-
Effects of Surface Textures Created Using Additive Manufacturing on Shear Bond Strength Between Resin and Zirconia. J. Adhes. Dent. (IF 4.309) Pub Date : 2024-3-11 Kang Dai, Jiang Wu, Hai Yu, Zhe Zhao, Bo Gao
This investigation aimed to assess the impact of additive manufacturing-generated surface textures on zirconia bond strength.
-
75 Years Ago: Discovery of Resin Adhesion to Acid-etched Enamel - A Comparison of the 1949 and 1955 Methods. J. Adhes. Dent. (IF 4.309) Pub Date : 2024-3-11 Hans Jörg Staehle, Caroline Sekundo
This paper describes previously unknown details about the discovery of resin adhesion to acid-etched human enamel.
-
[Effect of a 10-Methacryloyloxydecyl Dihydrogen Phosphate- treated Bioceramic Sealer on the Bond Strength of an Endodontic Fiber Post: Multilayer Composite Disk Models and Ultra-highspeed Imaging Analysis]. J. Adhes. Dent. (IF 4.309) Pub Date : 2024-2-21 Chi-Hung Chen, Kuan-Han Lee, Ching-Chih Wei, Po-Yen Lin, Wan-Chuen Liao, Chih-Wen Chi, Alex S L Fok, Yu-Chih Chiang
Multiple materials are found in the root canal after fiber-post cementation. The layer of a bioceramic-based (BC) sealer may affect the bond strength (σBS) of the fiber post in the root canal. The purpose of this study was to employ multilayer compos-ite-disk models in diametral compression to investigate whether the bond strength between a fiber post and root dentin can be in-creased by the application
-
Multi-Parameter Characterization of HEMA/BPA-free 1- and 2-step Universal Adhesives Bonded to Dentin. J. Adhes. Dent. (IF 4.309) Pub Date : 2024-2-8 Chuliang Tang, Mohammed H Ahmed, Kumiko Yoshihara, Marleen Peumans, Bart Van Meerbeek
This study aimed to investigate the bonding effectiveness of two HEMA/BPA-free universal adhesives (UAs) to flat dentin, to characterize their adhesive-dentin interfacial ultrastructure, and to measure their water sorption (Wsp), water solubility (Wsl), and hydrophobicity.
-
Bond Strength, Microleakage, Microgaps, and Marginal Adaptation of Self-adhesive Resin Composites to Tooth Substrates with and without Preconditioning with Universal Adhesives. J. Adhes. Dent. (IF 4.309) Pub Date : 2024-2-8 Alaaeldin Elraggal, Islam Abdel Raheem, Ahmed Holiel, Abdulaziz Alhotan, Abdulrahman Alshabib, Nikolaos Silikas, David C Watts, Nada Alharbi, Rania R Afifi
This study investigated and compared the bond strengths, microleakage, microgaps, and marginal adaptation of self-adhesive resin composites (SAC) to dentin with or without universal adhesives.
-
Clinical Performance of Posterior Indirect Resin Composite Restorations with the Proximal Box Elevation Technique: A Prospective Clinical Trial up to 3 Years. J. Adhes. Dent. (IF 4.309) Pub Date : 2024-1-26 Burcu Gözetici-Çil, Funda Öztürk-Bozkurt, Gencay Genç-Çalışkan, Burcu Yılmaz, Nurcan Aksaka, Mutlu Özcan
The study evaluated the clinical performance of partial indirect resin composite (PIRC) restorations with "proximal box elevation" (PBE) placed in molars.
-
Comparison of Adhesion Performance of a Self-curing and a Light-curing Universal Adhesive to Various Dental Substrates and CAD/CAM Materials. J. Adhes. Dent. (IF 4.309) Pub Date : 2024-1-26 Cristina M P Vidal, Erica C Teixeira, Steven R Armstrong, Fang Qian
To compare the adhesion of a self-curing (Tokuyama Universal Bond, TUB) and a light-curing (Scotchbond Universal, SBU) universal adhesive to CAD/CAM materials, enamel, and dentin. This study also assessed differences in enamel adhesion between self-etch vs selective etching modes, as well as immediate and long-term adhesion to dentin for both adhesives.
