Skip to main content

Are there benefits from using bone-borne maxillary expansion instead of tooth-borne maxillary expansion? A systematic review with meta-analysis

Abstract

Background

The aim of the current systematic review was to compare the clinical effects of bone-borne or hybrid tooth-bone-borne rapid maxillary expansion (RME) with conventional tooth-borne RME in the treatment of maxillary deficiency.

Methods

Nine databases were searched up to September 2018 for randomized clinical trials comparing bone-borne or hybrid tooth-bone-borne RME to conventional tooth-borne RME in patients of any age or sex. After duplicate study selection, data extraction, and risk of bias assessment with the Cochrane tool, random effects meta-analyses of mean differences (MD) and their 95% confidence intervals (CIs) were performed, followed by assessment of the quality of evidence with GRADE.

Results

A total of 12 papers on 6 unique trials with 264 patients (42.4% male; average age 12.3 years) were finally included. Limited evidence indicated that bone-borne RME was associated with greater suture opening at the first molar post-retention (1 trial; MD 2.0 mm; 95% CI 1.4 to 2.6 mm; moderate evidence quality) compared to tooth-borne RME, while no significant differences could be found regarding tooth inclination, nasal cavity width, and root resorption (very low to low evidence quality). Hybrid tooth-bone-borne RME was associated with less buccal tipping of the first premolar (2 trials; MD − 4.0°; 95% CI − 0.9 to − 7.1°; moderate evidence quality) and lower nasal airway resistance post-retention (1 trial; MD − 0.2 Pa s/cm3; 95% CI − 0.4 to 0 Pa s/cm3; moderate evidence quality) compared to tooth-borne RME, while no significant difference could be found regarding skeletal maxillary width, molar inclination, and analgesic use (low to moderate evidence quality). The main limitations affecting the validity of the present findings were (a) imprecision due to the inclusion of few trials with limited sample sizes that precluded robust detection of existing differences and (b) methodological issues of the included trials that could lead to bias.

Conclusions

Limited evidence from randomized trials indicates that bone-borne or hybrid tooth-bone-borne RME might present advantages in terms of increased sutural opening, reduced tooth tipping, and lower nasal airway resistance compared to conventional tooth-borne RME. However, the limited number of existing studies and issues in their conduct or reporting preclude the drawing of definite conclusions.

Review registration

PROSPERO (CRD42017079107).

Introduction

Transverse maxillary deficiency is a malocclusion seen among adolescents or adults with prevalence over 8–10% [1, 2] and can manifest clinically as unilateral or bilateral crossbite, narrow nasal cavity, arch length discrepancy, and crowding [3, 4]. Additionally, some evidence indicates that posterior crossbites might be associated with temporomandibular disorders, including clicking and muscle tenderness [5]. Therefore, transverse maxillary deficiencies are usually treated on diagnosis to enable the settling of a harmonic occlusion, while avoiding any potential side effects.

In the treatment of transverse maxillary deficiencies, especially among adolescents, orthopedic expansion of the maxilla along the median palatal suture holds a prominent place [6]. This usually follows the protocol of a rapid maxillary expansion (RME), where the palatal expander is fixed on the maxillary posterior teeth. RME using tooth-borne expanders has been shown to be an effective alternative for the treatment of maxillary transverse deficiency [7] among adolescents, with treatment effects including an expansion of the maxillary arch (being mostly dental and less skeletal [8, 9]), widening of the nasal cavity [10], anterior movement of the maxilla [11] with a downward rotation [12], and a small spontaneous increase in mandibular arch width [9]. On the other side, tooth-anchored RME has also been associated with some adverse effects to the teeth and the surrounding tissues, including among others, buccal tooth tipping [11], reduced buccal bone thickness [13], marginal bone loss [13], bone fenestration [14], buccal gingival recessions [15], and root resorption [16].

In order to overcome these potential limitations and possibly enhance the skeletal effects of conventional tooth-borne RME, the use of an RME anchored completely or partly on skeletal anchorage devices was proposed [17], designated as bone-borne or hybrid (tooth-bone-borne) RME, respectively. The suggested benefits of such appliances include greater skeletal expansion of the maxilla and facial bones, reduced burden and adverse effects on the anchorage teeth, and improved stability of the results. These benefits come of course at the cost of increased invasiveness of the procedure and increased risk of wound infection [18].

Even though research on this field continues to increase, clinical evidence about the comparative performance of skeletally anchored RME has not been systematically and critically appraised. Therefore, the aim of the present systematic review was to compare the efficacy and adverse effects of partially/completely skeletally anchored RME versus conventional (tooth-borne) RME for the treatment of maxillary transverse deficiency based on evidence from randomized clinical trials.

Material and methods

Protocol, eligibility criteria, and registration

This review’s protocol was made a priori, registered in PROSPERO (CRD42017079107), and all post hoc changes were appropriately noted. This systematic review was conducted and reported according to Cochrane Handbook [19] and Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) statement [20], respectively.

Based on the Participants-Interventions-Comparisons-Outcome-Study design (PICOS) approach, we included randomized controlled clinical trials on human patients of any age or sex with transverse maxillary deficiency treated with bone-borne compared to tooth-borne maxillary expansion in terms of skeletal expansion as the primary outcome. Two discreet experimental interventions were considered eligible and compared with the conventional tooth-borne RME control: purely bone-borne RME, as well as hybrid tooth-bone-borne RME. Non-randomized studies, animal studies, in vitro studies, and studies, where RME was surgically assisted, were excluded.

Information sources and literature search

The following nine electronic databases were systematically searched for this review: MEDLINE (via PubMed), Embase, The Cochrane Library (CDSR, CENTRAL, and DARE), Virtual Health Library (including Bibliography Brazilian Dentistry and LILACS), Scopus, ISI Web of Knowledge, and ClinicalTrials.gov (Additional file 1: Appendix 1). Manual searches were applied on the databases Directory of Open Access Journals (DOAJ), Digital Dissertations (via UMI Proquest), metaRegister of Controlled Trials, WHO trials search portal, and Google Scholar for additional trials as well as for the reference lists of the included studies. The entire search was made by one author (SNP) without any limitations from inception of each database up to September 29, 2018. Aside from filtering trials on humans, no other filters for language, publications year, and status were applied.

Study selection and data collection

The identified studies from the literature search were sequentially screened by title, abstract, and full text by one author (MK) with subsequent duplicate independent checking against the eligibility criteria by another author (SNP), while conflicts were resolved by a third author (TE).

The same protocol was applied for the extraction of study characteristics (study design, setting, country, patient number, sex, age, appliances, treatment duration, timing of follow-up, activation protocol, measurement method, and outcome measured) and for the numerical data collection using pre-defined forms. Piloting of the forms was performed during the protocol stage until over 90% agreement was reached. When any data was missing in the trial, it was calculated from existing data or the corresponding author was contacted.

Risk of bias in individual studies

The risk of bias within the individual included randomized studies was evaluated using the Cochrane risk of bias tool [19]. This assessment was performed by one author (MK) and independently checked by another author (SNP).

Data synthesis

The primary outcome of this systematic review was the difference in the achieved amount of skeletal maxillary expansion between bone-borne or hybrid tooth-bone-borne RME and conventional tooth-borne RME. Secondary outcomes included dental positional/inclination changes, other skeletal changes, root resorption, structural/functional airway measurements, and patient-reported outcomes.

Data were summarized and considered suitable for pooling, if similar intervention and/or control groups were compared and if similar outcomes were reported. All existing trials were included in the analysis independently of reporting completeness, if possible; where data was missing, they were calculated from existing data or requested them from the authors. For studies reporting on data before and after treatment, but not on the treatment-induced changes, we calculated those with a moderate pre-post correlation of 0.75.

Mean differences (MDs) of treatment changes for continuous outcomes and relative risks (RRs) for binary outcomes and their corresponding 95% confidence intervals (CIs) were calculated. The standardized mean difference was also chosen post hoc to combine two similar measurements of nasal cavity width into a single meta-analysis (Additional file 1: Appendix 2). As the effects of RME were deemed to be highly variable according to patient age, sex, and individual variation of the maxillofacial sutures, a random effects model was chosen over a fixed effect one to calculate the average distribution of treatment effects that can be expected [21]. A REstricted Maximum Likelihood (REML) random effects variance estimator was used instead of the older DerSimonian-Laird one, following recent guidance [22]. Random effects 95% predictions were calculated for meta-analyses with at least three studies to aid in their interpretation by quantifying expected treatment effects in a future clinical setting [23].

The extent and impact of between-study heterogeneity were assessed by inspecting the forest plots and by calculating the tau-squared and the I-squared statistics, respectively. The 95% CIs (uncertainty intervals) around tau-squared and I-squared were calculated to judge our confidence about these metrics. We arbitrarily adopted the I-squared thresholds of > 75% to be considered as signs of considerable heterogeneity, but we also judged the evidence for this heterogeneity (through the uncertainty intervals) and the localization on the forest plot.

A two-tailed P value of 0.05 was considered significant for all hypothesis testing, except for a 0.10 used for the test of heterogeneity and reporting biases. All analyses were run in Stata SE 14.0 (StataCorp, College Station, TX) by one author (SNP), and the study’s dataset was openly provided [24].

Risk of bias across studies and additional analyses

Subgroup analyses, meta-regressions, assessments of reporting biases, and sensitivity analyses were initially planned in the review’s protocol, but could ultimately not be conducted due to limited number of included trials (Additional file 1: Appendix 2).

The overall quality of clinical recommendations (confidence in effects estimates) for each of the main outcomes was rated by using the Grades of Recommendation, Assessment, Development, and Evaluation (GRADE) approach [25] using an improved summary of findings table format [26]. The optimal information size was estimated for each outcome independently to be able to identify a minimal clinical important effect with an average standard deviation (based on this review’s study sample), with type I and type II errors set at 5% and 20%, respectively. The minimal clinical important, large, and very large effects were conventionally defined as half, one, and two standard deviations for continuous outcomes [27] and as relative risks of 1.5, 2.5, or 5.0 for binary outcomes [28]. This assessment of the risk of bias for among trials was conducted independently by two authors (SNP and MK), and discrepancies were resolved by discussion with a third author (TE).

