Abstract
Established were the regularities of variations of the temperature, cutting tool force and roughness of the machined surface for different cutting rates at the precision turning of aluminium and brass alloys using a cutter with the diamond-hard alloy plate.
Similar content being viewed by others
References
Tools of superhar dmaterials, N.V. Novikov, S.A. Klimenko, Eds., Moscow: Mashinostroenie, 2014.
Nepomnyashchiy, V.A., Volkov, D.I., and Proskuryakov, S.L., Chip formation during the treatment of aluminum alloys with diamond tools, Engineering Journal, 2003, no. 10, pp. 21–25.
Proskuryakov, S.L., Chip formation and heat processes at high-speed treatment of heatproof alloys, Engineering Journal, 2009, no. 4, pp. 41–43.
Kolev, K.S. and Gorchakov, L.M., The accuracy of the processing and cutting conditions, Moscow: Machine-building, 1976.
Stakhniv, N.E., Devin, L.N., Petrusha, I.A., and Osipov, A.S., Dynamic phenomena in finish turning of hardened steels with c BN-based tools, J. Superhard Mater., 2009, vol. 31, no. 3, pp. 196–202.
Venttsel’, E.S., Probability theory, Moscow: Nauka, 1969.
Novikov, N.V. and Shul’zhenko, A.A., New superhard materials and their application in the industry, J. Superhard Mater., 1987, no. 5, pp. 8–14.
Devin, L.N., Prediction of the working capacity of metal-cutting tools, Kiev: Naukova Dumka, 1992.
Devin, L.N. and Sulima, A.G., The application of the Power Graph packet for investigation of the process of cutting, Industrial Measurement: Control, Avtomatizatsiya, Diagnostics, 2008, no. 3, pp. 24–26.
Devin, L.N., Stakhniv, N.E., Antonyuk, A.S., Rychev, S.V., and Nechiporenko, V.N., The Influence of the cutting speed on the temperature and force at the precision turning of VTI-0 titanium alloy using a cutter with diamond-hard alloy plate, J. Superhard Mater., 2019, no. 2, pp. 65–73.
Author information
Authors and Affiliations
Corresponding author
Additional information
Russian Text © The Author(s), 2019, published in Sverkhtverdye Materialy, 2019, Vol. 41, No. 3, pp. 48–56.
About this article
Cite this article
Stakhniv, N.F., Devin, L.N. The Influence of the Cutting Speed on the Temperature and Forces at the Precision Turning of Nonferrous Metals Using Cutters with Round Diamond-Hard-Alloyed Plates. J. Superhard Mater. 41, 178–184 (2019). https://doi.org/10.3103/S1063457619030055
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.3103/S1063457619030055