样式: 排序: IF: - GO 导出 标记为已读
-
On color adjustment potential and color blending threshold of dental composite resins J. Esthet. Restor. Dent. (IF 3.2) Pub Date : 2024-03-16 Zs. M. Kovacs‐Vajna, J. Manauta, V. Tosco, M. Faccoli, F. Torricelli, L. Colalongo, A. Richelli, F. Autran, W. Devoto, A. Putignano
ObjectiveColor Adjustment Potential evaluates the color blending of dental Composite Resins. While Color Adjustment Potential is simple, its clinical relevance is unclear. This research aims to understand it better and to create an index for Composite Resins with meaningful clinical interpretation.Materials and MethodsSingle and double shade composite disks of various diameters and opacities were created
-
Effect of the type of application tip for 35% hydrogen peroxide on bleaching efficacy and tooth sensitivity: A randomized clinical trial J. Esthet. Restor. Dent. (IF 3.2) Pub Date : 2024-03-13 Gabrielle G. Centenaro, Michael W. Favoreto, Deisy C. F. Cordeiro, Fernanda N. Gumy, Amanda G. Machado, Gabriel D. Cochinski, Alessandra Reis, Alessandro D. Loguercio
ObjectivesEvaluate the bleaching efficacy (BE) and tooth sensitivity (TS) of in‐office bleaching using different application tips.MethodsForty‐eight participants were selected (split‐mouth), one to receive bleaching with an attached brush tip and one with a conventional tip. The procedure was performed with Whiteness Automixx Plus 35%. The BE was evaluated at the beginning, weekly, one and 12 months
-
Assessing push‐out bond strength in re‐irradiated teeth: Universal resin cement performance in self‐etch and self‐adhesive modes J. Esthet. Restor. Dent. (IF 3.2) Pub Date : 2024-03-13 Gabriel Hernandez Machado de Souza, Luiz Carlos de Lima Dias‐Junior, Renata Gondo Machado, Gabriela Pasqualin Ghidini, Mariana Comparotto Minamisako, Marcio Toshio Umeda Takashima, Nayara Cardoso Cábia, Ricardo Machado, Cleonice da Silveira Teixeira, Lucas da Fonseca Roberti Garcia
ObjectivesTo investigate the effect of cumulative doses of radiation on the pushout bond strength (BS) of a universal resin cement used in the self‐etch (SE) and self‐adhesive (SA) modes to the intraradicular dentin.Materials and MethodsForty‐eight human teeth were distributed into three groups (n = 16) according to the radiation therapy dose (RT): NoRT (no‐radiotherapy), 70RT (70 Gy), and 70 + 70RT
-
Clinical comparison of high‐viscosity glass‐hybrid systems with a sculptable bulk‐fill composite resin in different cavity types J. Esthet. Restor. Dent. (IF 3.2) Pub Date : 2024-03-13 Yakup Atmaca, Muhammet Karadas
ObjectiveThis randomized, double‐blind clinical investigation assessed the performance of two high‐viscosity glass‐ionomer systems and a bulk‐fill composite in different cavity types.Materials and MethodsIn 146 participants, 360 (class I, II, and V) cavities were restored using three different materials (Equia Forte HT, Chemfill Rock, and SonicFill 2) with equal allocation. Using modified World Dental
-
Effect of coffee staining and simulated oral hygiene methods on the color and translucency of a nanoceramic resin J. Esthet. Restor. Dent. (IF 3.2) Pub Date : 2024-03-06 Luiz Felipe Schneider, Bruna Mueller, Rubens Nisie Tango, Claudia Angela Maziero Volpato
ObjectiveEvaluate the color and translucency of a nanoceramic resin subjected to hygiene practices and immersion in coffee over time.Materials and MethodsSpecimens (n = 80, HT and LT, 0.5‐mm thick) of a nanoceramic resin were obtained and were divided in groups according to the simulated oral hygiene: no intervention (NT), brushing with an electric brush and water (BN), brushing with an electric brush
-
Effects of different surface treatments on surface topography and bond strength in the repair of fiber‐reinforced dentin composite J. Esthet. Restor. Dent. (IF 3.2) Pub Date : 2024-03-04 Nilay Bayraktar, Osman Tolga Harorli
ObjectiveThis study aimed to evaluate the effects of different surface treatments on the repair bond strength between a fiber‐reinforced dentin composite and a posterior composite.MethodsForty fiber‐reinforced dentin composite resin blocks (4 mm × 4 mm × 4 mm) were separated into eight groups (n = 5) according to the surface preparation methods: (G1) negative control group, (G2) adhesive application
-
-
In-vivo evaluation of the effects of short-term dehydration and rehydration on the color differences of immature permanent incisor teeth J. Esthet. Restor. Dent. (IF 3.2) Pub Date : 2024-02-24 Mehmet Buldur, Tuğba Misilli, Berkant Sezer
It is aimed to evaluate the color changes of upper central incisor teeth with different root maturation levels after 15 min of dehydration and rehydration.
