Correction to: International Journal of Material Forming

Fig. 3
figure 1

Predicted anisotropy in plastic properties: (a) variation of the yield stress ratios σ(α)/σ(0) and, (b) Lankford coefficients r(α) with respect to the angle α between the loading axis and the RD axis [100] in the {100}〈001〉 plane corresponding to: m2 =1.39, n1=2.42, n3 =0.37, n4 =6.8, c = 0.35 based on yield stress data for an Al 5% Cu single crystal reported in [26]

https://doi.org/10.1007/s12289-018-01465-0

In the original publication of this paper, an incorrect image of Figure 3 was used in error. Please see below for the correct image.