Login Register Cart 0
Generic placeholder image

Recent Patents on Nanotechnology

Editor-in-Chief

ISSN (Print): 1872-2105
ISSN (Online): 2212-4020

Back
Journal Home About Journal Editorial Board Journal Insight Current Issue Volumes/Issues
Subscribe
Research Article

Bubble Electrospinning with an Auxiliary Electrode and an Auxiliary Air Flow

Author(s): Xiao-Xia Li and Ji-Huan He*

Volume 14, Issue 1, 2020

Page: [42 - 45] Pages: 4

DOI: 10.2174/1872210513666191107122528

Price: $65

Abstract

Background: The patented bubble electrospinning, which is a simple and effective technique for mass-production of polymer nanofibers, has been studying extensively, but it is still under development. In the bubble electrospinning, multiple jets move from the positive electrode to the receptor, a long distance between the two electrodes is needed to guarantee complete solvent evaporation, as a result a relative high voltage is needed.

Objective: The aim of the present study is to use an auxiliary electrode and an auxiliary air flow to improve bubble electrospinning with lower voltage and higher output than those by its traditional one.

Methods: The modification of the bubble electrospinning with an auxiliary electrode and an auxiliary airflow is used to fabricate nanofibers. The auxiliary electrode is close to the positive electrode. The experiment was carried out at room temperature with 8%PVA solution. The result was analyzed with a S4800 cold field scanning electron microscope (SEM, Hitachi S-4800, Tokyo, Japan).

Results: The auxiliary electrode can generate a strong induced electric field force. With the action of airflow, the jets will fly to the receptor instead of the auxiliary electrode.

Conclusion: Both auxiliary electrode and auxiliary airflow are two important factors affecting the spinning process. It can reduce the spinning voltage and improve spinning efficiency.

Keywords: Bubble electrospinning, auxiliary electrode, air flow, escape velocity, electric field force, nanofiber.

« Previous Next »
Graphical Abstract

[1]
Liu Y, He JH. Bubble electrospinning for mass production of nanofibers. Int J Nonlinear Sci Numer Simul 2007; 8(3): 393-6.
[http://dx.doi.org/10.1515/IJNSNS.2007.8.3.393]
[2]
He JH, Kong HY. Bubble electrospinning device CN Patent 203715800 (U). 2014.
[3]
He CH, Shen Y, Ji FY, et al. Taylor series solution for fractal Bratu-type equation arising in electrospinning process. Fractals 2020; 28(1) 2050011
[http://dx.doi.org/10.1142/S0218348X20500115]
[4]
He JH. An elementary introduction to recently developed asymptotic methods and nanomechanics in textile engineering. Int J Mod Phys B 2008; 22(21): 3487-578.
[http://dx.doi.org/10.1142/S0217979208048668]
[5]
Liu Y, He JH. Bubble electrospinning for mass production of nanofibers. Int J Nonlinear Sci Numer Simul 2007; 8(3): 393-6.
[http://dx.doi.org/10.1515/IJNSNS.2007.8.3.393]
[6]
Yu DN, Tian D, He JH. Snail-based nanofibers. Mater Lett 2018; 220: 5-7.
[http://dx.doi.org/10.1016/j.matlet.2018.02.076]
[7]
Liu YQ, Zhao L, He JH. Nanoscale multi-phase flow and its application to control nanofiber diameter. Therm Sci 2018; 22(1A): 43-6.
[http://dx.doi.org/10.2298/TSCI160826148L]
[8]
Tian D, Li XX, He JH. Self-assembly of macromolecules in a long and narrow tube. Therm Sci 2018; 22(4): 1659-64.
[http://dx.doi.org/10.2298/TSCI1804659T]
[9]
Liu YQ, Feng JW, Zhang CC, et al. Air permeability of nanofiber membrane with hierarchical structure. Therm Sci 2018; 22(4): 1637-43.
[http://dx.doi.org/10.2298/TSCI1804637L]
[10]
Tian D, Zhou C-J, He J-H. Strength of bubble walls and the Hall–Petch effect in bubble-spinning. Text Res J 2018; 89(7) 004051751877067
[http://dx.doi.org/10.1177/0040517518770679]
[11]
Sun QL, Sun L, Wang XW, et al. Nanoscale multi-phase flow and its application to control nanofiber diameter. Therm Sci 2018; 22(1A): 47-50.
[http://dx.doi.org/10.2298/TSCI151202149S]
[12]
Wang FY, He JH, Sun QL, et al. Improvement of air permeability of Bubbfil nanofiber membrane. Therm Sci 2018; 22(1A): 17-21.
[http://dx.doi.org/10.2298/TSCI160715142W]
[13]
Liu P, He JH. Geometrical potential: an explanation on of nanofibers wettability. Therm Sci 2018; 22(1A): 33-8.
[http://dx.doi.org/10.2298/TSCI160706146L]
[14]
He JH, Kong HY, Yang RR, et al. Review on fiber morphology obtained by the bubble electrospinning and blown bubble spinning. Therm Sci 2012; 16: 1263-79.
[http://dx.doi.org/10.2298/TSCI1205263H]
[15]
Zhao L, Liu P, He JH. Sudden solvent evaporation in bubble electrospinning for fabrication of unsmooth nanofibers. Therm Sci 2017; 21(4): 1827-32.
[http://dx.doi.org/10.2298/TSCI160725075Z]
[16]
Liu LG, He JH. Solvent evaporation in a binary solvent system for controllable fabrication of porous fibers by electrospinning. Therm Sci 2017; 21: 1821-5.
[http://dx.doi.org/10.2298/TSCI160928074L]
[17]
He JH, Sun C. A variational principle for a thin film equation. J of Math Chem 2019; 57(9)(2019): 2075-81.
[http://dx.doi.org/10.1007/s10910-019-01063-8]
[18]
He JH. A modified Li-He’s variational principle for plasma. Int J Numeric Met Heat Fluid Flow 2019.
[http://dx.doi.org/10.1108/HFF-06-2019-0523]
[19]
He JH. Lagrange Crisis and Generalized Variational Principle for 3D unsteady flow. Int J Numeric Met Heat Fluid Flow 2019.
[http://dx.doi.org/10.1108/HFF-07-2019-0577]
[20]
He JH. Generalized Variational Principles for Buckling Analysis of Circular Cylinders. Acta Mech 2019.
[http://dx.doi.org/10.1007/s00707-019-02569-7]
[21]
He JH. A fractal variational theory for one-dimensional compressible flow in a microgravity space. Fractals 2019.
[http://dx.doi.org/10.1142/S0218348X20500243]

Rights & Permissions Print Cite
Article Metrics
28
© 2024 Bentham Science Publishers | Privacy Policy