-
Efficacy of a buccal and lingual at‐home bleaching protocol—A randomized, split‐mouth, single‐blind controlled trial J. Esthet. Restor. Dent. (IF 3.2) Pub Date : 2024-02-27 Heloisa Forville, Laís Giacomini Bernardi, Michael Willian Favoreto, Felipe Coppla, Taynara de Souza Carneiro, Fabiana Madalozzo Coppla, Alessandro D. Loguercio, Alessandra Reis
ObjectiveTo compare the color change, the risk and intensity of tooth sensitivity (TS), and gingival irritation (GI) of at‐home bleaching applied on the buccal surface only or the buccal and lingual surfaces.Materials and MethodsSixty patients with canines A2 or darker were selected and their superior arches were randomized in two groups: at‐home bleaching on the buccal‐only or on the buccal and lingual
-
Evaluation of surface microhardness and gingival marginal adaptation of three different bulk‐fill flowable resin composites: A comparative study J. Esthet. Restor. Dent. (IF 3.2) Pub Date : 2024-02-26 Nourhan Medhat Khairy, Naglaa Rizk Elkholany, Abeer Elsayed Elembaby
ObjectivesTo evaluate surface microhardness and gingival marginal adaptation of three different bulk‐fill flowable resin composites (FB‐RBCs) in Class V cavities with enamel or dentin margins before and after thermocycling (TMC).Materials and MethodsThree available FB‐RBCs were used; Palfique Bulk Flow (PaBF) (Tokuyama Dental), SDR Flow+ Bulk Fill Flowable (Dentsply Sirona), and I‐Flow Bulk Fill (I‐Dental)
-
Evaluation of marginal and internal adaptation of veneers generated by the guided prosthetic tooth preparation system J. Esthet. Restor. Dent. (IF 3.2) Pub Date : 2024-02-26 Shahad M. Abulhamael, Aikaterini Papathanasiou, Aikaterini Kostagianni, Shruti Jain, Matthew Finkelman, Carlos Fernando Mourão, Ala Ali
ObjectiveThis in vitro study aimed to assess and contrast the marginal and internal adaptation of all‐ceramic prefabricated veneers manufactured via the FirstFit guided tooth preparation system against all‐ceramic veneers produced using the chairside Computer‐Aided Design/Computer Aided Manufacture (CAD/CAM) system following identical guided preparation protocols.Materials and MethodsTwo main groups
-
Clinical performance of different bulk-fill composite resin systems in class II cavities: A 2-year randomized clinical trial J. Esthet. Restor. Dent. (IF 3.2) Pub Date : 2024-02-23 Badria Goda, Kareem Hamdi, Radwa I. Eltoukhy, Ashraf I. Ali, Salah Hasab Mahmoud
This study evaluated the clinical performance of bulk-fill resin composite systems with different viscosities in class II cavities.
