Abstract
ZnO is considered to be the next generation lithium-ion battery anode material due to its high theoretical capacity, low potential, abundant resources and low toxicity. However, high volume expansion during charge–discharge process makes ZnO powdered and agglomerated easily. In the work, we fabricate a porous carbon skeleton by using rice husk (RH) lignin, and the ZnO nanoparticles are supported on the skeleton uniformly. Its unique structure provides excellent stability and electrical conductivity. RH as a carbon source will improve the utilization rate of biomass materials in the refining process. The samples were characterised by XRD, Raman, TG, SEM and transmission electron microscopy, and the materials presented a promising Li storage properties and electrochemical performance with a discharge capacity of 898.1 mAh g−1 at 0.2C after 110 cycles, which is very close to the theoretical specific capacity of zinc oxide (978 mAh g−1).
Similar content being viewed by others
References
A. Eftekhari, ACS Sustain. Chem. Eng. 7, 5602–5613 (2019)
G. Zhang, S. Hou, H. Zhang, Adv. Mater. 27, 2400–2405 (2015)
S. Kundu, S. Sain, M. Yoshio, Appl. Surf. Sci. 329, 206–211 (2015)
J. Kim, S.A. Hong, J. Yoo, Chem. Eng. J. 266, 179–188 (2015)
H. Li, Y. Wei, Y. Zhao et al., J. Nanomater. 7, 1–6 (2016)
Q. Xie, J. Li, Q. Tian, J. Mater. Chem. 22, 13541–13547 (2012)
N. Li, S. Jin, Q. Liao et al., ACS Appl. Mater. Interfaces 6, 20590 (2014)
Y. Song, Y. Chen, J. Wu et al., J. Alloy Compd. 694, 1246–1253 (2017)
T. Deng, X. Zhou, Mater. Lett. 176, 151–154 (2016)
H. Köse, K. Şeyma, A.O. Aydın, J. Power Sources 295, 235–245 (2015)
L. Ji, X. Zhang, Electrochim. Commun. 11, 684–687 (2009)
G.T.K. Fey, D.C. Lee, Y.Y. Lin, T.P. Kumar, Synth. Met. 139, 71–80 (2003)
R.A. Adams, A.D. Dysart, R. Esparza et al., Ind. Eng. Chem. Res. 55, 8706–8712 (2016)
G.T.K. Fey, C.L. Chen, J. Power Sources 97(98), 47–51 (2001)
E. Peleda, V. Eshkenazi, Y. Rosenberg, J. Power Sources 76, 153–158 (1998)
J. Zhang, J. Xiang, Z. Dong et al., Electrochim. Acta 116, 146–151 (2014)
Y. Li, Y. Gao, H. Qi, K. Yu, C. Liang, RSC Adv. 8, 33019–33024 (2018)
J. Hou, C. Cao, X. Ma, F. Idrees, B. Xu, X. Hao, W. Lin, Sci. Rep. 4, 7260–7265 (2014)
R. Pode, Renew. Sustain. Energy Rev. 53, 1468–1485 (2016)
H.J. Kim, J.H. Choi, J.W. Choi, Nano Converg. 4, 24 (2017)
T.K. Fey, C.L. Chen, J. Power Sources 97, 47–51 (2001)
W. Yu, X. Chen, W. Mei, Appl. Surf. Sci. 4, 129–138 (2017)
C. He, S. Wu, N. Zhao, ACS Nano 7, 4459–4469 (2013)
H. Fan, H. Yu, Y. Zhang et al., Nano Energy 33, 168–176 (2017)
H. Asayesh-Ardakani, W. Yao, Y. Yuan et al., Small Methods 1, 1700202 (2017)
X. Sun, C. Zhou, M. Xie et al., J. Mater. Chem. A 2, 7319–7326 (2014)
A. Kumar, H.M. Jena, Appl. Surf. Sci. 356, 753–761 (2015)
J. Hu, D. Shen, S. Wu et al., J. Anal. Appl. Pyrolysis 127, 444–450 (2017)
J. Hayashi, A. Kazehaya, K. Muroyama et al., Carbon 38, 1873–1878 (2000)
C. Chen, L. Wei, P. Zhao, Adv. Mater. Res. 152–153, 1322–1327 (2010)
S. Wang, L. Yang, L.P. Stubbs et al., ACS Appl. Mater. Interfaces 5, 12275–12282 (2013)
K. Yu, J. Li, H. Qi, ChemistrySelect 2, 3627–3632 (2017)
J.H. Lee, K.H. Ko, B.O. Park, J. Cryst. Growth 247, 119–125 (2003)
Z. Ren, Z. Wang, C. Chen, J. Cryst. Growth 146, 52–59 (2014)
Y. Sharma, N. Sharma, G.V. Subba Rao, Adv. Funct. Mater. 17, 2855–2861 (2007)
N. Dkhireche, A. Dahami, A. Rochdi, J. Ind. Eng. Chem. 19(6), 1996–2003 (2013)
G. Rong, W. Yue, Y. An, Electrochim. Acta 35, 161–167 (2014)
J. Liu, Y. Li, X. Huang, Adv. Funct. Mater. 18, 1448–1458 (2008)
A. Eftekhari, Energy Storage Mater. 7, 157–180 (2017)
Y. Chen, C. Yan, G.S. Oliver, Adv. Energy Mater. 3, 1269–1274 (2013)
S.M. Abbas, S.T. Hussain, S. Ali, J. Mater. Sci. 48, 5429–5436 (2013)
Z. Chen, R. Wu, H. Wang, Chem. Eng. J. 326, 680–690 (2017)
Q. Zhan, X. Hui, N. Hui, J. Alloys Compd. 737, 330–336 (2018)
Y. Zou, Z. Qi, Z. Ma, J. Electroanal. Chem. 788, 184–191 (2017)
Acknowledgements
This work was financially supported by National Key Research and Development Program of China (2016YFF0201204); the Project of Jilin Provincial Science and Technology Department (20180201074GX, 20190201110JC, 20190302055GX); Project of Jilin Province Development and Reform Commission (2019C046-2); Open Project of State Key Laboratory of Inorganic Synthesis and Preparative Chemistry, College of Chemistry, Jilin University (2019–8).
Author information
Authors and Affiliations
Corresponding authors
Additional information
Publisher's Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
About this article
Cite this article
Yu, K., Liu, T., Zheng, Q. et al. Rice husk lignin-based porous carbon and ZnO composite as an anode for high-performance lithium-ion batteries. J Porous Mater 27, 875–882 (2020). https://doi.org/10.1007/s10934-019-00824-9
Published:
Issue Date:
DOI: https://doi.org/10.1007/s10934-019-00824-9