Skip to main content

Advertisement

Log in

Evaluation of Fluidization Process for Recovery of Metals from Discarded Printed Circuit Boards

  • Research Article
  • Published:
Journal of Sustainable Metallurgy Aims and scope Submit manuscript

Abstract

Technological advancements and the ever-increasing demand for the latest electronic gadgets lead to the huge generation of waste. Printed circuit boards are key connecting components of any electronic device, and the presence of significant metallic values such as copper can be regarded as a valuable secondary source. The discarded printed circuit boards are grounded to − 1 mm size and they consist of 30–40% metal values and 60–70% plastic–organic fraction. Due to the presence of a high amount of plastics in the feed, separation between the plastic and the metallic fraction is necessary for effective recycling. In this study, air and water-based fluidization processes are experimentally investigated for the separation of metallic values. Combined fluidization concentrate yielded a grade of about 90% with an overall recovery of 35%. It was found that the combination of air and water fluidization is a promising route to recover metals from electronic scrap as it is cost-effective and environment-friendly. The underflow fraction obtained consists of 87% metal fraction (Al, Cu, Zn, Pb, and Sn) and can be further used in alloy-making applications.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Institutional subscriptions

Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5
Fig. 6
Fig. 7
Fig. 8

Similar content being viewed by others

References

  1. Arshadi M, Yaghmaei S, Mousavi SM (2019) Content evaluation of different waste PCBs to enhance basic metals recycling. Resour Conserv Recycl 139:298–306

    Article  Google Scholar 

  2. Golev A, Corder GD, Rhamdhani M (2019) Estimating flows and metal recovery values of waste printed circuit boards in Australian e-waste. Miner Eng 137(15):171–176

    Article  CAS  Google Scholar 

  3. Verma HR, Singh KK, Basha SM (2018) Effect of milling parameters on the concentration of copper content of hammer-milled waste PCBs: a case study. J Sustain Metall 4:187–193

    Article  Google Scholar 

  4. Eswaraiah C, Kavitha T, Vidyasagar S, Narayanan SS (2008) Classification of metals and plastics from printed circuit boards (PCB) using air classifier. Chem Eng Process 47:565–576

    Article  CAS  Google Scholar 

  5. Rajarao R, Farzana R, Sahajwalla V (2018) Transforming waste printed circuit boards and compact discs for the synthesis of valuable ferrosilicon alloy. J Sustain Metall 4:461–469

    Article  Google Scholar 

  6. Sahajwalla V, Cayumil R, Khanna R, Ikram-Ul-Haq M, Rajarao R, Mukherjee PS, Hill A (2015) Recycling polymer-rich waste printed circuit boards at high temperatures: recovery of value-added carbon resources. J Sustain Metall 1:75–84

    Article  Google Scholar 

  7. Estrada-Ruiz RH, Flores-Campos R, Gamez-Altamirano HA, Velarde-Sanchez EJ (2016) Separation of the metallic and non-metallic fraction from printed circuit boards employing green technology. J Hazard Mater 311:91–99

    Article  CAS  Google Scholar 

  8. Han Y, He W, Li L, Li G, Huang J (2016) Mathematical analysis of the gas-solid fluidized bed separation of metals and nonmetals from waste PCB powders. Powder Technol 295:142–151

    Article  CAS  Google Scholar 

  9. Das A, Vidyadhar A, Mehrotra SP (2009) A novel flowsheet for the recovery of metal values from waste printed circuit boards. Resour Conserv Recycl 53:464–469

    Article  Google Scholar 

  10. Chao G, Wang H, Liang W, Fu J, Yi X (2011) Liberation characteristic and physical separation of the printed circuit board (PCB). Waste Manage 31:2161–2166

    Article  Google Scholar 

  11. Nekouei RK, Pahlevani F, Rajarao R, Golmohammadzadeh R, Sahajwalla V (2018) Two-step pre-processing enrichment of waste printed circuit boards: mechanical milling and physical separation. J Clean Prod 184:1113–1124

    Article  CAS  Google Scholar 

  12. Kumar V, Lee JC, Jeong J, Jha MK, Kim BS, Singh R (2013) Novel physical separation process for eco-friendly recycling of rare and valuable metals from end-of-life DVD-PCBs. Sep Purif Technol 111:145–154

    Article  CAS  Google Scholar 

  13. Sahajwalla V (2018) Gaikwad A (2018) The present and future of e-waste plastics recycling. Curr Opin Green Sustain Chem 13:102–107

    Article  Google Scholar 

  14. Zhang G, Wang H, Yang J, He Y, Zhang T (2018) Application of electric field to a fluidized bed for recovering residual metals from fine particles of the non-metallic fraction of waste printed circuit boards. J Clean Prod 187:1036–1042

    Article  CAS  Google Scholar 

  15. Zhang G, He Y, Feng Y, Zhang T, Wang H, Zhu X (2018) Recovery of residual metals from fine nonmetallic fractions of waste printed circuit boards using a vibrated gas-solid fluidized bed. Sep Purif Technol 207:321–328

    Article  CAS  Google Scholar 

  16. Wang H, Zhang G, Hao J, He Y, Zhang T, Yang X (2018) Morphology, mineralogy and separation characteristics of nonmetallic fractions from waste printed circuit boards. J Clean Prod 170:1501–1507

    Article  CAS  Google Scholar 

Download references

Acknowledgements

The authors acknowledge the funding received from Indian Institute of Technology, Roorkee (Faculty Initiation Grant; FIG-100714) and thank Himanshu Tanvar for his efforts in fluidization set up.

Author information

Authors and Affiliations

Authors

Corresponding author

Correspondence to Nikhil Dhawan.

Ethics declarations

Conflict of interest

On behalf of all authors, the corresponding author states that there is no conflict of interest.

Additional information

The contributing editor for this article was Bernd Friedrich.

Publisher's Note

Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.

Rights and permissions

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Barnwal, A., Dhawan, N. Evaluation of Fluidization Process for Recovery of Metals from Discarded Printed Circuit Boards. J. Sustain. Metall. 5, 519–527 (2019). https://doi.org/10.1007/s40831-019-00242-w

Download citation

  • Received:

  • Revised:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s40831-019-00242-w

Keywords

Navigation