样式: 排序: IF: - GO 导出 标记为已读
-
Peridynamic simulation of creep deformation and damage Contin. Mech. Thermodyn. (IF 2.6) Pub Date : 2024-03-17 Deepak Behera, Pranesh Roy, Erdogan Madenci
-
Exact solution of one problem of imposition of large deformations in a compound slab with pre-deformed layers of incompressible nonlinear elastic micropolar material Contin. Mech. Thermodyn. (IF 2.6) Pub Date : 2024-03-16 V. A. Levin, K. M. Zingerman, A. E. Belkin
-
Variable properties reconstruction for functionally graded thermoelectroelastic cylinder Contin. Mech. Thermodyn. (IF 2.6) Pub Date : 2024-03-13 Alexander Vatulyan, Sergey Nesterov, Rostislav Nedin
-
Asymptotic behaviour for convection with anomalous diffusion Contin. Mech. Thermodyn. (IF 2.6) Pub Date : 2024-03-06 Brian Straughan, Antonio Barletta
We investigate the fully nonlinear model for convection in a Darcy porous material where the diffusion is of anomalous type as recently proposed by Barletta. The fully nonlinear model is analysed but we allow for variable gravity or penetrative convection effects which result in spatially dependent coefficients. This spatial dependence usually requires numerical solution even in the linearized case
-
Non-stationary elastic wave scattering and energy transport in a one-dimensional harmonic chain with an isotopic defect Contin. Mech. Thermodyn. (IF 2.6) Pub Date : 2024-03-04
Abstract The fundamental solution describing non-stationary elastic wave scattering on an isotopic defect in a one-dimensional harmonic chain is obtained in an asymptotic form. The chain is subjected to unit impulse point loading applied to a particle far enough from the defect. The solution is a large-time asymptotics at a moving point of observation, and it is in excellent agreement with the corresponding
-
A modified mathematical model for thermo-viscous thermal conduction incorporating memory-based derivatives and the Moore–Gibson–Thomson equation Contin. Mech. Thermodyn. (IF 2.6) Pub Date : 2024-03-02 Ahmed E. Abouelregal, Marin Marin, Sameh S. Askar, Abdelaziz Foul
-
Strain-gradient finite elasticity solutions to rigid bar pull-out test Contin. Mech. Thermodyn. (IF 2.6) Pub Date : 2024-02-23 Nasrin Rezaei, M. Erden Yildizdag, Emilio Turco, Anil Misra, Luca Placidi
-
Experimental studies and the model of anisotropic plasticity for additively manufactured stainless steel with stress state dependent properties Contin. Mech. Thermodyn. (IF 2.6) Pub Date : 2024-02-22 Alexey Fedorenko, Boris Fedulov, Stanislav Evlashin, Oleg Staroverov, Alexander Pankov, Svetlana Shalnova, Evgeny Lomakin
-
Wave propagation with two delay times in an isotropic porous micropolar thermoelastic material Contin. Mech. Thermodyn. (IF 2.6) Pub Date : 2024-02-21
Abstract In this paper, we are following the plane time-harmonic waves propagation in an entire linear thermoelastic space, knowing the wavelength. Concerning the thermodynamic response, we fit the dual phase-lag model, while the effect of porosity on elasticity is given by Cowin–Nunziato theory. We obtain two shear waves and five longitudinal waves as: quasi-elastic wave, quasi-microrotational wave
-
Comparison of the symmetric hyperbolic thermodynamically compatible framework with Hamiltonian mechanics of binary mixtures Contin. Mech. Thermodyn. (IF 2.6) Pub Date : 2024-02-21 Martin Sýkora, Michal Pavelka, Ilya Peshkov, Piotr Minakowski, Václav Klika, Evgeniy Romenski
-
Static bending analysis of a transversely cracked strip tapered footing on a two-parameter soil using a new beam finite element Contin. Mech. Thermodyn. (IF 2.6) Pub Date : 2024-02-17 Denis Imamović, Matjaž Skrinar
-
On the $$\Lambda $$ -fractional continuum mechanics fields Contin. Mech. Thermodyn. (IF 2.6) Pub Date : 2024-02-14 K. A. Lazopoulos, A. K. Lazopoulos
-
Thermodynamically extended symplectic numerical simulation of viscoelastic, thermal expansion and heat conduction phenomena in solids Contin. Mech. Thermodyn. (IF 2.6) Pub Date : 2024-02-12 Donát M. Takács, Áron Pozsár, Tamás Fülöp
-
Interplay of surface and bulk elasticity in morphological stability of ultra-thin film coatings Contin. Mech. Thermodyn. (IF 2.6) Pub Date : 2024-02-06 Gleb Shuvalov, Sergey Kostyrko, Holm Altenbach
-
Investigation of thermomechanical properties of solid rocket propellant used in multi-barrel rocket systems Contin. Mech. Thermodyn. (IF 2.6) Pub Date : 2024-01-30 Marcin Cegla, Magdalena Czerwinska, Piotr Kasprzak
-
A second and third gradient material with torsion resulting from the homogenization of a highly contrasted rigid fibre-reinforced composite Contin. Mech. Thermodyn. (IF 2.6) Pub Date : 2024-01-29
Abstract We study the homogenization of an elastic material made of an elastic matrix in contact with highly contrasted three-dimensional elastic rigid fibres with circular cross section. The interaction between the matrix and the fibres is described by a local interface adhesion law. Assuming that the Lamé constants in the fibres and the stiffness coefficient of the adhesive have appropriate orders
-
Multiscale hydrodynamics in thrust bearing involving surface roughness Contin. Mech. Thermodyn. (IF 2.6) Pub Date : 2024-01-27
Abstract When the surface roughness is comparable to the surface separation in a hydrodynamic thrust bearing, the effect of the surface roughness should be considered. In the condition of low bearing clearances such as on the scales of 1 nm and 10 nm, normally not only the surface roughness but also the physically adsorbed layer on the bearing surface should be simultaneously considered in evaluating
-
Mathematical model of osteophyte development with the first attempt to identify a biomechanical parameter Contin. Mech. Thermodyn. (IF 2.6) Pub Date : 2024-01-22 Ewa Bednarczyk, Szymon Sikora, Krzysztof Jankowski, Zuzanna Żołek-Tryznowska, Tomasz Murawski, Jakub Bańczerowski, Yanfei Lu, Cezary Senderowski
-
Wear of MoS2 layer in a ball-on-disk test: experiments and finite element modeling Contin. Mech. Thermodyn. (IF 2.6) Pub Date : 2024-01-16 Marcin Białas, Jan Maciejewski, Stanisław Kucharski
-
Numerical modeling and simulation of material extrusion-based 3-D printing processes with a material point method framework Contin. Mech. Thermodyn. (IF 2.6) Pub Date : 2023-12-29 M. Erden Yildizdag
-
A liquid inclusion having an n-fold axis of symmetry in an infinite isotropic elastic matrix Contin. Mech. Thermodyn. (IF 2.6) Pub Date : 2023-12-24 Xu Wang, Peter Schiavone
-
A three-dimensional continuum model for the mechanics of an elastic medium reinforced with fibrous materials in finite elastostatics Contin. Mech. Thermodyn. (IF 2.6) Pub Date : 2023-11-23 Chun I. L. Kim, Suprabha Islam, Seunghwa Yang
-
Characterization of crystallization kinetics in Polyamide 6 with a focus on modeling the thermoforming process: experiments, modeling, simulations Contin. Mech. Thermodyn. (IF 2.6) Pub Date : 2023-11-22 Sameer Kulkarni, Marie-Christine Reuvers, Tim Brepols, Stefanie Reese, Michael Johlitz, Alexander Lion
-
Welding of P355NH steel for the construction of a medium-pressure gas pipeline Contin. Mech. Thermodyn. (IF 2.6) Pub Date : 2023-11-21 Bożena Szczucka-Lasota, Tomasz Węgrzyn, Tadeusz Szymczak, Bogusław Łazarz, Abílio Pereria Silva, Adam Jurek
-
An accurate numerical method of solving singular boundary value problems for the stationary flow of granular materials and its application Contin. Mech. Thermodyn. (IF 2.6) Pub Date : 2023-11-19 Sergei Alexandrov, Chih-Yu Kuo, Yeau-Ren Jeng
-
Equivalent analytical formulation-based multibody elastic system analysis using one-dimensional finite elements Contin. Mech. Thermodyn. (IF 2.6) Pub Date : 2023-11-17 Sorin Vlase, Marin Marin, Andreas Öchsner, Omar El Moutea
For the particular case of an elastic multibody system (MBS) that can be modeled using one-dimensional finite elements, the main methods offered by analytical mechanics in its classical form for analysis are presented in a unitary description. The aim of the work is to present in a unitary form the main methods offered by classical mechanics for the analysis of solid systems. There is also a review
-
Unified and accurate simulation for large elastic strain responses of rubberlike soft materials under multiple modes of loading Contin. Mech. Thermodyn. (IF 2.6) Pub Date : 2023-11-17 Jia Kang, Long-Xu Tan, Quan-Pu Liu, Si-Yu Wang, Otto T. Bruhns, Heng Xiao
-
Analysis of the contact critical pressure of collapsible tubes for biomedical applications Contin. Mech. Thermodyn. (IF 2.6) Pub Date : 2023-11-10 Marco Laudato, Mihai Mihaescu
-
Experimental investigations and numerical modelling: a fruitful interaction for the nonlinear dynamical analysis of masonry structures Contin. Mech. Thermodyn. (IF 2.6) Pub Date : 2023-11-08 Riccardo Mario Azzara, Maria Girardi, Cristina Padovani, Daniele Pellegrini
-
Experimental verification of the internal ballistics numerical simulations of classical weapons in Lagrangian coordinates Contin. Mech. Thermodyn. (IF 2.6) Pub Date : 2023-10-31 Filip Kagankiewicz, Mariusz Magier
-
Dependence on strain rate of the glass and ductile-to-brittle transition temperatures of an ultra-high molecular weight polyethylene used at cryogenic temperature Contin. Mech. Thermodyn. (IF 2.6) Pub Date : 2023-10-30 Nathan Odou, James Hermary, Cristian Ovalle, Lucien Laiarinandrasana
-
Thermodynamically consistent variational theory of porous media with a breaking component Contin. Mech. Thermodyn. (IF 2.6) Pub Date : 2023-10-23 François Gay-Balmaz, Vakhtang Putkaradze
-
Numerical treatment of reactive diffusion using the discontinuous Galerkin method Contin. Mech. Thermodyn. (IF 2.6) Pub Date : 2023-10-13 Wolfgang Flachberger, Jiri Svoboda, Thomas Antretter, Manuel Petersmann, Silvia Leitner
-
Constitutive relationships for osteonal microcracking in human cortical bone using statistical mechanics Contin. Mech. Thermodyn. (IF 2.6) Pub Date : 2023-10-11 S. García-Vilana, D. Sánchez-Molina
-
Phase field modeling of anisotropic fracture Contin. Mech. Thermodyn. (IF 2.6) Pub Date : 2023-10-04 D. Pranavi, A. Rajagopal, J. N. Reddy
-
Workshop “Micropolar continua and beyond” Contin. Mech. Thermodyn. (IF 2.6) Pub Date : 2023-10-03 Wolfgang H. Müller, Victor A. Eremeyev
-
A new combined asymptotic-tolerance model of thermoelasticity problems for thin uniperiodic cylindrical shells Contin. Mech. Thermodyn. (IF 2.6) Pub Date : 2023-09-27 B. Tomczyk, M. Gołąbczak, A. Gołąbczak
-
Integral micromorphic model for band gap in 1D continuum Contin. Mech. Thermodyn. (IF 2.6) Pub Date : 2023-09-23 Milan Jirásek, Martin Horák, Michal Šmejkal
-
Influence of dislocations on equilibrium stability of nonlinearly elastic cylindrical tube with hydrostatic pressure Contin. Mech. Thermodyn. (IF 2.6) Pub Date : 2023-09-18 Evgeniya V. Goloveshkina, Leonid M. Zubov
-
Effects of electric field on vapor–liquid equilibrium of binary mixture Contin. Mech. Thermodyn. (IF 2.6) Pub Date : 2023-09-16 Han Guangze, Li Xinyu
-
Modeling of blood flow in the framework of micropolar theory Contin. Mech. Thermodyn. (IF 2.6) Pub Date : 2023-09-10 Anastasiya E. Vilchevskaya, Elena N. Vilchevskaya, Wolfgang H. Müller, Victor A. Eremeyev
-
Finite element modeling and analysis of flexoelectric plates using gradient electromechanical theory Contin. Mech. Thermodyn. (IF 2.6) Pub Date : 2023-09-09 Yadwinder Singh Joshan, Sushma Santapuri
-
Dynamics and control of band gaps in a mass-in mass metamaterial model with an extra attached mass Contin. Mech. Thermodyn. (IF 2.6) Pub Date : 2023-08-12 A. V. Porubov
-
Instability of supersonic solitary waves in a generalized elastic electrically conductive medium Contin. Mech. Thermodyn. (IF 2.6) Pub Date : 2023-08-09 V. I. Erofeev, A. T. Il’ichev
We study the spectral instability of supersonic solitary waves taking place in a nonlinear model of an elastic electrically conductive micropolar medium. As a result of linearization about the soliton solution, an inhomogeneous scalar equation is obtained. This equation leads to a generalized spectral problem. To establish instability, it is necessary to make sure of the existence of an unstable eigenvalue
-
Homogenised governing equations for pre-stressed poroelastic composites Contin. Mech. Thermodyn. (IF 2.6) Pub Date : 2023-08-09 Laura Miller, Salvatore Di Stefano, Alfio Grillo, Raimondo Penta
-
Hierarchy of generalized continua issued from micromorphic medium constructed by homogenization Contin. Mech. Thermodyn. (IF 2.6) Pub Date : 2023-08-08 S. E. Alavi, J. F. Ganghoffer, H. Reda, M. Sadighi
-
On the exact equilibrium conditions of irregular shells reinforced by beams along the junctions Contin. Mech. Thermodyn. (IF 2.6) Pub Date : 2023-07-31 Violetta Konopińska-Zmysłowska
-
Second-order homogenization of 3-D lattice materials towards strain gradient media: numerical modelling and experimental verification Contin. Mech. Thermodyn. (IF 2.6) Pub Date : 2023-08-01 Danial Molavitabrizi, Sergei Khakalo, Rhodel Bengtsson, S. Mahmoud Mousavi
-
Full factorial design analysis of thermodynamic and kinetic parameters in simulated thermite reaction propagation Contin. Mech. Thermodyn. (IF 2.6) Pub Date : 2023-07-28 Kesiany M. de Souza, Marcelo J. S. de Lemos
-
Thermodynamic basis of granular STZ model and its application in revealing shear resistance reduction mechanisms of granular soils under vibration Contin. Mech. Thermodyn. (IF 2.6) Pub Date : 2023-07-17 Tao Xie, Peijun Guo, Dieter Stolle
-
Control of nonlinear bulk deformation and large shear strain on first-order phase transformation kinetics Contin. Mech. Thermodyn. (IF 2.6) Pub Date : 2023-07-16 Ivan Utkin, Liudmila Khakimova, Stefan Markus Schmalholz, Yury Podladchikov
-
Local gradient theory of dielectrics incorporating polarization inertia and flexodynamic effect Contin. Mech. Thermodyn. (IF 2.6) Pub Date : 2023-07-16 Olha Hrytsyna, Yuriy Tokovyy, Maryan Hrytsyna
-
Second-grade elasticity of three-dimensional pantographic lattices: theory and numerical experiments Contin. Mech. Thermodyn. (IF 2.6) Pub Date : 2023-07-13 Ivan Giorgio, Francesco dell’Isola, David J. Steigmann
-
Development and experimental verification of the new WHA sinters intended for kinetic energy projectiles Contin. Mech. Thermodyn. (IF 2.6) Pub Date : 2023-07-11 Olgierd Goroch, Zbigniew Gulbinowicz, Mariusz Magier, Ewa Bednarczyk, Paweł Skoczylas, Zygmunt Pankowski, Pawel Sweklej, Pawel Zochowski, Wieslaw Jedrzejewski
-
A statistical damage-based shear constitutive model for soils and its application to slope stability analysis Contin. Mech. Thermodyn. (IF 2.6) Pub Date : 2023-07-07 Shaohong Li, Shiguo Xiao
-
On Schwartz–Villat’s formula for analytic functions Contin. Mech. Thermodyn. (IF 2.6) Pub Date : 2023-07-08 Marin Marin, Andreas Öchsner, M. M. Bhatti, Sorin Vlase
In this present study, we intend to obtain a new criterion for the analyticity of a complex function. More exactly, we will deduce some concrete restrictions that must be performed by a function that is complex, is defined on the disc centred at the origin that has radius 1 (hereinafter referred to as the unit disc), which, in addition, is continuous on this disc, including its border, to be analytic
-
Abrasive wear resistance of Fe $$_{{3}}$$ Al and Stellite 6 coatings for the protection of valve faces Contin. Mech. Thermodyn. (IF 2.6) Pub Date : 2023-07-06 Bożena Szczucka-Lasota, Tomasz Wȩgrzyn, Wojciech Tarasiuk, Piotr Cybulko
-
Weakly nonlocal Rayleigh waves with impedance boundary conditions Contin. Mech. Thermodyn. (IF 2.6) Pub Date : 2023-07-01 V. T. N. Anh, P. C. Vinh, T. T. Tuan, L. T. Hue
-
Analysis of hydrogen diffusion in the three stage electro-permeation test Contin. Mech. Thermodyn. (IF 2.6) Pub Date : 2023-06-25 Arun Raina, Vikram S. Deshpande, Emilio Martínez-Pañeda, Norman A. Fleck
-
On the thermal stresses in chiral porous elastic beams Contin. Mech. Thermodyn. (IF 2.6) Pub Date : 2023-06-23 Simona De Cicco, Dorin Ieşan
This paper is concerned with the strain gradient theory of porous thermoelastic solids. We study the deformation of isotropic chiral cylinders subjected to a temperature field that is linear in the axial coordinate. It is shown that the solution can be reduced to the study of two-dimensional problems. The results are used to investigate the deformation of a circular cylinder subjected to a uniform