-
Bond Strength to Lithium-Disilicate Ceramic after Different Surface Cleaning Approaches. J. Adhes. Dent. (IF 4.309) Pub Date : 2024-1-19 Federico Del Bianco, Claudia Mazzitelli, Tatjana Maravic, Uros Josic, Federica Florenzano, Paolo Baldissara, Lorenzo Breschi, Annalisa Mazzoni
To evaluate the effect of different lithium-disilicate (LiSi) glass-ceramic surface decontamination procedures on the shear bond strength (SBS) to resin cement.
-
High C-Factor Cavities: How Do "Snowplow Technique", Adhesive Application Mode and Aging Influence the Microtensile Bond Strength to Dentin? J. Adhes. Dent. (IF 4.309) Pub Date : 2024-1-15 Robert Tee, Kirstin Vach, Nadine Schlueter, Silke Jacker-Guhr, Anne-Katrin Luehrs
To investigate the microtensile bond strength (µTBS) to dentin in class-I cavities using different layering techniques, adhesive application modes, and aging.
-
Long-term Evaluation of Dentin Bonding Properties of the Photoinitiator System Contained in Universal Adhesives Used in Fiber-Post Luting Procedures. J. Adhes. Dent. (IF 4.309) Pub Date : 2023-12-20 Pedro Henrique de Aguiar Moreira, Patrick Pereira Garcia, Myrella do Nascimento Correia, Narla Dos Reis Bacelar Chaves, Camilo Pulido, Michel Wendlinger Cantanhede Ferreira, Alessandra Reis, Fabiana Suelen Figuerêdo de Siqueira, Alessandro D Loguercio, Andres Felipe Millan Cardenas
This study evaluated the long-term push-out bond strength (PBS) and nanoleakage (NL) of universal adhesives with different photo-initiator systems in the root canals of teeth in which fiber posts were luted.
-
Effect of Hydrofluoric Acid Concentration on Bond Strength to Glass-Ceramics: A Systematic Review and Meta-Analysis of In-Vitro Studies. J. Adhes. Dent. (IF 4.309) Pub Date : 2023-11-17 Vitaliano Gomes de Araújo-Neto, Caio Felipe de Almeida Nobre, Mariana Itaborai Moreira Freitas, Renally Bezerra Wanderley Lima, Mario Alexandre Coelho Sinhoreti, Altair Antoninha Del Bel Cury, Marcelo Giannini
To conduct a systematic review and meta-analysis of in-vitro bond strength to glass-ceramics using hydrofluoric acid (HF) at lower (<5%) and higher (>5%) concentrations ([HF]) to treat ceramic surfaces.
-
Adhesive Performance Assessment of Universal Adhesives and Universal Adhesive/Composite Cement Combinations. J. Adhes. Dent. (IF 4.309) Pub Date : 2023-11-17 Chuliang Tang, Ben Mercelis, Mohammed H Ahmed, Kumiko Yoshihara, Marleen Peumans, Bart Van Meerbeek
To investigate the bonding performance of three universal adhesives (UAs) to dentin and the effect of different curing modes and hydrofluoric-acid (HF) etching of lithium-disilicate glass-ceramic on the adhesive performance of two UA/composite cement (CC) combinations.
-
The Effect of Bonding Strategy and Aging on Adhesion to Primary Enamel: An In-Vitro Study. J. Adhes. Dent. (IF 4.309) Pub Date : 2023-10-16 Antonín Tichý, Yi Yang, Mahmoud Sayed, Yasushi Shimada, Keiichi Hosaka
Resin composites are commonly used in pediatric dentistry, but there is limited evidence on adhesion to primary teeth, especially primary enamel. In this study, three bonding strategies were assessed - one-step self-etch (1-SE), two-step self-etch (2-SE), and three-step etch-and-rinse (3-ER) - by measuring the immediate and aged microshear bond strength (µSBS) to sound primary enamel.
-
New Methods for Replacing Single Missing Teeth with Non-prep Bridges (NPBs) - A Case Series. J. Adhes. Dent. (IF 4.309) Pub Date : 2023-10-16 Hans Jörg Staehle
Newly developed non-invasive methods for replace a missing tooth and closing single-tooth gaps in the poster- ior region using resin composite are presented.
-
Digitally Guided Direct Composite Injection Technique with a Bi-layer Clear Mini-Index for the Management of Extensive Occlusal Caries in a Pediatric Patient: A Case Report. J. Adhes. Dent. (IF 4.309) Pub Date : 2023-10-16 Keiichi Hosaka, Antonin Tichy, Monica Yamauti, Keiichiro Watanabe, Kohei Kamoi, Kazuhide Yonekura, Richard Foxton, Masatoshi Nakajima
This case report presents a direct composite inverse injection technique using a bi-layer clear mini-index fabricated with a digital workflow to restore extensive posterior occlusal cavities in a 13-year-old patient.
-
Randomized Clinical Split-Mouth Study on Partial Ceramic Crowns Luted with a Self-adhesive Resin Cement with or without Selective Enamel Etching: Long-Term Results after 15 Years. J. Adhes. Dent. (IF 4.309) Pub Date : 2023-10-6 Julia L Pfister, Marianne Federlin, Karl-Anton Hiller, Gottfried Schmalz, Wolfgang Buchalla, Fabian Cieplik, Konstantin J Scholz
This follow-up of a randomized clinical split-mouth study aimed to investigate the influence of selective enamel etching on the long-term clinical performance of partial ceramic crowns (PCCs) luted with a self-adhesive resin cement.
-
Impact of Shelf-Life Simulation on a Self-Adhesive Composite: Polymerization Kinetics, Chemical and Color Stability. J. Adhes. Dent. (IF 4.309) Pub Date : 2023-9-19 Helena Seoane, Filipa Chasqueira, Ana Mano Azul, Mário Polido, António Hs Delgado
To determine the polymerization kinetics and color stability of a self-adhesive and conventional resin composite after accelerated shelf-life simulation.
-
Preheated Composite as an Alternative for Bonding Feldspathic and Hybrid Ceramics: A Microshear Bond Strength Study. J. Adhes. Dent. (IF 4.309) Pub Date : 2023-8-8 Manassés Tercio Vieira Grangeiro, Camila da Silva Rodrigues, Natalia Rivoli Rossi, Karina Barbosa Souza, Renata Marques de Melo, Marco Antonio Bottino
To evaluate the bond strength between alternative or conventional luting agents and indirect restorative materials.
-
Fourteen-year Clinical Performance of a HEMA-free One-step Self-etch Adhesive in Non-carious Cervical Lesions. J. Adhes. Dent. (IF 4.309) Pub Date : 2023-7-12 Marleen Peumans, Ellen Van de Maele, Jan de Munck, Kirsten van Landuyt, Bart Van Meerbeek
This randomized controlled trial aimed to evaluate the 14-year clinical performance of a HEMA-free 1-step self-etch adhesive (1SEa) compared with that of a 3-step etch-and-rinse adhesive (3E&Ra).
-
Three-year Clinical Performance of a Universal Adhesive in Non-Carious Cervical Lesions. J. Adhes. Dent. (IF 4.309) Pub Date : 2023-6-30 Marleen Peumans, Stefanie Vandormael, Iris De Coster, Jan De Munck, Bart Van Meerbeek
The aim of this randomized controlled clinical trial was to evaluate the 3-year clinical performance of a universal adhesive (Clearfil Universal Bond Quick (CUBQ); Kuraray Noritake) when restoring non-carious cervical lesions (NCCLs) using two different application modes (etch-and-rinse vs self-etch with prior selective enamel etching).
-
Short-fiber Reinforced MOD Restorations of Molars with Severely Undermined Cusps. J. Adhes. Dent. (IF 4.309) Pub Date : 2023-4-25 Pascal Magne, Taban Milani
To assess the mechanical performance and enamel-crack propensity of large MOD composite-resin restorations on maxillary molars with severely undermined cusps.
-
Marginal Quality and Wear of Bulk-fill Materials for Class-II Restorations in Primary Molars. J. Adhes. Dent. (IF 4.309) Pub Date : 2023-4-25 Maria Hofmann, Stefanie Amend, Susanne Lücker, Roland Frankenberger, Bernd Wöstmann, Norbert Krämer
The aim of this in-vitro study was to evaluate the marginal integrity and wear of eight bulk-fill materials in comparison to a compomer in Class-II cavities in primary molars after thermomechanical loading (TML).
-
A Three-step Etch-and-Rinse vs a Universal Adhesive in Nanohybrid Composite Anterior Restorations: A Retrospective Clinical Evaluation. J. Adhes. Dent. (IF 4.309) Pub Date : 2023-4-24 Allegra Comba, Andrea Baldi, Massimo Carossa, Gaetano Paolone, Ilaria Stura, Giuseppe Migliaretti, Nicola Scotti
To retrospectively evaluate the clinical behavior of direct anterior composite restorations performed with a universal adhesive or with a three-step etch-and-rinse (E&R) adhesive.
-
Posterior Dahl: A Minimally Invasive Method for the Treatment of Localized Posterior Tooth Wear. J. Adhes. Dent. (IF 4.309) Pub Date : 2023-1-27 Pauline M J Hoekstra-van Hout, Jan G J H Schols, Shamir B Mehta, Niek J M Opdam, Tatiana Pereira Cenci, Bas A C Loomans
This retrospective case series of 9 patients aimed to describe clinical outcomes and patient satisfaction following the implementation of the posterior Dahl concept to manage localized posterior tooth wear.
-
15-Methacryloyloxypentadecyl Dihydrogen Phosphate Improves Resin-to-Zirconia Bonding Durability. J. Adhes. Dent. (IF 4.309) Pub Date : 2023-1-24 Zhi-Cen Lu, Ling-Hui Jia, Zhi-Feng Zheng, Hao Yu
To investigate the bond durability of composite cement to zirconia after treatment with a 15-methacryloyloxypentadecyl dihydrogen phosphate (15-MPDP)-containing adhesive and 2 commercially available adhesives.
-
Evaluation of the Bond Strength of Polyetherketoneketone to Dental Ceramic. J. Adhes. Dent. (IF 4.309) Pub Date : 2022-12-24 Bahar Tekli, Gulfem Ergun
To evaluate the efficacy of different surface treatments on the bond strength of polyetherketoneketone (PEKK) to ceramic materials.
-
Contamination of Dentin with Hemostatic Agents - Is EDTA a Valuable Decontaminant before Using a Self-etch Universal Adhesive? J. Adhes. Dent. (IF 4.309) Pub Date : 2022-9-29 Carolin Anne Mempel, Silke Jacker-Guhr, Anne-Katrin Lührs
To investigate the effects of dentin decontamination procedures with ethylenediaminetetraacetic acid (EDTA) after contamination with two hemostatic agents, ViscoStat (VS) and ViscoStat Clear (VSC), on the microtensile bond strength (μTBS) of two different universal adhesives, before and after thermocycling (TC).
-
Polymerization Kinetics, Shrinkage Stress, and Bond Strength to Dentin of Conventional and Self-adhesive Resin Cements. J. Adhes. Dent. (IF 4.309) Pub Date : 2022-9-29 Gabriel Nima, Patricia Makishi, Bruna Marin Fronza, Paulo Vitor Campos Ferreira, Roberto Ruggiero Braga, André Figueiredo Reis, Marcelo Giannini
To evaluate the kinetics of polymerization and shrinkage stress of resin cements, as well as their bond strength to dentin after 24-h or one-year water storage.
-
Retrospective Clinical Evaluation of Subgingival Composite Resin Restorations with Deep-Margin Elevation. J. Adhes. Dent. (IF 4.309) Pub Date : 2022-8-20 Clara Muscholl, Nadja Zamorska, Kyrill Schoilew, Caroline Sekundo, Christian Meller, Christopher Büsch, Diana Wolff, Cornelia Frese
To evaluate the long-term clinical quality of subgingivally placed composite resin restorations and the inflammatory status of surrounding supracrestal gingival and periodontal tissues.
-
Effect of Adhesive Resin Application on the Durability of Adhesion to CAD/CAM Glass-Ceramics after either Hydrofluoric Acid Etching or Self-etch Primer Application. J. Adhes. Dent. (IF 4.309) Pub Date : 2022-8-19 Taciana Emília Leite Vila-Nova, Dayanne Monielle Duarte Moura, Gabriela Monteiro de Araújo, Rafael de Almeida Spinelli Pinto, Fabíola Pessôa Pereira Leite, Renata Marques Melo, Mutlu Özcan, Rodrigo Othávio de Assunção E Souza
To evaluate the effect of two surface conditioning methods, namely conventional hydrofluoric acid vs self-etching primer, and the application of adhesive on the bond strength of resin cement to CAD/CAM glass-ceramics.
-
Cause-Effect Relationship of Varying Bonding Thicknesses in Dentin Adhesion of Universal Adhesives. J. Adhes. Dent. (IF 4.309) Pub Date : 2022-8-19 Arefin Alam, Abu Faem Mohammad Almas Chowdhury, Monica Yamauti, Pipop Saikaew, Shuhei Hoshika, Ricardo Marins Carvalho, Hidehiko Sano, Sharanbir K Sidhu
To evaluate whether varying thicknesses of universal adhesives utilizing the additional coating strategy would affect their microtensile bond strength (µTBS) to dentin, hardness, and elastic modulus (mechanical properties).
-
Do Self-adhesive Resin Composites Release More Monomers? A Comparative High-performance Liquid Chromatographic Analysis. J. Adhes. Dent. (IF 4.309) Pub Date : 2022-8-19 Loulwa M Al-Saud, Alhassan H Aodah, Omar A Abu Asab
To comparatively evaluate the elution of residual monomers (bis-GMA, bis-EMA, TEG-DMA, and HEMA) from two self-adhesive flowable resin composites, a giomer, and a nano-flowable resin composite over five different time intervals, using high-performance liquid chromatography (HPLC).
-
Clinical Performance of a "No Wait" Universal Adhesive in Noncarious Cervical Lesions: A Two-year Randomized Controlled Clinical Trial. J. Adhes. Dent. (IF 4.309) Pub Date : 2022-8-19 Fatma Dilsad Oz, Meltem Nermin Dursun, Esra Ergin
To evaluate the 24-month clinical performance of a "no wait" universal adhesive with different application modes in comparison with an etch-and-rinsew and two-step self-etch adhesive in non-carious cervical lesions (NCCLs).
-
Effect of Light Emission Through an Optical Fiber Device on the Bond Strength of a Hollow Experimental Intraradicular Post. J. Adhes. Dent. (IF 4.309) Pub Date : 2022-8-19 Cristiane Mayumi Inagati, Manassés Tercio Vieira Grangeiro, Natália Rivoli Rossi, João Paulo Mendes Tribst, Leonardo Jiro Nomura Nakano, Paula Carolina Komori de Carvalho, Tarcisio José de Arruda Paes Junior
To evaluate the effect of irradiation with an optical-fiber device on the bond strength of hollow and partially opaque intraradicular posts.
-
Influence of Adhesion Promoter Primers on Polymerization Kinetics and Long-term Bond Strength of Composite Cements to Zirconia. J. Adhes. Dent. (IF 4.309) Pub Date : 2022-6-21 Bruna Marin Fronza, Mayara Dos Santos Noronha, Richard Bengt Price, Vanessa Gallego Arias Pecorari, Marcelo Giannini
To investigate the influence of primers on polymerization kinetics of resin-based luting and its effect on the microhardness and bond strength to zirconia. Materials and Methods: Panavia V5 (PV; Kuraray Noritake) with Tooth Primer (TPprimer; Kuraray Noritake) or Clearfil Ceramic Primer (CPprimer; Kuraray Noritake), and RelyX Ultimate (RU; 3M Oral Care) with Scotchbond Universal (SUadhesive; 3M
-
MTA Matrix Technique: Restoration of Teeth with Deep Subgingival Defects Extending Down to the Osseous Crest. J. Adhes. Dent. (IF 4.309) Pub Date : 2022-6-21 Johannes Mente, Fabian Hieber, Caroline Sekundo, Doroth Ee Laura Schuessler, Holger Gehrig
To present a new restorative technique for the restoration of teeth with deep subgingival hard tissue defects extending down to the osseous crest without additional surgical or orthodontic interventions by combining mineral trioxide aggregate (MTA) and composite material.
-
Surface Treatments and Adhesives Used to Increase the Bond Strength Between Polyetheretherketone and Resin-based Dental Materials: A Scoping Review. J. Adhes. Dent. (IF 4.309) Pub Date : 2022-5-17 Pablo Soares Machado, Ana Carolina Cadore Rodrigues, Eduardo Trota Chaves, Alexandre Henrique Susin, Luiz Felipe Valandro, Gabriel Kalil Rocha Pereira, Marília Pivetta Rippe
To identify and discuss the available surface treatments and adhesives for polyetheretherketone (PEEK) to increase its bond strength to resin-based materials used in dentistry.
-
Marginal Adaptation of Flowable vs Sonically Activated or Preheated Resin Composites in Cervical Lesions. J. Adhes. Dent. (IF 4.309) Pub Date : 2022-5-17 Danica Scepanovic, Matej Par, Thomas Attin, Tobias T Tauböck
To investigate marginal integrity of restorations applied with preheated and non-preheated composite, flowable composite, sonically activated composite, and a new thermo-viscous bulk-fill composite using near-infrared technology for preheating, in class V cavities of human molars.
-
Application of Sulfinate Agent in Conjunction with HOCl Smear-Layer Deproteinization Improves Dentin Bonding Durability of One-step Self-etch Adhesives. J. Adhes. Dent. (IF 4.309) Pub Date : 2022-4-15 Kittisak Sanon, Antonin Tichy, Ornnicha Thanatvarakorn, Taweesak Prasansuttiporn, Kazuhide Yonekura, Keiichi Hosaka, Masayuki Otsuki, Masatoshi Nakajima
To evaluate the effect of a sulfinate agent on the bonding durability of one-step self-etch adhesives (1-SEAs) to smear-layer-covered dentin deproteinized with hypochlorous acid (HOCl).
-
Does Adhesive Luting Reinforce the Mechanical Properties of Dental Ceramics Used as Restorative Materials? A Systematic Review and Meta-Analysis. J. Adhes. Dent. (IF 4.309) Pub Date : 2022-4-14 Lucas Saldanha da Rosa, Kiara Serafini Dapieve, Fernanda Dalla-Nora, Marília Pivetta Rippe, Luiz Felipe Valandro, Rafael Sarkis-Onofre, Gabriel Kalil Rocha Pereira
This systematic review aims to explore and compile the effect of adhesive luting on the mechanical properties of dental ceramics used as restorative materials.
-
Interfacial Characterization of a Conventional Glass-Ionomer Cement after Functioning for 1-year In Vivo. J. Adhes. Dent. (IF 4.309) Pub Date : 2022-4-14 Shuhei Hoshika, Kenichi Koshiro, Satoshi Inoue, Toru Tanaka, Hidehiko Sano, Sharanbir K Sidhu
To morphologically evaluate the interface between a conventional glass-ionomer cement (GIC) and dentin one day after placement, as well as the changes at the interface after one year of aging/functioning in monkey teeth.
-
Effect of Incorporation of Bioactive Glass-Ceramic into Self-etch Adhesives. J. Adhes. Dent. (IF 4.309) Pub Date : 2022-4-14 Fernanda de Carvalho Panzeri Pires-de-Souza, Rafaella Tonani-Torrieri, Rocio Geng Vivanco, Carolina Noronha Ferraz de Arruda, Saulo Geraldeli, Mário Alexandre Coelho Sinhoreti, Jean-Francois Roulet
This study evaluated the effect of incorporating different concentrations of biosilicate in an experimental self-etch adhesive (SE).
-
Rehabilitation of Worn Dentition with CAD-CAM Restorations: A Case Report. J. Adhes. Dent. (IF 4.309) Pub Date : 2022-4-14 Cees M Kreulen, Luuk A M J Crins, Niek J M Opdam, Bas A C Loomans
To describe the digital workflow applied for restoring a severely worn dentition with minimally invasive CAD/CAM resin nano-composite restorations.
-
Which Zirconia Surface-cleaning Strategy Improves Adhesion of Resin Composite Cement after Saliva Contamination? A Systematic Review and Meta-Analysis. J. Adhes. Dent. (IF 4.309) Pub Date : 2022-4-14 Nathalia Ramos da Silva, Gabriela Monteiro de Araújo, Taciana Emília Leite Vila-Nova, Marcela Guedes Pereira Gouvêa Bezerra, Patrícia Dos Santos Calderon, Mutlu Özcan, Rodrigo Othávio de Assunção E Souza
To identify the most effective cleaning method for saliva-contaminated zirconia surface before adhesive cementation through a systematic review and meta-analysis.
-
OCT Evaluation of Marginal and Internal Interface Integrity of Class V Composite Restorations after 36 to 48 Months. J. Adhes. Dent. (IF 4.309) Pub Date : 2022-4-14 Rainer Haak, Philip Schäfer, Bettina Hanßen, Dirk Ziebolz, Kyung Jin Park, Matthias Häfer, Gerhard Schmalz, Hartmut Schneider
To compare a self-etch and a two-step etch-and-rinse adhesive in terms of internal and marginal composite-tooth bond failure separately on enamel and dentin/cement at 36-48 months after restoration placement using optical coherence tomography (OCT).
-
Incorporation of a β-AgVO3 Semiconductor in Resin Cement: Evaluation of Mechanical Properties and Antibacterial Efficacy. J. Adhes. Dent. (IF 4.309) Pub Date : 2022-4-14 Simone Kreve, André Luís Botelho, Mariana Lima da Costa Valente, Luciano Bachmann, Marco Antônio Schiavon, Andréa C Dos Reis
This in vitro study aimed to investigate the effect of incorporating the semiconductor nanostructured silver vanadate decorated with silver nanoparticles (β-AgVO3) in a dual-cure resin cement on the degree of conversion (DC), microhardness, roughness, color, adhesion properties before and after artificial aging, and antimicrobial efficacy.
-
Interfacial Fracture Energy Between New Translucent Zirconias and a Resin Cement. J. Adhes. Dent. (IF 4.309) Pub Date : 2022-4-14 Laura Patricia Ortiz Nadal, Nathália de Carvalho Ramos, João Paulo Mendes Tribst, Lilian Costa Anami, Renata Marques de Melo, Marco Antonio Bottino
To determine the interfacial fracture energy (IFE) and stress distribution of Brazil-nut-shaped specimens made of translucent zirconia and resin cement.
-
Influence of Dentin Surface Roughness, Drying Time, and Primer Application on Self-adhesive Composite-Cement Bond Strength. J. Adhes. Dent. (IF 4.309) Pub Date : 2022-4-14 Sung-Ae Son, Bit-Na Kim, Jae-Hoon Kim, Deog-Gyu Seo, Jeong-Kil Park
To investigate the effect of roughness and drying time of dentin as well as the number of coats of a self-adhesive composite-cement primer on the bond strength of self-adhesive composite cement.
-
Effects of Hydrofluoric Acid Concentration and Etching Time on the Bond Strength to Ceramic-coated Zirconia. J. Adhes. Dent. (IF 4.309) Pub Date : 2022-3-25 Chunxiao Jin, Jingrong Wang, Yutian Huang, Ping Yu, Yuhuan Xiong, Haiyang Yu, Shanshan Gao
To evaluate the effects of different hydrofluoric acid (HF) concentrations and etching times on the surface topography, roughness, and resin bond strength to ceramic-coated zirconia (CC), and to compare them with the effects of alumina air-abrasion combined with 10-MDP (AA).
-
Enhancement of Adhesive Bonding Properties of Polyetheretherketone-based Materials using Plasma Surface Modifications. J. Adhes. Dent. (IF 4.309) Pub Date : 2022-3-25 Canan Akay, Natiga İsrafil, Suat Pat
To investigate the effects of plasma surface treatments and methyl methacrylate-based adhesives on polyetheretherketone.
-
Prospective Study on CAD/CAM Nano-Ceramic (Composite) Restorations in the Treatment of Severe Tooth Wear. J. Adhes. Dent. (IF 4.309) Pub Date : 2022-3-25 Luuk A M J Crins, Niek J M Opdam, Cees M Kreulen, Bernadette A M M Sterenborg, Ewald M Bronkhorst, Wietska A Fokkinga, Marie-Charlotte D N J M Huysmans, Bas A C Loomans
The aim of this prospective study was to evaluate the clinical performance of minimally invasive, CAD/CAM nano-ceramic (composite) restorations in patients with severe tooth wear, the effect of the restorative treatment on the oral health-related quality of life (OHRQoL), and the etiology of tooth wear as a risk factor for restoration failure.
-
Evaluation of Fiber Post Adhesion to Root Dentin Achieved with Different Composite Cements: 1-year In Vitro Results. J. Adhes. Dent. (IF 4.309) Pub Date : 2022-3-25 Uros Josic, Claudia Mazzitelli, Tatjana Maravic, Allegra Comba, Eric Mayer-Santos, Federica Florenzano, Lorenzo Breschi, Annalisa Mazzoni
To evaluate push-out bond strength (PBS) and interfacial nanoleakage (NL) of adhesively luted fiber posts using different composite cements and polymerization protocols.
