Abstract
Bulk composite materials based on AMg2 aluminum alloy reinforced with 0.05 wt % multiwall carbon nanotubes (MWCNT) or MWCNT decorated with TiC nanoparticles were produced by powder metallurgy. A comparative analysis of the structural and phase composition and properties of the powder composites was made. It was determined that the compressive offset yield strength of the MWCNT-hybrid-filled aluminum matrix composite exceeds that of the MWCNT-filled aluminum matrix composite.
Similar content being viewed by others
REFERENCES
Kwon, H., Estili, M., Takagi, K., Miyazaki, T., and Kawasaki, A., Carbon, 2009, vol. 47, pp. 570–577.
Zhou, W., Yamaguchi, T., Kikuchi, K., Nomura, N., and Kawasaki, A., Acta Mater., 2017, vol. 125, pp. 369–376.
Chen, B., Shen, J., Ye, X., Imai, H., Umeda, J., Takahashi, M., and Kondoh, K., Carbon, 2017, vol. 114, pp. 198–208.
Yan, L., Tan, Z., Ji, G., Li, Z., Fan, G., Schryvers, D., Shan, A., and Zhang, D., Mater. Charact., 2016, vol. 112, pp. 213–218.
Kremlev, K.V., Ob’’edkov, A.M., Semenov, N.M., Kaverin, B.S., Ketkov, S.Yu., Gusev, S.A., Yunin, P.A., Elkin, A.I., and Aborkin, A.V., Tech. Phys. Lett., 2018, vol. 44, no. 10, pp. 865–868.
Aborkin, A.V., Khor’kov, K.S., Ob’’edkov, A.M., Kremlev, K.V., Tech. Phys. Lett., 2019, vol. 45, no. 1, pp. 20–23.
Kremlev, K.V., Ob"edkov, A.M., Ketkov, S.Yu., Kaverin, B.S., Semenov, N.M., Gusev, S.A., Tatarskii, D.A., and Yunin, P.A., Tech. Phys. Lett., 2016, vol. 42, no. 5, pp. 517–519.
Estili, M. and Kawasaki, A., Adv. Mater., 2010, vol. 22, no. 5, pp. 607–610.
Ob’’edkov, A.M., Kaverin, B.S., Egorov, V.A., Semenov, N.M., Ketkov, S.Yu., Domrachev, G.A., Kremlev, K.V., Gusev, S.A., Perevezentsev, V.N., Moskvichev, A.N., Moskvichev, A.A., and Rodionov, A.S., Pis’ma Mater., 2012, vol. 2, pp. 152–156.
Funding
This work was supported by the Russian Science Foundation (project no. 18-79-10227).
Author information
Authors and Affiliations
Corresponding author
Additional information
Translated by V. Glyanchenko
Rights and permissions
About this article
Cite this article
Aborkin, A.V., Babin, D.M., Zalesnov, A.I. et al. Changes in the Mechanical Properties of Powder Aluminum Matrix Composites Modified by Microadditives of Hybrid Materials Based on Multiwall Carbon Nanotubes Decorated with Titanium Carbide Nanoparticles. Dokl Phys Chem 488, 113–116 (2019). https://doi.org/10.1134/S001250161909001X
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1134/S001250161909001X