A cobalt-based hydrotalcite-like compound was prepared using a constant-pH coprecipitation method. Cobalt-transition metal oxides (Co2XAlO, X = Co, Mg, Ca and Ni) were investigated for the deep catalytic oxidation of o-chlorophenol as a typical heteroatom contaminant containing chlorine atoms. The partial substitution of Co by Mg, Ca or Ni in the mixed oxide can promote the catalytic oxidation of o-chlorophenol

The spread and development of antibiotic resistance globally have led to severe public health problems. It has been shown that some non-antibiotic substances can also promote the diffusion and spread of antibiotic resistance genes (ARGs). Nanofullerene (nC60) is a type of nanomaterial widely used around the world, and some studies have discovered both the biological toxicity and environmental toxicity

The practical application of the capacitive deionization (CDI) enhanced ultrafiltration (CUF) technology is hampered due to low performance of electrodes. The current study demonstrated a novel super-aligned carbon nanotube (SACNT)/activated carbon (AC) composite electrode, which was prepared through coating AC on a cross-stacked SACNT film. The desalination capability and water purification performance

The role of humic substance-associated persistent free radicals (PFRs) in the fate of organic contaminants under various redox conditions remains unknown. This study examined the characterization of original metal-free peat humin (HM), and HM treated with varying concentrations of H2O2 and L-ascorbic acid (VC) (assigned as H2O2-HM and VC-HM). The concentration of PFRs in HM increased with the addition

Polyacrylamide (PAM) is generally employed in wastewater treatment processes such as sludge dewatering and therefore exists in the sludge. Furthermore, it degrades slowly and can deteriorate methane yield during anaerobic digestion (AD). The impact or fate of PAM in AD under thermophilic conditions is still unclear. This study mainly focuses on PAM degradation and enhanced methane production from PAM-added

Due to improved soil deliverability and high reactivity, stabilized nanoparticles have been studied for nearly two decades for in situ remediation of soil and groundwater contaminated with organic pollutants. While large amounts of bench- and field-scale experimental data have demonstrated the potential of the innovative technology, extensive research results have also unveiled various merits and constraints

Environmentally persistent free radicals (EPFRs) in humic substances play an essential role in soil geochemical processes. Light is known to induce EPFRs formation for dissolved organic matter in aquatic environments; however, the impacts of light irradiation on the variation of EPFRs in soil humic substances remain unclear. In this study, humic acid, fulvic acid, and humin were extracted from peat

Anthropogenic activities are regarded as the main sources of heavy metal pollution, yet few studies have investigated the effects of land-use setting on heavy metal accumulation in riverine sediments. Based on both total contents and geochemical fractions, heavy metal pollution, risk and toxicity were determined in riverine sediment cores from different land-use areas (mountain area- MA, farm area-

High-concentration industrial wastewater containing N,N-dimethylacetamide (DMAc) from polymeric membrane manufacturer was degraded in Cu2O NPs/H2O2 Fenton process. In the membrane-assisted Fenton process DMAc removal rate was up to 98% with 120 min which was increased by 23% over the batch reactor. It was found that ·OH quench time was extended by 20 min and the maximum ·OH productivity was notably88

Titanium dioxide nanoparticle (nano-TiO2), as an excellent UV absorbent and photo-catalyst, has been widely applied in modern industry, thus inevitably discharged into environment. We proposed that nano-TiO2 in soil can promote crop yield through photosynthetic and metabolic disturbance, therefore, we investigated the effects of nano-TiO2 exposure on related physiologic-biochemical properties of rice

Stormwater represents a major non-point pollution source at an urban environment. To improve the treatment efficacy of stormwater infrastructure, low-cost adsorbents have increasingly gained attention over the past decades. This article aims to briefly discuss several key aspects and principles for utilization of low-cost adsorbents for urban stormwater treatment. To determine whether a low-cost adsorbent

Nutrient status and pollution levels are the main factors affecting soil restoration. The nutrient status and pollution levels in five areas, an unexplored mine area (UA), an explored mine area (EA), a tailings area (TA), a reclamation area (RA) and an agricultural area (AA), around the Pingle manganese mine in Guangxi, China, were assessed in this study. The results showed that the average total phosphorus

Antibiotic resistance genes (ARGs) have been detected in various atmospheric environments. Airborne ARGs transmission presents the public health threat. However, it is very difficult to quantify airborne ARGs because of the limited availability of collectable airborne particulate matter and the low biological content of samples. In this study, an optimized protocol for collecting and detecting airborne

Because of the low access to biodegradable organic substances used for denitrification, the partial nitrification-denitrification process has been considered as a low-cost, sustainable alternative for landfill leachate treatment. In this study, the process upgrade from conventional to partial nitrification-denitrification was comprehensively investigated in a full-scale landfill leachate treatment

This research investigates a capacitive deionization method for salinity reduction in a batch reactor as a new approach for desalination. Reductions of cost and energy compared with conventional desalination methods are the significant advantages of this approach. In this research, experiments were performed with a pair of graphite bipolar electrodes that were coated with a one-gram activated carbon

They not only directly impact aquatic organisms, but also indirectly impact these organisms by interacting with background toxins in the environment. Moreover, under realistic environmental conditions, algae, a natural food for aquatic organisms, may alter the toxicity pattern related to MPs. In this research, we first examined the toxicity of MPs alone, and their effect on the toxicity of lead (Pb)

