Abstract
Residual thermal stresses in a three-phase cermet composite with a layer-structured refractory component (WC-coated SiC grains) are studied by analytical methods. The layer of residual thermal stresses in such alloys is found to significantly depend on the composition and volume content of the layers and binder phases. The data obtained for the alloys with a large amount of the binder phase are in good agreement with the results of calculation by a different numerical model.
References
Bondarenko, V.P., Evdokimova, O.V, and Matviychuk, A.A., The influence of amount of the VN65 binder on the SiC grit retention in a composite in grinding, in Porodorazrushayushchii i metalloobrabatyvayushchii instrument—tekhnika i tekhnologiya ego izgotovleniya iprimeneniya. Sb. Nauch. Tr. (Rock-Destruction and Metal-Working Tools. Techniques and Technology of Their Production and Applications. Collected Research Papers), Kyiv: ISM NAN Ukrainy, 2016, issue 19, pp. 391–395.
Bondarenko, V.P., Evdokimova, O.V., Matveichuk, A.A., and Duda, T.M., Effect of the coating type on retaining SiC particles in the composite during grinding, Powder Metall. Met. Ceram., 2016, no. 5–6, pp. 369–373.
Grabowski, G. and Pedzich, Z., Modeling of thermal residual stresses in the SiC-TiB2 composite system considering real microstructure and thermo-mechanical properties anisotropy, Ceram. Mater., 2016, vol. 68, no. 2, pp. 176–182.
Kayser W., Bezld A., Broeckmann C. Simulation of residual stresses in cemented carbides, Int J. Refract. Met. Hard Mater., 2017, vol. 63, pp. 55–62.
Hashin, Z. and Shtrikman, S., A variational approach to the theory of the elastic behaviour of multiphase materials, J. Mech. Phys. Solids, 1963, vol. 11, pp. 127–140.
Guz, A.N. (Ed.), Mekhanika kompozitov (Composite Machanics), Volume 3: Khoroshun, L.P. (Ed.), Statisticheskaya mekhanika i effektivnye svoistva materialov (Statistical Mechanics and Effective Properties of Materials), Kiev: Naukova Dumka, 1993.
Saltykov, S.A., Stereometricheskaya metallografiya (Stereometric Metallography), Moscow: Metallurgiya, 1970.
Litoshenko, N.V., Algorithm of determining the ratio between cobalt interlayer and carbide grain size from the results of measurements in the thin section plane, J. Superhard Mater., 2007, no. 5, pp. 323–325.
Krawits, A.D., Reichel, D.G., and Hitteman, R., Residual stress and stress distribution in a WC–Ni composite, Mater. Sci. Eng., 1989, vol. 119, no. 1/2, pp. 127–134.
Doi, H., Fujiwara, Y., Miyake, K., and Oosawa, Y., A systematic investigation of elastic moduli of WC–Co alloys, Met. Trans., 1970, vol. 1, no. 5, pp. 1417–1425.
Krawits A.D., Reichel D.G., Hittemen R.L. Thermal expansion of tungsten carbide at low temperature. J. Amer. Ceram. Sos., 1989, vol. 72, no. 3, pp. 515–517.
Kornienko, A.O., Stress-strain state in a composite under friction at elevated temperatures, Probl. Tert. Znoshuv., 2013, no. 2, pp. 88–91.
Andrievskii, R.A. and Spivak, Prochnost’ tugoplavkikh soedinenii i materialov na ikh osnove (Strength of Refractory Compounds and Related Materials), Chelyabinsk: Metallurgiya, 1989.
Fesenko, I.P., Prokopiv, M.M., Chasnyk, V.I., Kaidash, O.M., Oliynyk, G.S., and Kuzhenkova, M.O., Alyumonitrydni funktsional’ni materialy, oderzhani z nanodyspersnykh ta mikronnykh poroshkiv garyachym presuvannyam ta vil’nym spikannyam (Aluminum Nitride Base Functional Materials Produced from Nanodispersed and Micron Powders by Hot Pressing and Pressureless Sintering), Kyiv: EPC ALKON, 2015.
Acknowledgment
We thank Dr. Sci. (Phys.-Math.) Kushch for setting up the model problem and finding a numerical solution thereof.
Author information
Authors and Affiliations
Corresponding author
Additional information
Ukrainian Text © The Author(s), 2019, published in Sverkhtverdye Materialy, 2019, Vol. 41, No. 5, pp. 95–100.
About this article
Cite this article
Bondarenko, V.P., Litoshenko, N.V. Residual Thermal Stresses in a Three-Phase Cermet Composite with a Layer-Structured Refractory Component. J. Superhard Mater. 41, 364–368 (2019). https://doi.org/10.3103/S1063457619050095
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.3103/S1063457619050095