Skip to main content

Advertisement

Log in

Graphene aerogel-based phase changing composites for thermal energy storage systems

  • Review
  • Published:
Journal of Materials Science Aims and scope Submit manuscript

Abstract

Phase changing materials (PCM) release or absorb heat in high quantity when there is a variation in phase. PCMs show good energy storage density, restricted operating temperatures and hence find application in various systems like heat pumps, solar power plants, electronic devices, thermal energy storage (TES) systems. Though it has extensive usage in such a diverse range of systems, PCMs have some limitations like poor thermal conductivity, susceptibility to leakage during phase transformations. To overcome these shortcomings, phase changing composites (PCCs) were fabricated. PCCs are an amalgamation of filler material with PCMs to form a composite with those anticipated or desired properties. There are multiple factors like porosity, sealing performance, leaking holding capacity, shape stability, thermal conductivity that should be taken into consideration/account while fabricating PCCs. Having considered such factors, graphene, which has high thermal conductivity (2000–4000 W/m K) and high specific surface area (~ 2630 m2 g−1), acts as a suitable candidate for synthesizing an effective and efficient PCC. In its aerogel form, it is used as a conductive filler or form-stabilizer, to improve the thermal conductivity (~ 5.89 W/m K) and heat transfer of PCMs like reduced graphene oxide. Graphene aerogels, thus, are used in PCM as latent heat storage (LHS) for thermal energy storage systems. Many of the researchers have based their work focus on graphene aerogels in PCMs, significant roles of such PCCs, their advantages and disadvantages; this paper is an effort to elucidate those and provide further insight into TES systems in which LHS is explicitly used in PCMs and their practical aspect.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Institutional subscriptions

Figure 1
Figure 2
Figure 3
Figure 4
Figure 5
Figure 6
Figure 7
Figure 8
Figure 9
Figure 10
Figure 11
Figure 12
Figure 13
Figure 14
Figure 15
Figure 16
Figure 17
Figure 18
Figure 19

Similar content being viewed by others

References

  1. Adib RENR, Folkecenter M, Development Bank A et al (2018) Report renewable energy

  2. Breeze P (2018) An introduction to energy storage technologies. Power Syst Energy Storage Technol. https://doi.org/10.1016/b978-0-12-812902-9.00001-8

    Article  Google Scholar 

  3. Lead-Acid Battery Market (2013-2023). https://www.psmarketresearch.com/market-analysis/lead-acid-battery-market. Accessed 30 Dec 2019

  4. Dinçer İ, Rosen MA (2010) Thermal energy storage. Wiley, Chichester

    Book  Google Scholar 

  5. Aneke M, Wang M (2016) Energy storage technologies and real life applications—a state of the art review. Appl Energy 179:350–377. https://doi.org/10.1016/j.apenergy.2016.06.097

    Article  Google Scholar 

  6. Mahlia TMI, Saktisahdan TJ, Jannifar A et al (2014) A review of available methods and development on energy storage; technology update. Renew Sustain Energy Rev 33:532–545. https://doi.org/10.1016/j.rser.2014.01.068

    Article  Google Scholar 

  7. Kalaiselvam S, Parameshwaran R (2014) Sustainable thermal energy storage. Therm Energy Storage Technol Sustain. https://doi.org/10.1016/b978-0-12-417291-3.00009-8

    Article  Google Scholar 

  8. Li P-W, Chan CL (2017) Introduction. Therm Energy Storage Anal Des. https://doi.org/10.1016/b978-0-12-805344-7.00001-8

    Article  Google Scholar 

  9. Qu Y, Li Q, Cai L et al (2018) Thermal camouflage based on the phase-changing material GST. Light Sci Appl 7:3–4. https://doi.org/10.1038/s41377-018-0038-5

    Article  CAS  Google Scholar 

  10. Wang X, Li G, Hong G et al (2017) Graphene aerogel templated fabrication of phase change microspheres as thermal buffers in microelectronic devices. ACS Appl Mater Interfaces 9:41323–41331. https://doi.org/10.1021/acsami.7b13969

    Article  CAS  Google Scholar 

  11. Plytaria MT, Bellos E, Tzivanidis C, Antonopoulos KA (2019) Numerical simulation of a solar cooling system with and without phase change materials in radiant walls of a building. Energy Convers Manag 188:40–53. https://doi.org/10.1016/j.enconman.2019.03.042

    Article  Google Scholar 

  12. Zhang Q, Uchaker E, Candelaria SL, Cao G (2013) Nanomaterials for energy conversion and storage. Chem Soc Rev 42:3127–3171. https://doi.org/10.1039/c3cs00009e

    Article  CAS  Google Scholar 

  13. Ye Q, Tao P, Chang C et al (2019) Form-stable solar thermal heat packs prepared by impregnating phase-changing materials within carbon-coated copper foams. ACS Appl Mater Interfaces 11:3417–3427. https://doi.org/10.1021/acsami.8b17492

    Article  CAS  Google Scholar 

  14. Qiu L, Niu RP, Tan Z (2012) Experimental research of PCMs-TH29 using on building energy storage. Adv Mater Res 569:202–206. https://doi.org/10.4028/www.scientific.net/amr.569.202

    Article  CAS  Google Scholar 

  15. Sharma A, Tyagi VV, Chen CR, Buddhi D (2009) Review on thermal energy storage with phase change materials and applications. Renew Sustain Energy Rev 13:318–345. https://doi.org/10.1016/j.rser.2007.10.005

    Article  CAS  Google Scholar 

  16. Lee D, Lee S-G, Kim S (2017) Composite phase-change material mold for cost-effective production of free-form concrete panels. J Constr Eng Manag 143:04017012. https://doi.org/10.1061/(asce)co.1943-7862.0001300

    Article  Google Scholar 

  17. Shin Y, Il Yoo D, Son K (2005) Development of thermoregulating textile materials with microencapsulated phase change materials (PCM). II. Preparation and application of PCM microcapsules. J Appl Polym Sci 96:2005–2010. https://doi.org/10.1002/app.21438

    Article  CAS  Google Scholar 

  18. Arjun Dakuri, Hayavadana J (2014) Thermal energy storage materials (PCMs) for textile applications. J Text Appar Technol Manag 2014:561–565

    Google Scholar 

  19. Onofrei E, Rocha AM, Catarino A (2010) Textiles integrating pcms—a review. Technology Lx:109–110

  20. Revaiah RG, Kotresh TM, Kandasubramanian B (2019) Technical textiles for military applications. J Text Inst. https://doi.org/10.1080/00405000.2019.1627987

    Article  Google Scholar 

  21. Prajapati DG, Kandasubramanian B (2019) A review on polymeric-based phase change material for thermo-regulating fabric application. Polym Rev. https://doi.org/10.1080/15583724.2019.1677709

    Article  Google Scholar 

  22. Saini S, Kandasubramanian B (2018) Engineered smart textiles and Janus microparticles for diverse functional industrial applications. Polym Plast Technol Eng. https://doi.org/10.1080/03602559.2018.1466177

    Article  Google Scholar 

  23. Gupta P, Kandasubramanian B (2017) Directional fluid gating by Janus membranes with heterogeneous wetting properties for selective oil–water separation. ACS Appl Mater Interfaces 9:19102–19113. https://doi.org/10.1021/acsami.7b03313

    Article  CAS  Google Scholar 

  24. Gore PM, Kandasubramanian B (2018) Heterogeneous wettable cotton based superhydrophobic Janus biofabric engineered with PLA/functionalized-organoclay microfibers for efficient oil–water separation. J Mater Chem A 6:7457–7479. https://doi.org/10.1039/C7TA11260B

    Article  CAS  Google Scholar 

  25. Gore PM, Naebe M, Wang X, Kandasubramanian B (2019) Progress in silk materials for integrated water treatments: fabrication, modification and applications. Chem Eng J 374:437–470. https://doi.org/10.1016/j.cej.2019.05.163

    Article  Google Scholar 

  26. Gore PM, Dhanshetty M, Balasubramanian K (2016) Bionic creation of nano-engineered Janus fabric for selective oil/organic solvent absorption. RSC Adv 6:111250–111260. https://doi.org/10.1039/C6RA24106A

    Article  CAS  Google Scholar 

  27. Bal LM, Satya S, Naik SN (2010) Solar dryer with thermal energy storage systems for drying agricultural food products: a review. Renew Sustain Energy Rev 14:2298–2314. https://doi.org/10.1016/j.rser.2010.04.014

    Article  Google Scholar 

  28. Sarbu I, Sebarchievici C (2018) A comprehensive review of thermal energy storage. Sustainability 10:191. https://doi.org/10.3390/su10010191

    Article  CAS  Google Scholar 

  29. Chen H, Cong TN, Yang W et al (2009) Progress in electrical energy storage system: a critical review. Prog Nat Sci 19:291–312

    Article  CAS  Google Scholar 

  30. Ward PA, Teprovich JA, Liu Y et al (2018) High temperature thermal energy storage in the CaAl2 system. J Alloys Compd 735:2611–2615. https://doi.org/10.1016/j.jallcom.2017.10.191

    Article  CAS  Google Scholar 

  31. Herrmann U, Kelly B, Price H (2004) Two-tank molten salt storage for parabolic trough solar power plants. Energy 29:883–893. https://doi.org/10.1016/S0360-5442(03)00193-2

    Article  CAS  Google Scholar 

  32. Robinson A (2018) Ultra-high temperature thermal energy storage. Part 2: engineering and operation. J Energy Storage 18:333–339. https://doi.org/10.1016/j.est.2018.03.013

    Article  Google Scholar 

  33. Robinson A (2017) Ultra-high temperature thermal energy storage. Part 1: concepts. J Energy Storage 13:277–286. https://doi.org/10.1016/j.est.2017.07.020

    Article  Google Scholar 

  34. Elliott DE, Stephens T, Barabas MF et al (1977) High temperature thermal energy storage. Energy 2(1):59–69. https://doi.org/10.1016/0360-5442(77)90022-6

    Article  Google Scholar 

  35. Jordan S (2008) S104 Book 3 energy and light. In: Energy and light. Open University, p 179

  36. (2013) Specific heat capacity-Science and engineering encyclopedia. diracdelta.co.uk. https://web.archive.org/web/20070804192935/http://www.diracdelta.co.uk/science/source/s/p/specific%20heat%20capacity/source.html. Accessed 30 Dec 2019

  37. Ge H, Li H, Mei S, Liu J (2013) Low melting point liquid metal as a new class of phase change material: an emerging frontier in energy area. Renew Sustain Energy Rev 21:331–346. https://doi.org/10.1016/j.rser.2013.01.008

    Article  CAS  Google Scholar 

  38. (2018) Ethanol-Thermophysical properties, The Engineering ToolBox. https://www.engineeringtoolbox.com/ethanol-ethyl-alcohol-properties-C2H6O-d_2027.html. Accessed 30 Dec 2019

  39. Fernandez AI, Martínez M, Segarra M et al (2010) Selection of materials with potential in sensible thermal energy storage. Sol Energy Mater Sol Cells 94:1723–1729. https://doi.org/10.1016/j.solmat.2010.05.035

    Article  CAS  Google Scholar 

  40. Shukla A (2015) Latent heat storage through phase change materials. Resonance 20:532–541. https://doi.org/10.1007/s12045-015-0212-5

    Article  Google Scholar 

  41. Simpson RE, Fons P, Kolobov AV et al (2011) Interfacial phase-change memory. Nat Nanotechnol 6:501–505. https://doi.org/10.1038/nnano.2011.96

    Article  CAS  Google Scholar 

  42. Kousksou T, Bruel P, Jamil A et al (2014) Energy storage: applications and challenges. Sol Energy Mater Sol Cells 120:59–80. https://doi.org/10.1016/j.solmat.2013.08.015

    Article  CAS  Google Scholar 

  43. Bales C, Jähnig D, Kerskes H, Zondag H (2008) Store models for chemical and sorption storage units. Report B5—IEA SHC task 32

  44. Hauer A (2007) Sorption theory for thermal energy storage. In: Paksoy HÖ (ed) Thermal energy storage for sustainable energy consumption. Springer, Dordrecht, pp 393–408

    Chapter  Google Scholar 

  45. Weber R, Dorer V (2008) Long-term heat storage with NaOH. Vacuum 82:708–716. https://doi.org/10.1016/j.vacuum.2007.10.018

    Article  CAS  Google Scholar 

  46. Fujii I, Tsuchiya K, Higano M, Yamada J (1985) Studies of an energy storage system by use of the reversible chemical reaction: CaO + H2O ⇌ Ca(OH)2. Sol Energy 34:367–377. https://doi.org/10.1016/0038-092X(85)90049-0

    Article  CAS  Google Scholar 

  47. Pielichowska K, Pielichowski K (2014) Phase change materials for thermal energy storage. Prog Mater Sci 65:67–123. https://doi.org/10.1016/j.pmatsci.2014.03.005

    Article  CAS  Google Scholar 

  48. Farid MM, Khudhair AM, Razack SAK, Al-Hallaj S (2004) A review on phase change energy storage: materials and applications. Energy Convers Manag 45:1597–1615. https://doi.org/10.1016/j.enconman.2003.09.015

    Article  CAS  Google Scholar 

  49. Tyagi VV, Buddhi D (2007) PCM thermal storage in buildings: a state of art. Renew Sustain Energy Rev 11:1146–1166. https://doi.org/10.1016/j.rser.2005.10.002

    Article  Google Scholar 

  50. Prajapati DG, Kandasubramanian B (2019) Biodegradable polymeric solid framework-based organic phase-change materials for thermal energy storage. Ind Eng Chem Res. https://doi.org/10.1021/acs.iecr.9b01693

    Article  Google Scholar 

  51. Liu M, Saman W, Bruno F (2012) Review on storage materials and thermal performance enhancement techniques for high temperature phase change thermal storage systems. Renew Sustain Energy Rev 16:2118–2132. https://doi.org/10.1016/j.rser.2012.01.020

    Article  CAS  Google Scholar 

  52. Zhao J, Pan R, Sun R et al (2019) High-conductivity reduced-graphene-oxide/copper aerogel for energy storage. Nano Energy 60:760–767. https://doi.org/10.1016/j.nanoen.2019.04.023

    Article  CAS  Google Scholar 

  53. Ji Y, Wen H, Zhang K et al (2016) Enhancement of thermal conductivity of phase change materials by 3D graphene @ Al2O3 foams. In: 2016 17th international conference on electronic packaging technology, pp 313–317

  54. Zalba B, Marín JM, Cabeza LF, Mehling H (2003) Review on thermal energy storage with phase change: materials, heat transfer analysis and applications. Appl Therm Eng 23:251–283. https://doi.org/10.1016/S1359-4311(02)00192-8

    Article  CAS  Google Scholar 

  55. Tang YR, Gao DL, Guo YF et al (2011) Supercooling and phase separation of inorganic salt hydrates as PCMs. Appl Mech Mater 71–78:2602–2605. https://doi.org/10.4028/www.scientific.net/amm.71-78.2602

    Article  Google Scholar 

  56. Ryu HW, Woo SW, Shin BC, Kim SD (1992) Prevention of supercooling and stabilization of inorganic salt hydrates as latent heat storage materials. Sol Energy Mater Sol Cells 27:161–172. https://doi.org/10.1016/0927-0248(92)90117-8

    Article  CAS  Google Scholar 

  57. Biswas DR (1977) Thermal energy storage using sodium sulfate decahydrate and water. Sol Energy 19:99–100. https://doi.org/10.1016/0038-092X(77)90094-9

    Article  CAS  Google Scholar 

  58. Lane GA (1992) Phase change materials for energy storage nucleation to prevent supercooling. Sol Energy Mater Sol Cells 27:135–160

    Article  CAS  Google Scholar 

  59. Sharma RK, Ganesan P, Tyagi VV et al (2015) Developments in organic solid–liquid phase change materials and their applications in thermal energy storage. Energy Convers Manag 95:193–228. https://doi.org/10.1016/j.enconman.2015.01.084

    Article  CAS  Google Scholar 

  60. Paris J, Falardeau M, Villeneuve C (1993) Thermal storage by latent heat: a viable option for energy conservation in buildings. Energy Sources. https://doi.org/10.1080/00908319308909014

    Article  Google Scholar 

  61. Parks GS, West TJ, Naylor BF et al (1946) Thermal data on organic compounds. XXIII. Modern combustion data for fourteen hydrocarbons and five polyhydroxy alcohols. J Am Chem Soc. https://doi.org/10.1021/ja01216a028

    Article  Google Scholar 

  62. Parks GS, Moore GE, Renquist ML et al (1949) Thermal data on organic compounds. XXV. Some heat capacity, entropy and free energy data for nine hydrocarbons of high molecular weight. J Am Chem Soc. https://doi.org/10.1021/ja01178a034

    Article  Google Scholar 

  63. Lane GA (1983) Solar heat storage: latent heat materials. CRC Press, Michigan, p 0849365856

    Google Scholar 

  64. Fukai J, Hamada Y, Morozumi Y, Miyatake O (2002) Effect of carbon-fiber brushes on conductive heat transfer in phase change materials. Int J Heat Mass Transf 45:4781–4792. https://doi.org/10.1016/S0017-9310(02)00179-5

    Article  CAS  Google Scholar 

  65. Kaygusuz K, Sari A (2005) Thermal energy storage system using a technical grade paraffin wax as latent heat energy storage material. Energy Sources 27:1535–1546. https://doi.org/10.1080/009083190914015

    Article  CAS  Google Scholar 

  66. Ventolà L, Cuevas-Diarte MA, Calvet T et al (2005) Molecular alloys as phase change materials (MAPCM) for energy storage and thermal protection at temperatures from 70 to 85 °C. J Phys Chem Solids 66:1668–1674. https://doi.org/10.1016/j.jpcs.2005.06.001

    Article  CAS  Google Scholar 

  67. Ventolà L, Calvet T, Cuevas-Diarte MÁ et al (2002) From concept to application. A new phase change material for thermal protection at − 11 °C. Mater Res Innov 6:284–290. https://doi.org/10.1007/s10019-002-0213-3

    Article  CAS  Google Scholar 

  68. Zhang Z, Fang X (2006) Study on paraffin/expanded graphite composite phase change thermal energy storage material. Energy Convers Manag 47:303–310. https://doi.org/10.1016/j.enconman.2005.03.004

    Article  CAS  Google Scholar 

  69. Zhang Z, Zhang N, Peng J et al (2012) Preparation and thermal energy storage properties of paraffin/expanded graphite composite phase change material. Appl Energy 91:426–431. https://doi.org/10.1016/j.apenergy.2011.10.014

    Article  CAS  Google Scholar 

  70. Sarier N, Onder E, Ozay S, Ozkilic Y (2011) Preparation of phase change material-montmorillonite composites suitable for thermal energy storage. Thermochim Acta 524:39–46. https://doi.org/10.1016/j.tca.2011.06.009

    Article  CAS  Google Scholar 

  71. Ma T, Li L, Wang Q, Guo C (2019) High-performance flame retarded paraffin/epoxy resin form-stable phase change material. J Mater Sci 54:875–885. https://doi.org/10.1007/s10853-018-2846-7

    Article  CAS  Google Scholar 

  72. Horpan MS, Şahan N, Paksoy H et al (2019) Direct impregnation and characterization of Colemanite/Ulexite–Mg(OH)2 paraffin based form-stable phase change composites. Sol Energy Mater Sol Cells 195:346–352. https://doi.org/10.1016/j.solmat.2019.03.018

    Article  CAS  Google Scholar 

  73. Pielichowski K, Flejtuch K (2003) Differential scanning calorimetry study of blends of poly(ethylene glycol) with selected fatty acids. Macromol Mater Eng 288:259–264. https://doi.org/10.1002/mame.200390022

    Article  CAS  Google Scholar 

  74. Wen R, Zhang X, Huang Y et al (2017) Preparation and properties of fatty acid eutectics/expanded perlite and expanded vermiculite shape-stabilized materials for thermal energy storage in buildings. Energy Build 139:197–204. https://doi.org/10.1016/j.enbuild.2017.01.025

    Article  Google Scholar 

  75. Kahwaji S, Johnson MB, Kheirabadi AC et al (2017) Fatty acids and related phase change materials for reliable thermal energy storage at moderate temperatures. Sol Energy Mater Sol Cells 167:109–120. https://doi.org/10.1016/j.solmat.2017.03.038

    Article  CAS  Google Scholar 

  76. Solé A, Neumann H, Niedermaier S et al (2014) Stability of sugar alcohols as PCM for thermal energy storage. Sol Energy Mater Sol Cells 126:125–134. https://doi.org/10.1016/j.solmat.2014.03.020

    Article  CAS  Google Scholar 

  77. del Barrio EP, Godin A, Duquesne M et al (2017) Characterization of different sugar alcohols as phase change materials for thermal energy storage applications. Sol Energy Mater Sol Cells 159:560–569. https://doi.org/10.1016/j.solmat.2016.10.009

    Article  CAS  Google Scholar 

  78. Gunasekara SN, Pan R, Chiu JN, Martin V (2016) Polyols as phase change materials for surplus thermal energy storage. Appl Energy 162:1439–1452. https://doi.org/10.1016/j.apenergy.2015.03.064

    Article  CAS  Google Scholar 

  79. Huang X, Lin Y, Alva G, Fang G (2017) Thermal properties and thermal conductivity enhancement of composite phase change materials using myristyl alcohol/metal foam for solar thermal storage. Sol Energy Mater Sol Cells 170:68–76. https://doi.org/10.1016/j.solmat.2017.05.059

    Article  CAS  Google Scholar 

  80. Kakiuchi H, Yamazaki M, Yabe M et al (1998) A Study of erythritol as phase change material. IEA Annex 10 – PCMs and Chemical Reactions for Thermal Energy Storage, 2nd Workshop, Sofia, Bulgaria, 11–13 November 1998

  81. Barone G, Della Gatta G, Ferro D, Piacente V (1990) Enthalpies and entropies of sublimation, vaporization and fusion of nine polyhydric alcohols. J Chem Soc Faraday Trans 86:75–79. https://doi.org/10.1039/FT9908600075

    Article  CAS  Google Scholar 

  82. Talja RA, Roos YH (2001) Phase and state transition effects on dielectric, mechanical, and thermal properties of polyols. Thermochim Acta 380:109–121. https://doi.org/10.1016/S0040-6031(01)00664-5

    Article  CAS  Google Scholar 

  83. Zeng JL, Cao Z, Yang DW et al (2009) Phase diagram of palmitic acid-tetradecanol mixtures obtained by DSC experiments. J Therm Anal Calorim 95:501–505. https://doi.org/10.1007/s10973-008-9274-x

    Article  CAS  Google Scholar 

  84. Mrmak N (2014) Graphene properties-Graphene-Battery.net. http://www.graphene-battery.net/graphene-properties.htm. Accessed 30 Dec 2019

  85. Zhong Y, Zhou M, Huang F et al (2013) Effect of graphene aerogel on thermal behavior of phase change materials for thermal management. Sol Energy Mater Sol Cells 113:195–200. https://doi.org/10.1016/j.solmat.2013.01.046

    Article  CAS  Google Scholar 

  86. Ye S, Zhang Q, Hu D, Feng J (2015) Core–shell-like structured graphene aerogel encapsulating paraffin: shape-stable phase change material for thermal energy storage. J Mater Chem A 3:4018–4025. https://doi.org/10.1039/c4ta05448b

    Article  CAS  Google Scholar 

  87. Sheng K, Sun Y, Li C et al (2012) Ultrahigh-rate supercapacitors based on eletrochemically reduced graphene oxide for ac line-filtering. Sci Rep 2:247. https://doi.org/10.1038/srep00247

    Article  CAS  Google Scholar 

  88. Chen K, Chen L, Chen Y et al (2012) Three-dimensional porous graphene-based composite materials: electrochemical synthesis and application. J Mater Chem 22:20968. https://doi.org/10.1039/c2jm34816k

    Article  CAS  Google Scholar 

  89. Pham HD, Pham VH, Cuong TV et al (2011) Synthesis of the chemically converted graphene xerogel with superior electrical conductivity. Chem Commun 47:9672. https://doi.org/10.1039/c1cc13329b

    Article  CAS  Google Scholar 

  90. Worsley MA, Pauzauskie PJ, Olson TY et al (2010) Synthesis of graphene aerogel with high electrical conductivity. J Am Chem Soc 132:14067–14069. https://doi.org/10.1021/ja1072299

    Article  CAS  Google Scholar 

  91. Yang J, Qi GQ, Bao RY et al (2018) Hybridizing graphene aerogel into three-dimensional graphene foam for high-performance composite phase change materials. Energy Storage Mater 13:88–95. https://doi.org/10.1016/j.ensm.2017.12.028

    Article  Google Scholar 

  92. Ji H, Sellan DP, Pettes MT et al (2014) Enhanced thermal conductivity of phase change materials with ultrathin-graphite foams for thermal energy storage. Energy Environ Sci 7:1185–1192. https://doi.org/10.1039/c3ee42573h

    Article  CAS  Google Scholar 

  93. Xin G, Sun H, Scott SM et al (2014) Advanced phase change composite by thermally annealed defect-free graphene for thermal energy storage. ACS Appl Mater Interfaces. https://doi.org/10.1021/am503619a

    Article  Google Scholar 

  94. Jain V, Kandasubramanian B (2020) Functionalized graphene materials for hydrogen storage. J Mater Sci 55:1865–1903. https://doi.org/10.1007/s10853-019-04150-y

    Article  CAS  Google Scholar 

  95. Shi JN, Der Ger M, Liu YM et al (2013) Improving the thermal conductivity and shape-stabilization of phase change materials using nanographite additives. Carbon N Y. https://doi.org/10.1016/j.carbon.2012.08.068

    Article  Google Scholar 

  96. Xu T, Li Y, Chen J et al (2018) Improving thermal management of electronic apparatus with paraffin (PA)/expanded graphite (EG)/graphene (GN) composite material. Appl Therm Eng 140:13–22. https://doi.org/10.1016/j.applthermaleng.2018.05.060

    Article  CAS  Google Scholar 

  97. Bin YuC, Yang SH, Pak SY et al (2018) Graphene embedded form stable phase change materials for drawing the thermo-electric energy harvesting. Energy Convers Manag 169:88–96. https://doi.org/10.1016/j.enconman.2018.05.001

    Article  CAS  Google Scholar 

  98. Bhalara PD, Balasubramanian K, Banerjee BS (2015) Spider–web textured electrospun composite of graphene for sorption of Hg(II) ions. Mater Focus 4:154–163. https://doi.org/10.1166/mat.2015.1232

    Article  CAS  Google Scholar 

  99. Thakur K, Kandasubramanian B (2019) Graphene and graphene oxide-based composites for removal of organic pollutants: a review. J Chem Eng Data 64:833–867. https://doi.org/10.1021/acs.jced.8b01057

    Article  CAS  Google Scholar 

  100. Joshi A, Bajaj A, Singh R et al (2013) Graphene nanoribbon–PVA composite as EMI shielding material in the X band. Nanotechnology 24:455705. https://doi.org/10.1088/0957-4484/24/45/455705

    Article  CAS  Google Scholar 

  101. Yadav R, Subhash A, Chemmenchery N, Kandasubramanian B (2018) Graphene and graphene oxide for fuel cell technology. Ind Eng Chem Res 57:9333–9350. https://doi.org/10.1021/acs.iecr.8b02326

    Article  CAS  Google Scholar 

  102. Sahoo BN, Kandasubramanian B (2014) Photoluminescent carbon soot particles derived from controlled combustion of camphor for superhydrophobic applications. RSC Adv 4:11331–11342. https://doi.org/10.1039/c3ra46193a

    Article  CAS  Google Scholar 

  103. Shang Y, Zhang D (2016) Preparation and thermal properties of graphene oxide–microencapsulated phase change materials. Nanoscale Microscale Thermophys Eng 20:147–157. https://doi.org/10.1080/15567265.2016.1236865

    Article  CAS  Google Scholar 

  104. Yang J, Tang LS, Bao RY et al (2018) Hybrid network structure of boron nitride and graphene oxide in shape-stabilized composite phase change materials with enhanced thermal conductivity and light-to-electric energy conversion capability. Sol Energy Mater Sol Cells 174:56–64. https://doi.org/10.1016/j.solmat.2017.08.025

    Article  CAS  Google Scholar 

  105. Qi GQ, Yang J, Bao RY et al (2015) Enhanced comprehensive performance of polyethylene glycol based phase change material with hybrid graphene nanomaterials for thermal energy storage. Carbon N Y 88:196–205. https://doi.org/10.1016/j.carbon.2015.03.009

    Article  CAS  Google Scholar 

  106. Palaniappan N, Cole IS, Kuznetsov AE et al (2019) Experimental and computational studies of a graphene oxide barrier layer covalently functionalized with amino acids on Mg AZ13 alloy in salt medium. RSC Adv 9:32441–32447. https://doi.org/10.1039/C9RA06549K

    Article  CAS  Google Scholar 

  107. Palaniappan N, Cole IS, Caballero-Briones F et al (2018) Praseodymium-decorated graphene oxide as a corrosion inhibitor in acidic media for the magnesium AZ31 alloy. RSC Adv 8:34275–34286. https://doi.org/10.1039/C8RA05118F

    Article  CAS  Google Scholar 

  108. Kant K, Shukla A, Sharma A, Henry Biwole P (2017) Heat transfer study of phase change materials with graphene nano particle for thermal energy storage. Sol Energy 146:453–463. https://doi.org/10.1016/j.solener.2017.03.013

    Article  CAS  Google Scholar 

  109. Jing G, Dehong X, Li W et al (2018) Low concentration graphene nanoplatelets for shape stabilization and thermal transfer reinforcement of Mannitol: a phase change material for a medium-temperature thermal energy system. Mater Res Express. https://doi.org/10.1088/2053-1591/aaaf59

    Article  Google Scholar 

  110. Qi G, Yang J, Bao R et al (2017) Hierarchical graphene foam-based phase change materials with enhanced thermal conductivity and shape stability for efficient solar-to-thermal energy conversion and storage. Nano Res 10:802–813. https://doi.org/10.1007/s12274-016-1333-1

    Article  CAS  Google Scholar 

  111. Kim J, Ou E, Kholmanov I et al (2015) Continuous carbon nanotube–ultrathin graphite hybrid foams for increased thermal conductivity and suppressed subcooling in composite phase change materials. ACS Nano 9:11699–11707. https://doi.org/10.1021/acsnano.5b02917

    Article  CAS  Google Scholar 

  112. Liu K-K, Jin B, Meng L-Y (2018) Glucose/graphene-based aerogels for gas adsorption and electric double layer capacitors. Polymers 11:40. https://doi.org/10.3390/polym11010040

    Article  CAS  Google Scholar 

  113. Liu L, Zheng K, Yan Y et al (2018) Graphene aerogels enhanced phase change materials prepared by one-pot method with high thermal conductivity and large latent energy storage. Sol Energy Mater Sol Cells 185:487–493. https://doi.org/10.1016/j.solmat.2018.06.005

    Article  CAS  Google Scholar 

  114. Qu Y, Lu C, Su Y et al (2018) Hierarchical-graphene-coupled polyaniline aerogels for electrochemical energy storage. Carbon N Y 127:77–84. https://doi.org/10.1016/j.carbon.2017.10.088

    Article  CAS  Google Scholar 

  115. (2013) Ultra-light aerogel produced at a Zhejiang University Lab-Press releases-Zhejiang University

  116. Hu H, Zhao Z, Wan W et al (2013) Ultralight and highly compressible graphene aerogels. Adv Mater 25:2219–2223. https://doi.org/10.1002/adma.201204530

    Article  CAS  Google Scholar 

  117. McNaught AD, Wilkinson A (2006) Aerogel. In: IUPAC Compendium of Chemical Terminology. IUPAC, Research Triangle Park

  118. Shang J-J, Yang Q-S, Liu X (2017) New coarse-grained model and its implementation in simulations of graphene assemblies. J Chem Theory Comput 13:3706–3714. https://doi.org/10.1021/acs.jctc.7b00051

    Article  CAS  Google Scholar 

  119. Cheng Y, Zhou S, Hu P et al (2017) Enhanced mechanical, thermal, and electric properties of graphene aerogels via supercritical ethanol drying and high-temperature thermal reduction. Sci Rep 7:1439. https://doi.org/10.1038/s41598-017-01601-x

    Article  CAS  Google Scholar 

  120. Marcano DC, Kosynkin DV, Berlin JM et al (2010) Improved synthesis of graphene oxide. ACS Nano. https://doi.org/10.1021/nn1006368

    Article  Google Scholar 

  121. Li Y, Chen J, Huang L et al (2014) Highly compressible macroporous graphene monoliths via an improved hydrothermal process. Adv Mater 26:4789–4793. https://doi.org/10.1002/adma.201400657

    Article  CAS  Google Scholar 

  122. Yang J, Qi GQ, Liu Y et al (2016) Hybrid graphene aerogels/phase change material composites: thermal conductivity, shape-stabilization and light-to-thermal energy storage. Carbon N Y 100:693–702. https://doi.org/10.1016/j.carbon.2016.01.063

    Article  CAS  Google Scholar 

  123. Tian B, Yang W, He F et al (2017) Paraffin/carbon aerogel phase change materials with high enthalpy and thermal conductivity. Fuller Nanotub Carbon Nanostructures 25:512–518. https://doi.org/10.1080/1536383X.2017.1347638

    Article  CAS  Google Scholar 

  124. Tang LS, Yang J, Bao RY et al (2017) Polyethylene glycol/graphene oxide aerogel shape-stabilized phase change materials for photo-to-thermal energy conversion and storage via tuning the oxidation degree of graphene oxide. Energy Convers Manag 146:253–264. https://doi.org/10.1016/j.enconman.2017.05.037

    Article  CAS  Google Scholar 

  125. Xiang J, Drzal LT (2011) Investigation of exfoliated graphite nanoplatelets (xGnP) in improving thermal conductivity of paraffin wax-based phase change material. Sol Energy Mater Sol Cells. https://doi.org/10.1016/j.solmat.2011.01.048

    Article  Google Scholar 

  126. Xu Y, Fleischer AS, Feng G (2017) Reinforcement and shape stabilization of phase-change material via graphene oxide aerogel. Carbon N Y 114:334–346. https://doi.org/10.1016/j.carbon.2016.11.069

    Article  CAS  Google Scholar 

  127. Fang X, Hao P, Song B et al (2017) Form-stable phase change material embedded with chitosan-derived carbon aerogel. Mater Lett 195:79–81. https://doi.org/10.1016/j.matlet.2017.02.075

    Article  CAS  Google Scholar 

  128. McNaught AD, Wilkinson A (2006) Foam. In: IUPAC compendium of chemical terminology. IUPAC, Research Triangle Park

  129. Paronyan TM, Thapa AK, Sherehiy A et al (2017) Incommensurate graphene foam as a high capacity lithium intercalation anode. Sci Rep 7:1–11. https://doi.org/10.1038/srep39944

    Article  CAS  Google Scholar 

  130. Pettes MT, Ji H, Ruoff RS, Shi L (2012) Thermal transport in three-dimensional foam architectures of few-layer graphene and ultrathin graphite. Nano Lett 12:2959–2964. https://doi.org/10.1021/nl300662q

    Article  CAS  Google Scholar 

  131. Shang Y, Zhang D (2017) Preparation and characterization of three-dimensional graphene network encapsulating 1-hexadecanol composite. Appl Therm Eng 111:353–357. https://doi.org/10.1016/j.applthermaleng.2016.09.129

    Article  CAS  Google Scholar 

  132. Abuşka M, Şevik S, Kayapunar A (2019) A comparative investigation of the effect of honeycomb core on the latent heat storage with PCM in solar air heater. Appl Therm Eng 148:684–693. https://doi.org/10.1016/j.applthermaleng.2018.11.056

    Article  Google Scholar 

  133. Mu B, Li M (2019) Synthesis of novel form-stable composite phase change materials with modified graphene aerogel for solar energy conversion and storage. Sol Energy Mater Sol Cells 191:466–475. https://doi.org/10.1016/j.solmat.2018.11.025

    Article  CAS  Google Scholar 

  134. Xue F, Lu Y, Qi XD et al (2019) Melamine foam-templated graphene nanoplatelet framework toward phase change materials with multiple energy conversion abilities. Chem Eng J 365:20–29. https://doi.org/10.1016/j.cej.2019.02.023

    Article  CAS  Google Scholar 

  135. Wang Z, Shen X, Akbari Garakani M et al (2015) Graphene aerogel/epoxy composites with exceptional anisotropic structure and properties. ACS Appl Mater Interfaces 7:5538–5549. https://doi.org/10.1021/acsami.5b00146

    Article  CAS  Google Scholar 

  136. Fan Z, Gong F, Nguyen ST, Duong HM (2015) Advanced multifunctional graphene aerogel—poly (methyl methacrylate) composites: experiments and modeling. Carbon N Y 81:396–404. https://doi.org/10.1016/j.carbon.2014.09.072

    Article  CAS  Google Scholar 

  137. Balasubramanian K (2012) Reinforcement of poly ether sulphones (PES) with exfoliated graphene oxide for aerospace applications. In: International conference on structural nano composites (NANOSTRUC 2012). Cranfield University, Bedfordshire

    Article  Google Scholar 

  138. Salimian S, Zadhoush A (2019) Water-glass based silica aerogel: unique nanostructured filler for epoxy nanocomposites. J Porous Mater 26:1755–1765. https://doi.org/10.1007/s10934-019-00757-3

    Article  CAS  Google Scholar 

  139. Chen WJ, Shen MY, Li YL et al (2010) Thermal and mechanical properties of carbon aerogels for nanocomposites. In: 7th Asian-Australasian conference on composite materials. Taipei, pp 1234–1238

  140. He J, Li X, Su D et al (2016) Ultra-low thermal conductivity and high strength of aerogels/fibrous ceramic composites. J Eur Ceram Soc 36:1487–1493. https://doi.org/10.1016/j.jeurceramsoc.2015.11.021

    Article  CAS  Google Scholar 

Download references

Acknowledgement

The authors are thankful to Dr. C. P. Ramanarayanan, Vice-Chancellor of Defence Institute of Advanced Technology (DU), Pune, for the motivation and support. The authors would like to thank Mr. Swaroop Gharde and Mr. Deepak Prajapati for technical discussion and support. The authors would also like to acknowledge Mr. Prakash Gore and Mr. Ravi Prakash Magisetty for their help with technical editing. The authors are also thankful to the editor and anonymous reviewers for improving the quality of the revised manuscript by their valuable comments and suggestions.

Author information

Authors and Affiliations

Authors

Corresponding author

Correspondence to Balasubramanian Kandasubramanian.

Additional information

Publisher's Note

Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.

Rights and permissions

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Kashyap, S., Kabra, S. & Kandasubramanian, B. Graphene aerogel-based phase changing composites for thermal energy storage systems. J Mater Sci 55, 4127–4156 (2020). https://doi.org/10.1007/s10853-019-04325-7

Download citation

  • Received:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s10853-019-04325-7

Navigation