membrane deflection was further studied using confocal imaging. The critical pressure trapping beads of various sizes was experimentally determined. These experiments validated the accuracy of both numerical simulations and the mathematical model. Furthermore, single beads and endothelial cells with the desired size range were screened using dual valves and printed onto well plates with 100% efficiency. Viability studies suggested that the screening process had no significant impact on cells. This device enables dynamic regulation of both the lower and the upper size limits of cells for printing. It has significant application potential in inoculating cells with desired sizes for various fields such as clonal expansion, monoclonality development and single-cell genomic studies.

Graphical abstract: Dynamic screening and printing of single cells using a microfluidic chip with dual microvalves

Supplementary files

Article information

Article type
Paper
Submitted
14 Jan 2020
Accepted
17 Feb 2020
First published
17 Feb 2020

Lab Chip, 2020,20, 1227-1237

Dynamic screening and printing of single cells using a microfluidic chip with dual microvalves

C. Chen, D. Xu, S. Bai, Z. Yu, Y. Zhu, X. Xing and H. Chen, Lab Chip, 2020, 20, 1227 DOI: 10.1039/D0LC00040J

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements