Issue 6, 2020

Enhancing the coercivity of SmCo5 magnet through particle size control

Abstract

The SmCo5 rare-earth hard magnet has the largest anisotropy field among all known magnetic materials, 32 MA m−1 (400 kOe), while the obtainable coercivity (Hc) is usually less than 30% of the anisotropy field. The coercivity is enhanced when the grain size (spherical shape) is in the stable single-domain size (SSDS) range. Theoretical calculation predicts the SSDS range of SmCo5 to be 740–870 nm, however, at present, there has been no experimental data supporting this claim. Herein, we used a chemical method for tuning the average particle size (APS) of SmCo5 resulting in sizes ranging from 228 nm to 1191 nm. We find, that the morphology and composition of the precursor plays a decisive role in determining the composition and APS of the final product. A maximum coercivity of 2.6 MA m−1 (33.1 kOe) was obtained for an APS of 823 nm. SEM images and recoil loops demonstrate that samples with high coercivity are homogeneous and the demagnetization process happens simultaneously between multiple phases showing single-phase magnetic behavior. Henkel plots and δM plots verify the existing of strong exchange coupling interaction between particles, resulting in high Mr/Ms ratios. This is the first reported systematic optimization study of the coercivity of SmCo5 based on single-domain theory and the optimized APS matches remarkably well the predicted SSDS range.

Graphical abstract: Enhancing the coercivity of SmCo5 magnet through particle size control

Supplementary files

Article information

Article type
Paper
Submitted
09 Nov 2019
Accepted
06 Jan 2020
First published
07 Jan 2020

J. Mater. Chem. C, 2020,8, 2109-2116

Enhancing the coercivity of SmCo5 magnet through particle size control

H. Tang, M. A. H. Mamakhel and M. Christensen, J. Mater. Chem. C, 2020, 8, 2109 DOI: 10.1039/C9TC06137A

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements