样式: 排序: IF: - GO 导出 标记为已读
-
Thermophysical Models of Temperature during Friction and Impact J. Mach. Manuf. Reliab. Pub Date : 2024-02-08 A. Yu. Albagachiev, B. M. Gantimirov
-
Assessment of the Performance of a Loaded Cantilever-Fixed Part in the Course of Local Wear J. Mach. Manuf. Reliab. Pub Date : 2024-02-08 A. M. Mikhal’chenkov, I. N. Kravchenko, V. F. Komogortsev, S. A. Fes’kov, G. V. Orekhova, O. V. Barmina
-
Dependence of the Nonuniformity of Thickness of the Vacuum-Arc Discharge Plasma Coating on the Geometric Parameters of the Inter-Blade Channel J. Mach. Manuf. Reliab. Pub Date : 2023-12-28 A. V. Oleinik, K. N. Ramazanov
-
A Comprehensive Approach to Studying the Grinding Capability of Rotary Executive Devices J. Mach. Manuf. Reliab. Pub Date : 2023-12-28 A. N. Telykh, E. V. Chefanova
-
Vibrational Movement of a Solid Body along an Inclined Surface J. Mach. Manuf. Reliab. Pub Date : 2023-12-28 A. I. Munitsyn, L. N. Krainova
-
Analysis of the Effect of Negative Temperature on the Strength of Adhesive-Riveted Joints Made of Aluminum Alloys J. Mach. Manuf. Reliab. Pub Date : 2023-12-28 A. K. Anoprienko, Yu. V. Romanova
-
Position and Force Control of a Robotic System for High Precision Machining of Complex Surfaces J. Mach. Manuf. Reliab. Pub Date : 2023-12-28 V. L. Afonin, V. V. Sleptsov, M. G. Yakovlev
-
Substantiation of the Plane Strain Hypothesis of Cylinders during the Formation of a Thermo-Mechanical Joint J. Mach. Manuf. Reliab. Pub Date : 2023-12-28 D. U. Khasyanova
-
The Efficiency of Engine Oil Containing Carbon Nanotubes during the Deposition Process J. Mach. Manuf. Reliab. Pub Date : 2023-12-28 A. Yu. Albagachiev, A. B. Tokhmetova, S. V. Skripnik
-
Characteristics of the Starter–Alternator with Incorporated Permanent Magnets Made of a Dual-Phase Magnetic Material Rotor J. Mach. Manuf. Reliab. Pub Date : 2023-12-28 F. R. Ismagilov, V. E. Vavilov, O. A. Yushkova, E. A. Pronin, A. A. Zherebtsov
-
A Backlash-Free Gear Coupling J. Mach. Manuf. Reliab. Pub Date : 2023-12-28 A. S. Archibasov, A. Yu. Popov, E. V. Vasil’ev
-
-
Comparative Analysis of Numerical and Analytical Calculation of the Sound Pressure Parameters during Operation of Shut-Off Valves with a Gaseous Medium J. Mach. Manuf. Reliab. Pub Date : 2023-12-28 R. F. Gaffanov, K. A. Myagkov, D. I. Zhuk, S. S. Amelin, I. A. Leshakov
-
Experimental Stand for Wear Tests of Millstones J. Mach. Manuf. Reliab. Pub Date : 2023-12-28 I. S. Kartsev
-
Development and Optimization of High-Speed Loaded Axial Supports with Floating Sectors of Submersible Vane Pumps J. Mach. Manuf. Reliab. Pub Date : 2023-12-28 I. S. Splavskiy
-
Degree of Impact of Dominant Factors of the Working Surfaces of the Wheels of Quarry Locomotives in the Area of Their Contact with the Rails on Their Traction Capacity J. Mach. Manuf. Reliab. Pub Date : 2023-12-28 A. M. Keropyan, A. Yu. Albagachiev
-
Experimental and Finite Element Investigation of a Scratch on the Surface of a Workpiece from a Single Abrasive Grain J. Mach. Manuf. Reliab. Pub Date : 2023-12-28 L. V. Shipulin, A. A. Frolov, E. I. Shulezhko
-
Improving the Sealing Efficiency of Compressor Cylinders of Gas Engine Compressors in the System of Gas-Lift Production of Offshore Fields J. Mach. Manuf. Reliab. Pub Date : 2023-12-18 V. I. Aliev, I. I. Gasanov
-
Fretting Wear of Metal–Metalopolymer Friction Couples J. Mach. Manuf. Reliab. Pub Date : 2023-12-18 A. Yu. Albagachiev, B. M. Gantimirov
-
Study of the Influence of Gas Saturation of Liquid on the Change of Pressure and Water Flow in a Chamber J. Mach. Manuf. Reliab. Pub Date : 2023-12-18 I. S. Splavskiy
-
Simulation of Sliding Friction with Lubrication in the Hydrodynamic Friction Regime J. Mach. Manuf. Reliab. Pub Date : 2023-12-18 A. Yu. Albagachiev, A. Tokhmetova
-
Structure, Kinematics, and Prototyping of a Parallel Manipulator with a Remote Center of Rotation J. Mach. Manuf. Reliab. Pub Date : 2023-12-18 V. A. Glazunov, P. A. Laryushkin, K. A. Shalyukhin
-
The Two-Parameter Fracture Criterion Taking into Account Two-Dimensional Deformation Constraints at the Front of a Mixed-Type Crack J. Mach. Manuf. Reliab. Pub Date : 2023-12-18 A. M. Pokrovskii, Yu. G. Matvienko
-
The Influence of Cutting Conditions on the Operating Characteristics of a Product J. Mach. Manuf. Reliab. Pub Date : 2023-12-18 A. A. Kovalev, N. V. Rogov, S. E. Tikhomirov, A. S. Krasko, Yu. E. Moiseev
-
Influence of the Reinforcement Structure and Boundary Conditions on the Stability of Quadrangular Composite Panels J. Mach. Manuf. Reliab. Pub Date : 2023-12-18 N. S. Azikov, A. V. Zinin
-
A Safety Device Based on a High Temperature Shape Memory Alloy J. Mach. Manuf. Reliab. Pub Date : 2023-12-18 N. N. Popov, D. V. Presnyakov, A. A. Kostyleva
-
The Technique of Tribological Studies of SiSiC High-Speed Thrust Bearings J. Mach. Manuf. Reliab. Pub Date : 2023-12-18 M. N. Erofeev, I. S. Splavskiy
-
A Dynamic Vibration Absorber with Adjustable Stiffness J. Mach. Manuf. Reliab. Pub Date : 2023-12-18 A. N. Zotov, A. P. Tokarev
-
Protective and Tribological Properties of Sulfonate Greases J. Mach. Manuf. Reliab. Pub Date : 2023-12-18 V. D. Samusenko, I. R. Tatur, O. A. Kal’yanova, S. S. Strel’nikova, I. A. Buyanovskii
-
Study of the Influence of Macrogeometry Parameters on the Tightness of Shaft–Seal Joints J. Mach. Manuf. Reliab. Pub Date : 2023-12-18 O. A. Leonov, N. Zh. Shkaruba, L. A. Grinchenko, D. A. Pupkova, D. U. Khasyanova
-
Influence of Geometric Parameters of Rotary Working Elements on the Technological Indicators of Comminution of Cohesive Soil J. Mach. Manuf. Reliab. Pub Date : 2023-12-01
Abstract The methodology and results of theoretical and experimental studies of cutting elements of rotary-type working bodies for development and grinding of soils for the purpose of their subsequent strengthening with binding materials (cement, organic binders) during the construction of highways are provided. A stand for physical modeling of the working processes of machines of this type (roadmixer
-
Analysis of Technologies of Forming a Shaped Regular Texture on Friction Surfaces J. Mach. Manuf. Reliab. Pub Date : 2023-12-01
Abstract This article provides and considers an analysis of technologies aimed at forming shaped regular surface textures.
-
Welding with Pressure for Making Nuclear Reactor Components J. Mach. Manuf. Reliab. Pub Date : 2023-12-01
Abstract The principles of welding with pressure for making nuclear reactor components from refractory nickel alloys with limited weldability are presented. The main focus is placed on gasostatic diffusive welding with additional surface treatment (laser surface modification and profiling by machining). It is shown that the modification of welded surfaces allows making the breaking strength of the
-
Automated Control System for Transportation and Orientation of Canisters on a Conveyor J. Mach. Manuf. Reliab. Pub Date : 2023-12-01
Abstract This article discusses the issue of automating the process of transportation and orientation of canisters on a conveyor. The design of the mechanism for turning canisters on a conveyor has been developed; kinematic studies and strength analysis of the main units have been carried out. A 3D model of such a mechanism has been created, and the principle of its operation has been described. The
-
Increasing the Repair Efficiency of Clutch Plates by Development of an Appliance for the Adhesion of Friction Pads J. Mach. Manuf. Reliab. Pub Date : 2023-12-01
Abstract This article describes the design of an appliance for improvement of the technology for repairing elements of the clutch using composite polymer materials.
-
Transient Processes in the Power Circuit of DC Electric Locomotives with Traction Electric Motors J. Mach. Manuf. Reliab. Pub Date : 2023-12-01
Abstract The problem of increasing the reliability of transport units during maintenance and repair in the locomotive depot is considered. The transient processes in the power circuit of the DC electric locomotive with traction motors was studied and a calculation scheme of a DC electric locomotive with the series connected traction motors was presented. When considering the magnetization curve linearization
-
Structural Analysis of Parallel Mechanisms with a Circular Guide J. Mach. Manuf. Reliab. Pub Date : 2023-12-01
Abstract This article overviews known parallel mechanisms with a circular guide. The considered mechanisms are systemized in terms of kinematic chains and the motion pattern. The structural analysis of these mechanisms is performed using the mobility equations of kinematic chains.
-
Effect of Resonance-Wave Actions on Sedimentation Stability of Starch Nanoparticle Dispersions J. Mach. Manuf. Reliab. Pub Date : 2023-12-01
Abstract The influence of resonance wave effects on the sedimentation stability of potato and corn starch nanoparticle dispersions obtained by coprecipitation was studied. It has been established that the proportion of the dispersed phase of potato starch nanoparticle dispersions formed using traditional mixing remains unchanged for two days. For corn starch nanoparticle dispersions, this indicator
-
Method for Producing an Intermetallic Precursor Layer for Microarc Oxidation J. Mach. Manuf. Reliab. Pub Date : 2023-12-01
Abstract For the first time, a promising method for protecting the surface of metals and alloys from external high-temperature effects is proposed and substantiated experimentally by creating a functionally graded coating with a finishing ceramic layer and a precursor intermetallic layer. The technology of gas dynamic cold spraying of a mechanical mixture of powders based on aluminum valve metal with
-
Stresses in Beam Transitions of Main Gas Pipelines under Dynamic Loads J. Mach. Manuf. Reliab. Pub Date : 2023-12-01
Abstract The main dependences that make it possible to determine and evaluate the dynamic components of stresses and displacements in main gas pipelines under the action of a moving concentrated force are considered. The solution of the problem is given for single-span, two-span, and three-span beam transitions. According to the requirements of industry documents, decisions were made on the further
-
Scientific Foundations for the Aerohydrodynamic Grinding of Lignocellulosic Raw Material under Steam Explosion J. Mach. Manuf. Reliab. Pub Date : 2023-09-29 O. R. Ganiev, I. N. Grishnyaev, S. R. Ganiev, D. V. Kurminev
-
Application of Nonlinear Static Analysis to Evaluate the Side Rack Load Parameters of a Train Car Platform for Pipe Transportation J. Mach. Manuf. Reliab. Pub Date : 2023-09-29 N. L. Gurzhi, D. V. Kazakov
-
Dynamic Control of the Efficiency of Mechanic Cutting of Material J. Mach. Manuf. Reliab. Pub Date : 2023-09-29 A. V. Egorov, V. G. Shram, Yu. F. Kaizer, R. B. Zhelukevich, A. V. Lysyannikov, Yu. N. Bezborodov, A. V. Kuznetsov, A. V. Kuz’min
-
Maintaining Resonant Modes of Vibration Transport and Production Machines with Unbalance Vibration Exciters J. Mach. Manuf. Reliab. Pub Date : 2023-09-29 I. P. Lyan, G. Ya. Panovko, A. E. Shokhin
-
A Robotic Collector of Space Debris J. Mach. Manuf. Reliab. Pub Date : 2023-09-29 M. E. Barkova, A. O. Zhukov, I. N. Kartsan, V. O. Kuznetsova, D. V. Ulanov, I. N. Kravchenko, D. U. Khasyanova
-
Comparative Analysis of a Numerical Method and Machine Learning Methods of Temperature Determination of a Doped Lubricating Layer with Experimental Data J. Mach. Manuf. Reliab. Pub Date : 2023-09-29 A. Tokhmetova, A. Yu. Albagachiev
-
Thermal Control: Multifractal Distribution of Local Plastic Strains J. Mach. Manuf. Reliab. Pub Date : 2023-09-29 R. S. Akhmetkhanov
-
Some Features of Thermal Processes in Heating Systems with Woven Electric Heaters J. Mach. Manuf. Reliab. Pub Date : 2023-09-29 A. A. Shul’zhenko
-
Study of Wear Resistance of a Radial Bearing Covered by a Polymer Coating with an Axial Groove on a Nonstandard Base Surface J. Mach. Manuf. Reliab. Pub Date : 2023-09-29 D. U. Khasyanova, M. A. Mukutadze
-
Analysis of Survivability of Cast Railroad Parts under Operational Loading J. Mach. Manuf. Reliab. Pub Date : 2023-09-29 S. G. Lebedinskii, O. V. Barmina
-
Optimization of the Properties of Materials Based on Compressed Wood Used in the Structures of Oil-Field Machinery and Mechanisms J. Mach. Manuf. Reliab. Pub Date : 2023-09-29 A. Guliev, A. Sharifova, F. Yusubov
-
Centralized Restoration of Parts at the Enterprises of the Soyuzselkhoztekhnika and Goskomselkhoztekhnika Systems J. Mach. Manuf. Reliab. Pub Date : 2023-09-29 V. P. Lyalyakin, I. N. Kravchenko, V. M. Korneev
-
A Fracture Criterion with Biaxial Constraints of Deformations along the Front of a Normal Rupture Crack J. Mach. Manuf. Reliab. Pub Date : 2023-08-18 A. M. Pokrovskii, Yu. G. Matvienko
-
Role of the Pulse Current Duty Cycle during Titanium Tension J. Mach. Manuf. Reliab. Pub Date : 2023-08-18 V. V. Stolyarov
-
The Influence of Low-Temperature Plasma Modification on Contact Interactions of Cutting Tools J. Mach. Manuf. Reliab. Pub Date : 2023-08-18 N. S. Azikov, B. M. Brzhozovskii, D. V. Krainev, Zh. S. Tikhonova, Yu. L. Chigirinskii
-
The Influence of Temperature on the Mechanical Properties of the Surface Layer of a Radiationally Strengthened Fluoropolymer J. Mach. Manuf. Reliab. Pub Date : 2023-08-18 V. V. Alisin, A. Yu. Albagachiev, M. N. Erofeev, V. F. Yudkin
-
Vibrations of Periodic Systems Consisting of Identical Subsystems of an Arbitrary Structure J. Mach. Manuf. Reliab. Pub Date : 2023-08-18 L. Ya. Banakh, I. S. Pavlov
-
Durability Criterion for Lubricant Oils Alloyed with Micro/Nanoparticles of Insoluble Friction Modifiers J. Mach. Manuf. Reliab. Pub Date : 2023-08-18 A. Yu. Albagachiev, I. A. Buyanovskii, A. Tokhmetova
-
Application of a Pantographic Design Obtained by the Method of SLM Printing and Study of the Influence of Postprocessing with Application of Damping Coatings J. Mach. Manuf. Reliab. Pub Date : 2023-08-18 A. A. Zaitsev, S. S. Lopatin, T. T. Fozilov, A. V. Babaytsev
-
Development of Methods for Optimization and Machine Design of the Connecting Unit of Oil-Field Equipment J. Mach. Manuf. Reliab. Pub Date : 2023-08-18 M. S. Ragimova