-
Effect of Clinically Relevant Smear Layers and pH of Universal Adhesives on Dentin Bond Strength and Durability. J. Adhes. Dent. (IF 4.309) Pub Date : 2022-3-25 Hüseyin Hatırlı, Kaan Yerliyurt
To evaluate the effects of different smear layers on the microtensile bond strength (µTBS) of a reference two-step self-etch adhesive and two universal adhesives.
-
Clinical Performance of Direct Composite Restorations in Patients with Amelogenesis Imperfecta - Anterior Restorations. J. Adhes. Dent. (IF 4.309) Pub Date : 2022-3-25 Neslihan Tekçe, Mustafa Demirci, Safa Tuncer, Gizem Güder, Elif Ilgi Sancak
To evaluate the clinical performance of direct composite restorations using nanohybrid and nanofill composite materials in anterior teeth in patients with amelogenesis imperfecta (AI).
-
Bond Durability of a Repaired Resin Composite Using a Universal Adhesive and Different Surface Treatments. J. Adhes. Dent. (IF 4.309) Pub Date : 2022-3-10 Jitrlada Chuenweravanich, Watcharaporn Kuphasuk, Pipop Saikaew, Vanthana Sattabanasuk
To evaluate the long-term effect of different surface treatments on the repair microtensile bond strength (µTBS) of resin composite using a universal adhesive.
-
Influence of Simulated Oral Conditions on Different Pretreatment Methods for the Repair of Glass-Ceramic Restorations. J. Adhes. Dent. (IF 4.309) Pub Date : 2022-3-2 Benedikt Höller, Renan Belli, Anselm Petschelt, Ulrich Lohbauer, José Ignacio Zorzin
The present study investigated the influence of simulated intraoral conditions (increased temperature and humidity) on two different surface pretreatment methods to repair a lithium-disilicate glass-ceramic (LDS).
-
Dimethyl Sulfoxide Dentin Pretreatments Do Not Improve Bonding of a Universal Adhesive in Etch-and-Rinse or Self-etch Modes. J. Adhes. Dent. (IF 4.309) Pub Date : 2022-3-2 Rodrigo Mafra Magalhães de Mello, Bárbara Albertini Roquim Alcântara, Fabiana Mantovani Gomes França, Flávia Lucisano Botelho do Amaral, Roberta Tarkany Basting
To evaluate the influence of dimethyl sulfoxide (DMSO) solutions used as dentin pretreatments on microtensile bond strength (µTBS), as well as the dentin/restoration interface micromorphology of a universal adhesive in etch-and-rinse or self-etch mode.
-
Effect of Grinding and Regenerative Heat Treatment on the Fracture Resistance of a Zirconia/Porcelain Veneer Interface. J. Adhes. Dent. (IF 4.309) Pub Date : 2022-3-2 Lucas Miguel Candido, Eduardo Bellini Ferreira, Lígia Antunes Pereira Pinelli
To experimentally assess the effect of regenerative heat treatment (HT) on yttria-stabilized tetragonal zirconia polycrystalline ceramic (Y-TZP) to guarantee veneer adhesion strength.
-
Bonding of Glass-Ionomer Cement and Adhesives to Silver Diamine Fluoride-treated Dentin: An Updated Systematic Review and Meta-Analysis. J. Adhes. Dent. (IF 4.309) Pub Date : 2022-3-2 Tatiana Tambara Fröhlich, Graziela Botton, Rachel de Oliveira Rocha
To evaluate through a systematic review and meta-analysis the bonding performance of adhesive materials to silver diamine fluoride (SDF)-treated dentin.
-
The Ability of Two Chewing Simulation Devices in Emulating the Clinical Deterioration of Anterior Composite Restorations in Severely Worn Teeth. J. Adhes. Dent. (IF 4.309) Pub Date : 2022-3-2 Verônica P Lima, Rafael R Moraes, Niek J M Opdam, Jan L Ruben, Marie-Charlotte D N J M Huysmans, Bas A C Loomans
This study investigated the ability of two chewing simulation devices to emulate in vitro the clinical deterioration observed in anterior composite restorations in severe tooth-wear patients.