-
Evaluating color change and hydrogen peroxide penetration in human and bovine teeth through in-office bleaching procedures J. Esthet. Restor. Dent. (IF 3.2) Pub Date : 2024-02-14 Michael Willian Favoreto, Deisy Cristina Ferreira Cordeiro, Gabrielle Gomes Centenaro, Leonardo Dal Bosco, Luis Alfonso Arana-Gordillo, Alessandra Reis, Alessandro D. Loguercio
Assess color alteration and hydrogen peroxide (HP) penetration in human and bovine teeth using various in-office bleaching protocols with different application times.
-
Is immediate dentin sealing a mandatory or optional clinical step for indirect restorations? J. Esthet. Restor. Dent. (IF 3.2) Pub Date : 2024-02-07 Fernando Freitas Portella, Raquel Müller, Roberto Zimmer, Eduardo Galia Reston, Guilherme Anziliero Arossi
The use of immediate dentin sealing (IDS) following tooth preparation for indirect restorations is well-supported by laboratory studies. The inclusion of IDS as a mandatory clinical step, it must be firmly supported by evidence from randomized clinical trials (RCT). The objective of this study is to assess whether IDS should be added as a mandatory procedure in all indirect restorations, taking into
-
Shear bond strength of universal adhesives to human enamel and dentin J. Esthet. Restor. Dent. (IF 3.2) Pub Date : 2024-02-03 Marco Jäggi, Sabrina Karlin, Nicola U. Zitzmann, Nadja Rohr
The composition of universal adhesives is highly diverse. The purpose of this in vitro study was to compare the shear bond strength of a composite with five different universal adhesives to human enamel and dentin.
-
A modified geometric technique to increase peri-implant keratinized mucosa J. Esthet. Restor. Dent. (IF 3.2) Pub Date : 2024-02-03 Chenxi Tang, Peng Zhang, Xiaohan Zhang, Lin Peng
The free gingival graft (FGG) has been identified as the most effective method for increasing keratinized mucosa width (KMW). However, the challenge emerges in cases of extensive keratinized mucosa deficiency, where efficient utilization of the patient's limited keratinized tissue to achieve optimal results is crucial. This article introduces a modified geometric technique to address this clinical
-
Correlation between patient satisfaction and color changes after tooth bleaching J. Esthet. Restor. Dent. (IF 3.2) Pub Date : 2024-02-01 Neng-wu Jiang, Yi-ling Cheng, Huo-lian Huang, Bing-jie Zhong, Wei Bi, Hao Yu
This study aimed to investigate the relationship between patient satisfaction of outcomes and tooth color changes during and after tooth bleaching.
-
Surgery-first in interdisciplinary class II cases J. Esthet. Restor. Dent. (IF 3.2) Pub Date : 2024-01-30 Raúl Ferrando Cascales, Francesca Casolari, Federico Hernández-Alfaro, Mayra Lucero Berdugo, Álvaro Ferrando Cascales
To present an interdisciplinary case treated with a surgery-first orthognathic approach, followed by orthodontic and prosthodontic treatment.
-
Agenesis of the maxillary permanent lateral incisors with the deciduous retained: Conservative and biomimetic approach using the BAIR technique J. Esthet. Restor. Dent. (IF 3.2) Pub Date : 2024-01-30 Luca Giachetti, Daniele Scaminaci Russo, Francesca Cinelli
Agenesis of the maxillary permanent lateral incisors is a condition that requires treatment aimed at improving the esthetics, even at an early age. However, traditional therapeutic protocols are long, invasive and have limitations and contraindications imposed by the age of the patient.
-
Accuracy of an intraoral scanner with near-infrared imaging feature in detection of interproximal caries of permanent teeth: An in vivo validation J. Esthet. Restor. Dent. (IF 3.2) Pub Date : 2024-01-24 Özlem Kanar, Dilek Tağtekin, Bora Korkut
This study aimed to evaluate the accuracy of an intraoral scanner with near-infrared imaging (NIRI) feature in the diagnosis of interproximal caries and to compare it with the visual-tactile method (VTM), bitewing radiography (BWR), and panoramic radiography (PR).
-
Dental treatment approaches of amelogenesis imperfecta in children and young adults: A systematic review of the literature J. Esthet. Restor. Dent. (IF 3.2) Pub Date : 2024-01-23 Miniar Rhaiem, Manel Chalbi, Soumaya Bousaid, Wiem Zouaoui, Mohamed Ali Chemli
The aim of this review was to compare various types of restorations used in children and young adults affected with amelogenesis imperfecta (AI) to determine the most effective restorative treatment.
-
A systematic and comprehensive protocol for rapid orthodontic extrusion J. Esthet. Restor. Dent. (IF 3.2) Pub Date : 2024-01-12 Mirjam Uravić Crljenica, Roberto Perasso, Monica Imelio, Chiara Viganoni, Lucia Pozzan
The aim of the present paper is to describe a systematic and detailed protocol for rapid orthodontic extrusion, and to summarize the main results of this protocol in terms of migration of dental, hard and soft tissues, for 10 cases.
-
Comparison between direct and indirect “digital image” dental visual shade matching considering the effect of clinical experience and gender J. Esthet. Restor. Dent. (IF 3.2) Pub Date : 2024-01-10 Moataz Makhloota, Ayşegül Köroğlu, Bilge Turhan Bal, Neslin Velioğlu
Shade matching is an essential procedure to obtain an esthetic prosthesis. The Direct Visual Shade Matching (DSM) method using shade guides is the most used method by dentists. However, The Indirect Visual Digital Shade Matching (ISM) method based on digital imaging is concerned to be reliable and useful in determining shade matching in dental practice. Several factors such as method, clinical experience
-
The radiopacity of single-shade composite resins: A comparative evaluation J. Esthet. Restor. Dent. (IF 3.2) Pub Date : 2024-01-10 Merve Ağaccıoğlu, Merve Nur Yılmaz
The aim of this study was to evaluate the radiopacity of single-shade composite resins with group and multi-shade composite resins via a digital image analysis.
-
Perio-prosthodontic pontic site management, part II: Pontic site reconstruction strategies to enhance the esthetic and biological outcomes J. Esthet. Restor. Dent. (IF 3.2) Pub Date : 2024-01-07 Ramon Gomez Meda, Jonathan Esquivel
Ridge deformities are present in most patients after tooth extraction; these defects make the management of future implant and pontic sites challenging to deal with. The restorative team should be able to diagnose and treat these deformities to allow for successful outcomes. Many approaches have been described to reconstruct pontic sites, each with specific indications. This article describes the different
-
Clinical performance of two ion-releasing bulk-fill composites in class I and class II restorations: A two-year evaluation J. Esthet. Restor. Dent. (IF 3.2) Pub Date : 2024-01-04 Eman H. Albelasy, Hamdi H. Hamama, Hooi Pin Chew, Marmar Montasser, Salah H. Mahmoud
This randomized clinical trial evaluated and compared the 2-year clinical performance of two ion-releasing bulk-fill composites (Cention N and Surefil One) with that of a conventional bulk-fill resin composite (Powerfil) in Class I and II cavities.
-
Implant-supported single all-ceramic crowns made from prefabricated (stock) or individualized CAD/CAM zirconia abutments: A 5 year randomized clinical trial J. Esthet. Restor. Dent. (IF 3.2) Pub Date : 2024-01-03 Julia-Gabriela Wittneben, Samir Abou-Ayash, Ardian Gashi, Daniel Buser, Urs Belser, Urs Brägger, Irena Sailer, Jelena Gavric
The aim of this randomized, prospective, and clinical multicenter study was to compare the overall clinical performance of two restorative options over a 5-year period: individualized CAD/CAM abutments veneered with a hand-layered ceramic, and prefabricated zirconium dioxide abutments veneered with press ceramic and inserted into a single edentulous gap in the anterior maxilla.
-
In-vivo repeatability of three intra-oral spectrophotometers J. Esthet. Restor. Dent. (IF 3.2) Pub Date : 2024-01-03 Vincent Hampé-Kautz, Tatiana Roman, Thibault Schwob, Bérangère Cournault, Olivier Etienne
The objective was to assess the repeatability of three spectrophotometers, based on the CIELCh factors and shadeguide reference measurements.
-
The fracture strength and the failure mode of lithium disilicate or resin nano ceramics as a crown, overlay, or endocrown restoration on endodontically treated teeth J. Esthet. Restor. Dent. (IF 3.2) Pub Date : 2023-12-28 Valentin Vervack, Camilla Johansson, Peter De Coster, Wietske Fokkinga, Evaggelia Papia, Stefan Vandeweghe
Different materials and restorative concepts have been proposed over the years to restore endodontically treated teeth (ETT). Monolithic ceramic and composite restoration can be lute to the tooh, without the use of a post. However, little is known how the material stiffness and presence of a composite core will affect the survival and failure mode.
-
Quo vadis, esthetic dentistry? Part II: Composite resin overtreatment and social media appeal J. Esthet. Restor. Dent. (IF 3.2) Pub Date : 2023-12-23 Ronaldo Hirata, Leandro Augusto Hilgert, Camila S. Sampaio, Oswaldo Scopin de Andrade, Ginger Melo, André V. Ritter
This article presents case reports highlighting over-treatments with resin composites, often misconceived as minimally invasive procedures.
-
Digital application of three-dimensional diagnosis and treatment with a virtual articulator J. Esthet. Restor. Dent. (IF 3.2) Pub Date : 2023-12-22 Kyungmin Clara Lee, Jae Hyun Park, Jong-Cheol Kim, Sangmi Lee, Danal Moon, Gye-Hyeong Lee
The purpose of this article was to introduce a method for the digital application of three-dimensional (3D) diagnosis and treatment with a virtual articulator and 3D data.
-
Clinical management of vital and non-vital discolored tooth preparation stump shades: A clinical case series J. Esthet. Restor. Dent. (IF 3.2) Pub Date : 2023-12-22 Stephen J. Chu, Adam J. Mieleszko
Traditional and modern-day laboratory techniques can be used to mask vital and non-vital discolored teeth.
-
In vitro comparison of one-step, two-step, and three-step polishing systems on the surface roughness and gloss of different resin composites J. Esthet. Restor. Dent. (IF 3.2) Pub Date : 2023-12-21 Vinícius Funghetto Lippert, Eduardo Bresciani, Eduardo Gonçalves Mota, Hélio Radke Bittencourt, Paulo Floriani Kramer, Ana Maria Spohr
This laboratory study evaluated the effect of three polishing systems on the surface roughness and gloss of resin composites.
-
Particle abrasion as a pre-bonding dentin surface treatment: A scoping review J. Esthet. Restor. Dent. (IF 3.2) Pub Date : 2023-12-21 Gabriela Almeida, Joana A. Marques, Bart Van Meerbeek, João Carlos Ramos, Rui I. Falacho
This scoping review aims to assess the influence of air abrasion with aluminum oxide and bioactive glass on dentin bond strength.
-
Effect of antioxidant on tooth sensitivity after bleaching J. Esthet. Restor. Dent. (IF 3.2) Pub Date : 2023-12-21 Mohamed Nabil, Mostafa Mohamed Hasan, Eman Abd Elghany Shebl
This study aimed to investigate the effect of antioxidant (sodium ascorbate) on tooth sensitivity after two in-office bleaching techniques (light-activated and chemical bleaching).
-
Does increasing vertical dimension of occlusion in centric relation affect muscular activity? An electromyographic study J. Esthet. Restor. Dent. (IF 3.2) Pub Date : 2023-12-18 Carlo E. Poggio, Daniele Manfredini
In many esthetic treatments, clinicians may consider the option to modify the maxillo mandibular position. A raise of the vertical dimension of occlusion (VDO) may help restore esthetics, increase the space for dental materials, and reduce the invasiveness of dental procedures. Traditionally, VDO increases are done by using the centric relation (CR) position. Despite a long history of use, the neuromuscular
-
Could bulk fill glass hybrid restorative materials replace composite resins in treating permanent teeth? A randomized controlled clinical trial J. Esthet. Restor. Dent. (IF 3.2) Pub Date : 2023-12-18 Fatma Üzümcü Uyumaz, Merve Abaklı İnci, Hazal Özer
This study aims to compare the clinical and radiographic efficacy of Equia system bulk fill glass hybrid material with composite resins in the permanent restoration of pediatric patients' permanent teeth.
-
The cantilever contact-point resin bonded bridge; adhesion 2.0 J. Esthet. Restor. Dent. (IF 3.2) Pub Date : 2023-12-12 Marco M. M. Gresnigt, Joyce A. Jonker, Stephan A. M. van der Made
When young patients are congenitally missing anterior teeth, different treatment modalities can be used to complement the dental arch. This article proposes a new treatment modality for the replacement of anterior teeth, the cantilever contact-point resin bonded bridge (CCP-RBB).
-
The impact of dental midline angulation towards the facial flow curve on the esthetics of an asymmetric face: Perspective of laypeople and orthodontists J. Esthet. Restor. Dent. (IF 3.2) Pub Date : 2023-12-07 Panagiotis Ntovas, Frantzeska Karkazi, Elvan-Onem Ozbilen, Juraj Lysy, Nikolaos Gogolas, Hanife-Nuray Yilmaz, Efstratios Papazoglou, Christian Coachman
The objective of the present article was to evaluate the ımpact of dental midline angulation in asymmetrical faces.
-
Optical properties of dental zirconia, bovine dentin, and enamel-dentin structures J. Esthet. Restor. Dent. (IF 3.2) Pub Date : 2023-12-07 Oscar E. Pecho, Paula Benetti, Javier Ruiz-López, Giordana P. Furini, Maria Tejada-Casado, María M. Pérez
To evaluate the optical properties and the relative translucency parameter of Ceramill ZI White (3Y-TZP) and Ceramill Zolid FX White (5Y-PSZ) zirconia ceramic systems and compare them with those of the bovine dentin and enamel/dentin structures.
-
Three-dimensional representation of the Vita Toothguide 3D-Master: An in vivo clinical study J. Esthet. Restor. Dent. (IF 3.2) Pub Date : 2023-12-06 Cristina Gómez-Polo, Javier Flores Fraile, Norberto Quispe López, Maria Portillo Muñoz, Maria Lobato, Javier Montero
The Vita Toothguide 3D-Master (Vita Zahnfabrik) is considered the dental shade guide in which the three dimensions of color – lightness, hue, and chroma – are most well-ordered in the CIELAB color space. No research has yet explored how well the Vita Toothguide 3D-Master is ordered in the 3D color space by recording color coordinates in vivo.
-
Considerations for predictable outcomes in static computer- aided implant surgery in the esthetic zone J. Esthet. Restor. Dent. (IF 3.2) Pub Date : 2023-11-29 Jovana Markovic, Juan Francisco Peña-Cardelles, Ignacio Pedrinaci, Adam Hamilton, German O. Gallucci, Alejandro Lanis
To provide technical and clinical recommendations for implementing a digital workflow in Static Computer-Aided Implant Surgery in the anterior maxilla.
-
Effect of natural agents on the bond strength to eroded dentin J. Esthet. Restor. Dent. (IF 3.2) Pub Date : 2023-11-28 Laryssa Karla Romano, Eduardo José Soares, Ayodele Alves Amorim, Rocio Geng Vivanco, Fernanda de Carvalho Panzeri Pires-de-Souza
This study evaluated the effect of bromelain and propolis extract on the bond strength (BS) of a universal adhesive system to eroded dentin.
-
The capacity of conservative preparations for lithium disilicate glass–ceramic laminates luted with different resin cements to mask different substrate shades: A minimally invasive esthetic approach J. Esthet. Restor. Dent. (IF 3.2) Pub Date : 2023-11-27 Samara Franco da Silva, Mylena de Araújo Régis, Carlos Eduardo Francci
Demonstrate the ability of 0.5 mm thickness lithium disilicate laminates associated with resin cement to mask different substrate saturations.
-
Minimally invasive CAD/CAM lithium disilicate partial-coverage restorations show superior in-vitro fatigue performance than single crowns J. Esthet. Restor. Dent. (IF 3.2) Pub Date : 2023-11-27 F. A. Spitznagel, L. S. Prott, J. S. Hoppe, T. Manitckaia, M. B. Blatz, Y. Zhang, R. Langner, P. C. Gierthmuehlen
To analyze the influence of restoration design (partial-coverage restoration vs. crown) and ceramic layer thickness on the performance and failure loads of CAD/CAM-fabricated lithium disilicate (LDS) reconstructions on molars after fatigue.
-
Use of both the diode and Er: YAG lasers in esthetic crown lengthening with the aid of digitally guided dual technique: 3 years follow-up J. Esthet. Restor. Dent. (IF 3.2) Pub Date : 2023-11-27 Carlos Guillermo Benítez, Luciane Hiramatsu Azevedo, Isabela Lopes Santos da Silva, Mirella de Oliveira Lima, Fernanda Yoshiko Yanai, Alexandre Hugo Llanos
To explore the feasibility of the usage of digital guides in combination with low- and high-power lasers for the treatment of excessive gingival display, also known as “gummy smile”.
-
Characterization of materials used for 3D printing dental crowns and hybrid prostheses J. Esthet. Restor. Dent. (IF 3.2) Pub Date : 2023-11-26 Pranit V Bora, Akram Sayed Ahmed, Aaron Alford, Kirsten Pitttman, Vinoy Thomas, Nathaniel C. Lawson
To compare the filler weight percentage (wt%), filler and resin composition, flexural strength, modulus, and hardness of several 3D-printed resins to direct and indirect restorative materials.
-
Precautions and possibilities in orthodontic treatment of periodontally compromised patients: Current recommendations J. Esthet. Restor. Dent. (IF 3.2) Pub Date : 2023-11-23 Sung-Hoon Han, Youngkyung Ko, Lyun Kwang Ham, Jae Hyun Park, Yoonji Kim
Orthodontic treatment plays a crucial role in achieving optimal dental esthetics and functional occlusion. However, when periodontally compromised patients are involved, additional precautions and considerations are critical. This article aims to provide up-to-date recommendations for the orthodontic treatment of periodontally compromised patients.
-
Evaluation of mechanical, optical, and fluoride-releasing properties of a translucent bulk fill glass hybrid restorative dental material J. Esthet. Restor. Dent. (IF 3.2) Pub Date : 2023-11-23 Maryam Moshaverinia, Luiza de Almeida Queiroz Ferreira, Greta Smidt, Kumar C. Shah, Sahar Ansari, Alireza Moshaverinia
Measure and compare the mechanical properties, translucency, and fluoride-releasing capabilities of EQUIA Forte HT against Fuji IX GP and ChemFil Rock.
-
Translucent monolithic zirconia titanium-supported FP1 full-arch prosthesis: A novel proof of concept to address esthetic, functional, and biologic challenges J. Esthet. Restor. Dent. (IF 3.2) Pub Date : 2023-11-17 Stavros Pelekanos, Panagiotis Ntovas, Vasiliki Rizou, Alessandro Pozzi
Despite the wide clinical use of translucent zirconia for full-arch implant prostheses, reduced flexural strength and fracture toughness compared with high-strength opaque zirconia needs to be addressed. A novel proof of concept for FP1 full-arch prosthesis featured by translucent monolithic zirconia and titanium framework was presented.
-
3D printing of ultra-thin veneers made of lithium disilicate using the LCM method in a digital workflow: A feasibility study J. Esthet. Restor. Dent. (IF 3.2) Pub Date : 2023-11-14 J. Schweiger, D. Edelhoff, O. Schubert
This article highlights the feasibility of the additive fabrication of ultra-thin veneers made of lithium disilicate using the lithography-based ceramic manufacturing (LCM) method.
-
-
Influence of universal adhesives and silane coupling primer on bonding performance to CAD-CAM resin-based composites: A laboratory investigation J. Esthet. Restor. Dent. (IF 3.2) Pub Date : 2023-11-11 Florin Eggmann, Francis K. Mante, Jose M. Ayub, Julián Conejo, Fusun Ozer, Markus B. Blatz
Obtaining strong resin bonds to computer-aided design and computer-aided manufacturing (CAD-CAM) resin-based composites with dispersed fillers (CCRBCs) poses a challenge. Therefore, this study aimed to assess the effect of three universal adhesives and a two-component silane coupling agent on the shear bond strength to three (CCRBCs).
-
The influence of different tooth proportions obtained using digital smile design on the perception of smile esthetics J. Esthet. Restor. Dent. (IF 3.2) Pub Date : 2023-11-11 Onur Dogan Dag, Isil Dagli, Aysegul Kurt
The aim of this study is to examine the effect of designs using different esthetic dental proportions made with a digital smile design program on the esthetic perception of individuals of different ages, genders and educational statuses.
-
Shedding light on the problem: Proficiency and maintenance practices of light-curing units among dental assistants J. Esthet. Restor. Dent. (IF 3.2) Pub Date : 2023-11-08 Eman H. Ismail, Afnan O. Al-Zain, Lamya S. Alghaith, Dana Alsenan, Fatin Ageel
Proper light curing is crucial for the success of restorative dentistry and to bond brackets to teeth, yet the responsibility is often delegated to dental assistants (DAs). This study assessed the proficiency and maintenance protocols of DAs when using light-curing units (LCUs) in Saudi Arabia.
-
Effects of the GingivalStat approach on early gingival margin remodeling following esthetic clinical crown lengthening: A case series J. Esthet. Restor. Dent. (IF 3.2) Pub Date : 2023-11-08 Francisco Salvador Garcia-Valenzuela, Leandro Chambrone
The aim of this case series is to present the potential applications of the GingivalStat approach, that is, the use of temporary gingival stabilizers, to favor early gingival margin remodeling and prevent the occurrence of gingival rebound following esthetic clinical crown lengthening.
-
Masking capacity of minimally invasive lithium disilicate restorations on discolored teeth—The impact of ceramic thickness, the material's translucency, and the cement color J. Esthet. Restor. Dent. (IF 3.2) Pub Date : 2023-11-07 Kevser Pala, Eva Maria Reinshagen, Thomas Attin, Jürg Hüsler, Ronald E. Jung, Alexis Ioannidis
To evaluate minimally invasive restorations' capacity to mask discolored teeth and explore the impact of ceramic thickness, translucency, and cement color.
-
Color stability of bleached tooth enamel brushed with different stain-removing toothpastes J. Esthet. Restor. Dent. (IF 3.2) Pub Date : 2023-11-07 Rintaro Sugai, Mikihiro Kobayashi, Yuiko Niizuma, Hiroyuki Mizukami, Masahiro Koyasu, Toshikazu Shiba, Nobuya Kitahara, Atsufumi Manabe
The effects of four toothpastes on the color stability of in-office bleached tooth specimens were determined.
-
Evaluation of the accuracy of direct intraoral scanner impressions for digital post and core in various post lengths: An in-vitro study J. Esthet. Restor. Dent. (IF 3.2) Pub Date : 2023-11-03 A. Almalki, J. Conejo, N. Kutkut, M. Blatz, Q. Hai, E. Anadioti
Despite the growing utilization of direct intraoral scanners (IOSs) in dentistry, there is a scarcity of research investigating their accuracy, specifically in post and core. Few studies have conducted comprehensive three-dimensional assessments and comparisons of IOSs with the conventional impression technique, particularly in different post space lengths.
-
Clinical evaluation of subgingival open sandwich restorations: 3-year results of a randomized double-blind trial J. Esthet. Restor. Dent. (IF 3.2) Pub Date : 2023-10-30 Hoda S. Ismail, Ashraf I. Ali, Rabab El. Mehesen, Franklin Garcia-Godoy, Salah H. Mahmoud
To provide a 3-year follow-up of previously treated patients to assess and compare the periodontal responses and clinical performance of proximal subgingival open sandwich restorations.