Results

Study selection

The electronic literature yielded a total of 622 records, while 3 more were identified manually (Fig. 1). After removal of duplicates and screening of titles and abstracts, 113 full-text papers were scrutinized against the eligibility criteria. After applying the eligibility criteria, a total of 12 publications pertaining to six unique RCTs were finally included in this systematic review (Additional file 1: Appendix 3).

Fig. 1
figure 1

PRISMA flow diagram for identification and selection of eligible trials

Study characteristics

The six included RCTs were conducted in clinics, private practices, or university clinics in four different countries (Canada, Netherlands, Sweden, Turkey) and had been published as journal papers and/or dissertations in English between 2009 and 2018 (Table 1). As far as experimental groups are concerned, two trials included a pure bone-borne RME, three included a hybrid tooth-bone-borne RME, and one included both. The different designs of RME appliances used can be seen in Additional file 1: Appendix 4. As far as control groups are concerned, all six trials included a conventional tooth-borne RME, while one trial also included an untreated control group that was disregarded, as it fell outside the scope of this review. These six trials included a total of 264 patients randomized into experimental or control groups with an average group size of 19 patients. From these 264 patients, 112 (42.4%) were male and the average age across trials was 12.3 years. All trials used similar RME activation protocols, which included 2 turns of the expansion screw per day until (over-)correction of the maxillary deficit.

Table 1 Characteristics of included randomized trials pertaining to setting, patients, and intervention

As far as outcome measurement is concerned (Table 2), one trial assessed patient-reported outcomes during the first expansion days, three trials assessed outcomes directly post-expansion, and four trials assessed outcomes after an additional retention/observation period. A wide variety of outcomes were measured by cone beam computerized tomography (CBCT) (four trials), rhinomanometry (two trials), plaster cast models (one trial), and questionnaires (one trial).

Table 2 Characteristics of included randomized trials pertaining to follow-up and outcome

Risk of bias within studies

The risk of bias of included trials ranged between low (one trial), unclear/low (two trials), and high (three trials). The most frequent reason for assigning a high risk for bias was the lack of blinding for the outcome measurement (three trials), followed by a potentially inadequate generation of the randomization sequence (one trial) (Fig. 2; Additional file 1: Appendix 5).

Fig. 2
figure 2

Risk of bias summary for included randomized trials with the Cochrane tool

Results of individual studies and synthesis of results

The results of every extracted outcome from each included randomized trial are given in Additional file 1: Appendix 6a for the comparison of bone-borne versus tooth-borne expanders and in Additional file 1: Appendix 6b for the comparison of hybrid (tooth-bone-borne) versus tooth-borne expanders. Only statistically significant and clinically relevant differences are given here, which pertain to results of single trials, unless meta-analyses are available, where they are reported as such and given in Table 3.

Table 3 Results of random effects meta-analyses performed from randomized trials comparing tooth-borne rapid maxillary expansion with either bone-borne or hybrid (tooth-bone-borne) rapid maxillary expansion

Bone-borne compared with tooth-borne rapid maxillary expansion

As far as differences directly post-expansion are concerned (Additional file 1: Appendix 6a), only some dental positional/inclinational significant differences were reported from a single trial. As such, bone-borne RME was associated with less dental expansion at the canine (MD − 0.7 mm; 95% CI − 1.0 to − 0.4 mm), less buccal tipping at the first premolar (MD − 4.3°; 95% CI − 6.9 to − 1.6°), and less buccal tipping at the first molar (MD − 5.4°; 95% CI − 8.0 to − 2.7°) compared to tooth-borne RME. Additionally, a meta-analysis of two trials indicated that bone-borne RME was associated with less buccal tipping of the first premolar (MD − 4.1°; 95% CI − 6.0 to − 2.1°).

As far as data after a retention/observation period post-expansion are concerned (Additional file 1: Appendix 6a), several skeletal maxillary, dental positional/inclinational, and nasal cavity clinically relevant differences were identified. One trial indicated that bone-borne RME was associated with (i) greater skeletal expansion at the incisal foramen (MD 1.8 mm; 95% CI 1.3 to 2.3 mm), (ii) greater suture opening at the first premolar (MD 2.3 mm; 95% CI 1.7 to 2.9 mm), and (iii) greater suture opening at the first molar (MD 2.0 mm; 95% CI 1.4 to 2.6 mm) than tooth-borne RME. Three different single trials provided evidence that bone-borne RME was associated with (i) less intercanine width expansion (MD − 0.5 mm; 95% CI − 1.0 to − 0.1 mm), (ii) less inter-first-premolar width expansion (MD − 1.8 mm; 95% CI − 2.7 to − 0.9 mm), (iii) less buccal inclination of the first premolar (MD − 5.1°; 95% CI − 6.8 to − 3.4°), (iv) less buccal inclination of the first molar (MD − 5.2°; 95% CI − 7.0 to − 3.5°), and (v) greater buccal bone thickness at the 1st premolar (MD 0.3 mm; 95% CI 0.1 to 0.4 mm) than tooth-borne RME. Additionally, bone-borne RME was associated with greater expansion of the nasal cavity width at the first molar (MD 1.7 mm; 95% CI 0.8 to 2.6 mm) than tooth-borne RME. Finally, no clinically relevant differences regarding skeletal vertical dimension, mandibular dimensions, or root resorption were observed.

Hybrid (tooth-bone-borne) compared with tooth-borne rapid maxillary expansion

As far as differences directly post-expansion are concerned (Additional file 1: Appendix 6b), only one trial indicated that hybrid RME was associated with less intercanine width expansion (MD − 0.7 mm; 95% CI − 0.9 to − 0.4 mm) compared to tooth-borne RME.

As far as differences after a retention/observation period are concerned, one trial indicated that hybrid RME was associated with (i) less inter-first-premolar width expansion (MD − 4.3 mm; 95% CI − 7.0 to − 1.6 mm), (ii) less inter-second-premolar width expansion (MD − 3.3 mm; 95% CI − 6.2 to − 0.5 mm), (iii) greater buccal bone thickness at the first premolar (MD 0.8 mm; 95% CI 0.3 to 1.3 mm), and (iv) lower palatal bone thickness at the first premolar (MD − 1.6 mm; 95% CI − 2.2 to − 1.0 mm) than tooth-borne RME. Finally, one meta-analysis of two trials indicated that hybrid RME was associated with less buccal tipping of the first premolar (MD − 4.0 mm; 95% CI − 7.1 to − 0.9 mm) than tooth-borne RME.

Risk of bias across studies and additional analyses

No formal assessment of risk of bias across studies or any subgroup/sensitivity analyses could be performed due to the limited number of included trials in the meta-analyses, which would be rendered instable by trial omissions.

The quality of evidence for the comparison of bone-borne versus tooth-borne RME varied between very low and moderate (Table 4). Moderate quality of evidence supported the greater sutural opening at the first premolar and the first molar, low quality of evidence backed the change in nasal cavity width or root resorption, while very low quality of evidence supported dental tipping changes during RME. The main reasons for downgrading were (i) the imprecision due to inadequate sample sizes of all trials, (ii) bias due to lack of outcome measurement blinding and inadequate randomization sequence generation, and (iii) inconsistency due to high heterogeneity.

Table 4 Summary of findings table according to the GRADE approach for the comparison of bone-borne versus tooth-borne rapid maxillary expansion

The quality of evidence for the comparison of hybrid tooth-bone-borne versus tooth-borne RME varied between low and moderate (Table 5). Apart from the change in the external maxillary skeletal width that was supported by low quality of evidence, all other comparisons were backed by moderate quality of evidence. The main reasons for downgrading were (i) the imprecision due to inadequate sample sizes of all trials and (ii) bias due to lack of outcome measurement blinding and inadequate randomization sequence generation.

Table 5 Summary of findings table according to the GRADE approach for the comparison of hybrid (tooth-bone-borne) versus tooth-borne rapid maxillary expansion

Discussion

Summary of evidence

The present systematic review summarizes and critically appraises evidence from randomized clinical trials on the potential benefits of partly or completely skeletally anchored RME compared to conventional RME and is to our knowledge the first review to do so. A total of 12 publications pertaining to six unique trials including a total of 264 patients in need of RME were finally included in the analyses. The quality of recommendations that can be drawn from existing evidence according to the GRADE approach varies between very low to moderate, as all are based on few trials with mostly inadequate sample sizes and some trials have methodological limitations. This means that our confidence in these recommendations is hampered and future trials might change these provisional recommendations.

The idea behind using skeletal anchorage for RME is that greater skeletal expansion of the maxilla could theoretically be obtained. This systematic review found that bone-borne RME was associated with greater opening of the maxillary suture at the incisal foramen (1.8 mm more), first premolars (2.3 mm more), and the first molars (2.0 mm more) compared to conventional RME (Additional file 1: Appendix 6a). This might be explained by a direct force application to the maxilla, which leads to separation of the median suture and displacement of the two maxillary halves [29]. Sutural opening was not assessed for hybrid RME in any of the identified trials. Interestingly, no significant increase in the external buccal maxillary width at the first molars of either bone-borne (P = 0.22; Additional file 1: Appendix 6a) or hybrid RME (P = 0.54; Additional file 1: Appendix 6b) was seen compared to conventional RME. This might be attributed to either bone remodeling or alveolar bending [18].

At the same time, skeletally anchored RME is proposed over tooth-borne RME by many as a means of reducing the adverse effect of buccal tipping of the anchorage teeth. Evidence from the present review was inconclusive on whether bone-borne or hybrid RME could prevent buccal tooth tipping to a clinically meaningful degree. Even though the effects for the first premolar or first molar for both types of skeletally anchored RMEs were < 0 (indicating less tipping than conventional RME), this was mostly not statistically significant (Table 3). However, caution is warranted in the interpretation of these findings, since this might be attributed to the limited number of trials with small sample sizes and heterogeneous results or to the fact that studies measured this outcome separately for right and left teeth. An indirect way to measure maxillary expansion in conjunction with tooth tipping might be to look at the buccal bone thickness at the first premolars and the first molars. Here, evidence from one trial [30] indicated that bone-borne RME was associated with significantly greater buccal bone thickness at the first premolar and first molar (0.14 mm and 0.25 mm, respectively; Additional file 1: Appendix 6a) compared to conventional tooth-borne RME. On the other side, data on buccal bone thickness after hybrid RME were more inconclusive, indicating greater bone thickness at the first premolar (0.63 mm more), but not the first molar (Additional file 1: Appendix 6b) [18]. This might be attributed to the fact that the hybrid RME appliance was anchored on the first molars, but not the first premolars. When analyzing dental tipping after RME, it is important to bear in mind the pyramid- or triangle-shaped opening of the suture due to the two centers of rotation, which leads to bending of the alveolar bone and subsequent tipping of the teeth [18, 31]. Therefore, there are some indications that tipping of the anchorage teeth might be influenced by anchorage type, although further evidence is needed to consolidate these.

Another outcome often measured in trials comparing bone-borne or hybrid RME to conventional RME is the dental arch width—usually at the first premolars or the first molars. Existing data indicated no significant difference in this dental arch width for either skeletally anchored RME compared to conventional RME (P > 0.05; Table 3). However, this is to be expected, since the most widely used criterion to terminate RME was clinically determined when the upper palatal molar cusps touched the lower molar buccal cusps.

Several studies have reported increased width of the nasal cavity post expansion, which seems to be associated with the opening of the midpalatal suture [17, 32]. Evidence from a trial included in the present review indicated that bone-borne RME was associated with increased nasal cavity width at the first molar (by 1.7 mm; Additional file 1: Appendix 6a) compared to conventional RME [30]. Additionally, data from another trial indicated that hybrid RME was associated with increased nasal airflow (by 57.7 cm3/s; Additional file 1: Appendix 6b) and reduced nasal airway resistance (by − 0.2 Pa s/cm3; Additional file 1: Appendix 6b) compared to conventional RME [33]. Although it has been shown that RME in general might potentially increase the volume of the upper airways [34], the effect to which this contributes in improved breathing or quality of life in unclear. It must be noted here that based on current evidence no recommendations can be made for the use of any kind of RME for the treatment of breathing disorders like obstructive sleep apnea [35].

Another side effect of RME that could potentially be alleviated using skeletal anchorage is the iatrogenic root resorption of the premolars and molars used as anchorage for the RME appliance [16]. Two trials included in the present review using bone-borne RME found no considerable differences in either linear or volumetric root resorption compared to conventional RME [30, 36].

Finally, as patient reported outcomes are concerned, only one trial existed that compared the short-term effect on the pain and discomfort during the first week of RME with a hybrid and a conventional appliance [37]. The results indicated that no significant differences exist in the pain or discomfort and analgesic consumption, apart from pain from molars/incisors and tensions from the jaw on day 4, where the hybrid RME group reported less disturbances than the conventional RME group.

Strengths and limitations

The strengths of this systematic review consist of the registration of its a priori protocol in PROSPERO [38, 39], its exhaustive literature search, its improved analytical methods [22], the use of the GRADE approach [25] to assess the quality of the meta-evidence, and the transparent provision of the study’s data [24, 40].

However, certain limitations also exist. First and foremost, although only randomized trials were included that are generally less prone to bias than non-randomized trials [41], many of them had methodological limitations that might lead to bias [42]. Furthermore, the identified studies were predominantly small and this might introduce small-study effects [43]. Finally, the limited number of included studies and their suboptimal reporting did not enable assessments of heterogeneity, as well as the conduct of several analyses for subgroups (including among others different implant placement regions and different RME appliances), small-study effects, and reporting biases that were planned to assess the robustness of the analyses [44].

Conclusions

Existing evidence from randomized trials on RME for transverse maxillary deficit indicates that bone-borne RME might be associated with greater skeletal maxillary expansion post-retention compared to tooth-borne RME, while no significant differences could be identified for a buccal tooth tipping, nasal cavity width, and root resorption. Hybrid tooth-bone-borne RME was associated with less patient discomfort during the first days of activation, less buccal tipping of the first premolar and lower nasal airway resistance post-retention compared to tooth-borne RME, while no significant differences could be found regarding skeletal maxillary width, molar inclination, and analgesic use. Overall, there exist some indications of potential benefits from partially or completely skeletally anchored RME, but only a few trials with very limited sample sizes and some risk of bias exist, which hampers our confidence in drawing clinical recommendations. Future well-designed randomized trials with a priori sample size calculation and blinded assessment of skeletal, dental, and breathing-related outcomes are needed.

Abbreviations

CBCT:

Cone beam computerized tomography

CI:

Confidence interval

GRADE:

Grading of Recommendations Assessment, Development and Evaluation

MD:

Mean difference

PICOS:

Participants-Interventions-Comparisons-Outcome-Study design

RCT:

Randomized clinical trial

REML:

REstricted Maximum Likelihood

RME:

Rapid maxillary expansion

RR:

Relative risk

References

  1. Thilander B, Myrberg N. The prevalence of malocclusion in Swedish schoolchildren. Scand J Dent Res. 1973;81:12–21.

    PubMed  Google Scholar 

  2. Tausche E, Luck O, Harzer W. Prevalence of malocclusions in the early mixed dentition and orthodontic treatment need. Eur J Orthod. 2004;26:237–44.

    Article  Google Scholar 

  3. Lagravère MO, Carey J, Heo G, Toogood RW, Major PW. Transverse, vertical, and anteroposterior changes from bone-anchored maxillary expansion vs traditional rapid maxillary expansion: a randomized clinical trial. A J Orthod Dentofacial Orthop. 2011;137:304 e1–12.

  4. Zandi M, Miresmaeili A, Heidari A. Short-term skeletal and dental changes following bone-borne versus tooth-borne surgically assisted rapid maxillary expansion: a randomized clinical trials study. J Craniomaxillofac Surg. 2014;42:1190–5.

    Article  Google Scholar 

  5. Thilander B, Rubio G, Pena L, de Mayorga C. Prevalence of temporomandibular dysfunction and its association with malocclusion in children and adolescents: an epidemiologic study related to specified stages of dental development. Angle Orthod. 2002;72:146–54.

    PubMed  Google Scholar 

  6. Angell EC. Treatment of irregularities of the permanent or adult teeth. Dent Cosmos. 1860;1:540–4.

    Google Scholar 

  7. Lagravère MO, Major PW, Flores-Mir C. Long-term skeletal changes with rapid maxillary expansion: a systematic review. Angle Orthod. 2005;75:1046–52.

  8. Lagravère MO, Heo G, Major PW, Flores-Mir C. Meta-analysis of immediate changes with rapid maxillary expansion treatment. J Am Dent Assoc. 2006;137:44–53.

  9. Zhou Y, Long H, Ye N, Xue J, Yang X, Liao L, Lai W. The effectiveness of non-surgical maxillary expansion: a meta-analysis. Eur J Orthod. 2013;36:233–42.

    Article  Google Scholar 

  10. Basciftci FA, Mutlu N, Karaman AI, Malkoc S, Küçükkolbasi H. Does the timing and method of rapid maxillary expansion have an effect on the changes in nasal dimensions? Angle Orthod. 2002;72:118–23.

    PubMed  Google Scholar 

  11. Basciftci FA, Karaman AI. Effects of a modified acrylic bonded rapid maxillary expansion appliance and vertical chin cap on dentofacial structures. Angle Orthod. 2002;72:61–71.

    PubMed  Google Scholar 

  12. da Silva Filho OG, Boas MC, Capelozza Filho L. Rapid maxillary expansion in the primary and mixed dentitions: a cephalometric evaluation. Am J Orthod Dentofac Orthop. 1991;100:171–9.

    Article  Google Scholar 

  13. Lo Giudice A, Barbato E, Cosentino L, Ferraro CM, Leonardi R. Alveolar bone changes after rapid maxillary expansion with tooth-born appliances: a systematic review. Eur J Orthod. 2018;40:296–303.

    Article  Google Scholar 

  14. Garib DG, Henriques JF, Janson G, de Freitas MR, Fernandes AY. Periodontal effects of rapid maxillary expansion with tooth-tissue-borne and tooth-borne expanders: a computed tomography evaluation. Am J Orthod Dentofac Orthop. 2006;129:749–58.

    Article  Google Scholar 

  15. Watson WG. Expansion and fenestration or dehiscence. Am J Orthod. 1980;77:330–2.

    Article  Google Scholar 

  16. Samandara A, Papageorgiou SN, Ioannidou-Marathiotou I, Kavvadia-Tsatala S, Papadopoulos MA. Evaluation of orthodontically induced external root resorption following orthodontic treatment using cone beam computed tomography (CBCT): a systematic review and meta-analysis. Eur J Orthod. 2018. https://doi.org/10.1093/ejo/cjy027 [Epub ahead of print].

  17. Garib DG, Henriques JF, Janson G, Freitas MR, Coelho RA. Rapid maxillary expansion – tooth tissue-borne versus tooth-borne expanders: a computed tomography evaluation of dentoskeletal effects. Angle Orthod. 2005;75:548–57.

    PubMed  Google Scholar 

  18. Gunyuz Toklu M, Germec-Cakan D, Tozlu M. Periodontal, dentoalveolar, and skeletal effects of tooth-borne and tooth-bone-borne expansion appliances. Am J Orthod Dentofac Orthop. 2015;148:97–109.

    Article  Google Scholar 

  19. Higgins JPT, Green S. Cochrane handbook for systematic reviews of interventions version 5.1.0, The Cochrane Collaboration, London, UK. http://handbook.cochrane.org (November 2018, date last accessed) 2011.

  20. Liberati A, Altman DG, Tetzlaff J, Mulrow C, Gøtzsche PC, Ioannidis JP, et al. The PRISMA statement for reporting systematic reviews and meta-analyses of studies that evaluate health care interventions: explanation and elaboration. J Clin Epidemiol. 2009;62:e1–34.

    Article  Google Scholar 

  21. Papageorgiou SN. Meta-analysis for orthodontists: part I--how to choose effect measure and statistical model. J Orthod. 2014;41:317–26.

    Article  Google Scholar 

  22. Langan D, Higgins JPT, Jackson D, Bowden J, Veroniki AA, Kontopantelis E, Viechtbauer W, Simmonds M. A comparison of heterogeneity variance estimators in simulated random-effects meta-analyses. Res Synth Methods. 2018. https://doi.org/10.1002/jrsm.1316 [Epub ahead of print].

  23. IntHout J, Ioannidis JP, Rovers MM, Goeman JJ. Plea for routinely presenting prediction intervals in meta-analysis. BMJ Open. 2016;6:e010247.

    Article  Google Scholar 

  24. Krüsi M, Eliades T, Papageorgiou SN. Are there benefits from using bone-borne maxillary expansion instead of tooth-borne maxillary expansion? A systematic review with meta-analysis. [Data set]. Zenodo; 2018. https://doi.org/10.5281/zenodo.1494107. Accessed Nov 2018.

  25. Guyatt GH, Oxman AD, Schünemann HJ, Tugwell P, Knottnerus A. GRADE guidelines: a new series of articles in the journal of clinical epidemiology. J Clin Epidemiol. 2011;64:380–2.

    Article  Google Scholar 

  26. Carrasco-Labra A, Brignardello-Petersen R, Santesso N, Neumann I, Mustafa RA, Mbuagbaw L, et al. Improving GRADE evidence tables part 1: a randomized trial shows improved understanding of content in summary of findings tables with a new format. J Clin Epidemiol. 2016;74:7–18.

    Article  Google Scholar 

  27. Norman GR, Sloan JA, Wyrwich KW. Interpretation of changes in health-related quality of life: the remarkable universality of half a standard deviation. Med Care. 2003;41:582–92.

    PubMed  Google Scholar 

  28. Schünemann H, Brozek J, Oxman A. GRADE handbook for grading quality of evidence and strength of recommendation. Version 3.2 [updated March 2009]. The GRADE Working Group; 2009. https://gdt.gradepro.org/app/handbook/handbook.html. Accessed Nov 2018.

  29. Haas AJ. Rapid expansion of the maxillary dental arch and nasal cavity by opening the midpalatal suture. Angle Orthod. 1961;31:73–90.

    Google Scholar 

  30. Celenk-Koca T, Erdinc AE, Hazar S, Harris L, English JD, Akyalcin S. Evaluation of miniscrew-supported rapid maxillary expansion in adolescents: a prospective randomized clinical trial. Angle Orthod. 2018;88:702–9.

    Article  Google Scholar 

  31. Canan S, Şenışık NE. Comparison of the treatment effects of different rapid maxillary expansion devices on the maxilla and the mandible. Part 1: evaluation of dentoalveolar changes. Am J Orthod Dentofac Orthop. 2017;51:1125–38.

    Article  Google Scholar 

  32. Garrett B, Caruso JM, Rungcharassaeng K, Farrage JR, Kim JS, Taylor GD. Skeletal effects to the maxilla after rapid maxillary expansion assessed with cone-beam computed tomography. Am J Orthod Dentofac Orthop. 2008;134:8–9.

    Article  Google Scholar 

  33. Bazargani F, Magnuson A, Ludwig B. Effects on nasal airflow and resistance using two different RME appliances: a randomized controlled trial. Eur J Orthod. 2018;40:281–4.

    Article  Google Scholar 

  34. Buck LM, Dalci O, Darendeliler MA, Papageorgiou SN, Papadopoulou AK. Volumetric upper airway changes after rapid maxillary expansion: a systematic review and meta-analysis. Eur J Orthod. 2017;39:463–73.

    PubMed  Google Scholar 

  35. Koretsi V, Eliades T, Papageorgiou SN. Oral interventions for obstructive sleep apnea. Dtsch Arztebl Int. 2018;115:200–7.

    PubMed  PubMed Central  Google Scholar 

  36. Forst DD. External root resorption associated with maxillary expansion therapies as evaluated via cone beam computed tomography: a retrospective randomized clinical trial, Master thesis. Alberta: University of Alberta; 2015.

    Google Scholar 

  37. Feldmann I, Bazargani F. Pain and discomfort during the first week of rapid maxillary expansion (RME) using two different RME appliances: a randomized controlled trial. Angle Orthod. 2017;87:391–6.

    Article  Google Scholar 

  38. Sideri S, Papageorgiou SN, Eliades T. Are orthodontic systematic reviews registered a priori in PROSPERO? J Orthod. 2017;44:249–55.

    Article  Google Scholar 

  39. Sideri S, Papageorgiou SN, Eliades T. Registration in the international prospective register of systematic reviews (PROSPERO) of systematic review protocols was associated with increased review quality. J Clin Epidemiol. 2018;100:103–10.

    Article  Google Scholar 

  40. Papageorgiou SN, Cobourne MT. Data sharing in orthodontic research. J Orthod. 2018;45:1–3.

    Article  Google Scholar 

  41. Papageorgiou SN, Kloukos D, Petridis H, Pandis N. Publication of statistically significant research findings in prosthodontics & implant dentistry in the context of other dental specialties. J Dent. 2015;43:1195–202.

    Article  Google Scholar 

  42. Savovic J, Turner RM, Mawdsley D, Jones HE, Beynon R, Higgins JPT, Sterne JAC. Association between risk-of-Bias assessments and results of randomized trials in Cochrane Reviews: The ROBES Meta-Epidemiologic Study. Am J Epidemiol. 2018;187:1113–22.

    Article  Google Scholar 

  43. Cappelleri JC, Ioannidis JP, Schmid CH, de Ferranti SD, Aubert M, Chalmers TC, Lau J. Large trials vs meta-analysis of smaller trials: how do their results compare? JAMA. 1996;276:1332–8.

    Article  Google Scholar 

  44. Papageorgiou SN. Meta-analysis for orthodontists: part II--is all that glitters gold? J Orthod. 2014;41:327–36.

    Article  Google Scholar 

  45. Lagrevere MOV. Analysis of Skeletal and Dental Changes with a Tooth-Borne and a Bone-Borne Maxillary Expansion Appliance assessed through Digital Volumetric Imaging. PhD Thesis. University of Alberta. 2009.

  46. Lagravère MO, Carey J, Heo G, Toogood RW, Major PW. Transverse, vertical, and anteroposterior changes from bone-anchored maxillary expansion vs traditional rapid maxillary expansion: a randomized clinical trial. Am J Orthod Dentofacial Orthop. 2010;137(3):304.e1-12; discussion -5.

  47. Lagravère MO, Gamble J, Major PW, Heo G. Transverse dental changes after tooth-borne and bone-borne maxillary expansion. Int Orthod. 2013;11(1):21–34.

  48. Kabalan O, Gordon J, Heo G, Lagravère MO. Nasal airway changes in bone-borne and tooth-borne rapid maxillary expansion treatments. Int Orthod. 2015;13(1):1–15.

  49. Stepanko LS, Lagravère MO. Sphenoid bone changes in rapid maxillary expansion assessed with conebeam computed tomography. Korean J Orthod. 2016;46(5):269–79.

Download references

Acknowledgements

We thank Sercan Akyalcin (Tufts University School of Dental Medicine) for providing clarifications on their randomized trial.

Availability of data and materials

All data generated or analyzed during this study are included in this published article or its supplements, while its dataset is openly provided through Zenodo (https://doi.org/10.5281/zenodo.1494107).

Protocol and registration

The protocol was registered prior to the study in the publicly assessable PROSPERO database (CRD42017079107).

Author information

Authors and Affiliations

Authors

Contributions

The first and last authors (MK and SNP) performed study selection, data extraction, and risk of bias assessment independently and in duplicate. Literature search and data analysis were performed from the third author (SNP). Disagreements were resolved by discussion or the involvement of the second author (TE). All authors read and approved the final manuscript.

Corresponding author

Correspondence to Spyridon N. Papageorgiou.

Ethics declarations

Ethics approval and consent to participate

Ethical approval was not required.

Consent for publication

Not applicable.

Competing interests

The authors declare that they have no competing interests.

Publisher’s Note

Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.

Additional file

Additional file 1:

Appendix 1. Literature searched conducted to identify eligible studies (last search date September 28, 2018). Appendix 2. Additional information about this review, including deviations from protocol. Appendix 3. List of studies identified from the literature and their inclusion/exclusion status, with reasons. Appendix 4. Details of the expansion appliances used in the included trials. Appendix 5. Risk of bias assessment of included randomized trials. Appendix 6a. List of included trials comparing bone-borne with tooth-borne rapid maxillary expansion. Appendix 6b. List of included trials comparing hybrid (tooth-bone-borne) with tooth-borne rapid maxillary expansion. (PDF 694 kb)

Rights and permissions

Open Access This article is distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution, and reproduction in any medium, provided you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made.

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Krüsi, M., Eliades, T. & Papageorgiou, S.N. Are there benefits from using bone-borne maxillary expansion instead of tooth-borne maxillary expansion? A systematic review with meta-analysis. Prog Orthod. 20, 9 (2019). https://doi.org/10.1186/s40510-019-0261-5

Download citation

  • Received:

  • Accepted:

  • Published:

  • DOI: https://doi.org/10.1186/s40510-019-0261-5

Keywords