A high level of ozone (O3) is frequently observed in the suburbs of Shanghai, the reason for this high level remains unclear. To obtain a detailed insight on the high level of O3 during summer in Shanghai, O3 and its precursors were measured at a suburban site in Shanghai from July 1, 2016 to July 31, 2016. Using the Hybrid Single-Particle Lagrangian Integrated Trajectory (HYSPLIT) model and concentration

Triggered by global water quality safety issues, the research on wastewater treatment and water purification technology has been greatly developed in recent years. The Fenton technology is particularly powerful due to the rapid attack on pollutants by the generated hydroxyl radicals (•OH). However, both heterogeneous and homogeneous Fenton/Fenton-like technologies follow the classical reaction mechanism

Hexavalent chromium (Cr(VI)) is a water-soluble pollutant in soil and groundwater, the mobility, bioavailability, and toxicity of which can be controlled by transforming to less mobile and more environmentally benign Cr(III) by ways of reduction. This review focused on recent advances in identifying the reaction pathways, kinetics, and products of iron-based techniques for Cr(VI) removal. It also examines

Over the past few decades, engineered, (super)paramagnetic nanoparticles have drawn extensive research attention for a broad range of applications based on their tunable size and shape, surface chemistries, and magnetic properties. This review summaries our recent work on the synthesis, surface modification, and environmental application of (super)paramagnetic nanoparticles. By utilizing hightemperature

The fundamental goal of water quality engineering is to ensure water safety to humans and the environment. Traditional water quality engineering consists of monitoring, evaluation, and control of key water quality parameters. This approach provides some vital insights into water quality, however, most of these parameters do not account for pollutant mixtures - a reality that terminal water users face

Drinking water source contamination poses a great threat to human health in developing countries. Point-of-use (POU) water treatment techniques, which improve drinking water quality at the household level, offer an affordable and convenient way to obtain safe drinking water and thus can reduce the outbreaks of waterborne diseases. Ceramic water filters (CWFs), fabricated from locally sourced materials

Water disinfection is a critical step in water and wastewater treatment. The most widely used chlorination suffers from the formation of carcinogenic disinfection by-products (DBPs) while alternative methods (e.g., UV, O3, and membrane filtration) are limited by microbial regrowth, no residual disinfectant, and high operation cost. Here, a nanowire-enabled disinfection method, locally enhanced electric

Conspectus: Redox reactions of Fe- and Mn-oxides play important roles in the fate and transformation of many contaminants in natural environments. Due to experimental and analytical challenges associated with complex environments, there has been a limited understanding of the reaction kinetics and mechanisms in actual environmental systems, and most of the studies so far have only focused on simple

Z-scheme photocatalysts, with strong redox ability, have a great potential for pollutants degradation. However, it is challenging to construct efficient Z-scheme photocatalysts because of their poor interfacial charge separation. Herein, by employing transparent and conductive SnO2 as electron mediator to pass light through and promote interfacial charge transportation, a novel Z-scheme photocatalyst

The effectiveness of phosphate (P) removal from aqueous solutions was investigated by novel low-cost biochars synthesized from vinasse and functionalized with calcined dolomite. The vinasse-derived biochar, synthesized via pyrolysis at different temperatures, showed easy preparation and a large surface area. The novel vinasse biochar nanocomposites were prepared by adding dolomite to the vinasse biochars

Peroxyacetyl nitrate (PAN) is one of the most important photochemical pollutants and has aroused much concern in China in recent decades. However, few studies described the long-term variations in PAN in China. In this study, we continuously monitored the PAN, O3 and NOx concentrations at a regional background site near Beijing from August 2015 to February 2019. Based on the observed concentrations

In recent times, there has been an increasing demand for energy which has resulted in an increased consumption of fossil fuels thereby posing a number of challenges to the environment. In the course finding possible solutions to this environmental canker, solar photocatalytic water splitting to produce hydrogen gas has been identified as one of the most promising methods for generating renewable energy

Iron sulfide (FeS) nanoparticles (termed FSNs) have attracted much attention for the removal of pollutants due to their high efficiency and low cost, and because they are environmentally friendly. However, issues of agglomeration, transformation, and the loss of active components limit their application. Therefore, this study investigates in situ synthesized FeS/carbon fibers with an Fecarrageenan

The objectives of this study were to investigate the influence of chromium nanoparticles (Cr NPs) on the nitrogen and phosphorus removal performance and the bacterial structures of an activated sludge (AS) system. Also, we through molecular ecological networks (MENs) discussed the bacterial interactions. At last we researched the change of the functional genes and their expression patterns related

Organic pollutants are widespread environmental pollutants with high toxicity, persistence, and bioaccumulation. Our aim was to investigate the distribution of aromatic amines, phenols, chlorobenzenes, and naphthalenes in the surface sediment of the Dianchi Lake, China. Nineteen surface sediment samples were collected from the Dianchi Lake, and 40 types of organic pollutants were analyzed via gas chromatography–mass

The self-inhibition behavior due to CO poisoning on Pt metal particles strongly impairs the performance of CO oxidation. It is an effective method to use reducible metal oxides for supporting Pt metal particles to avoid self-inhibition and to improve catalytic performance. In this work, we used in situ reductions of chloroplatinic acid on commercial Fe3O4 powder to prepare heterogeneousstructured Pt/Fe3O4

In China, pig feces is the predominant source of excrement produced by animal husbandry. Improper use or direct discharge of pig feces can result in contamination of natural water systems. Microbial source tracking (MST) technology can identify the sources of fecal pollution in environmental water, and contribute to the management of pig fecal pollution by local environmental protection agencies. However

Triallyl isocyanurate (TAIC, C12H15N3O3) has featured in wastewater treatment as a refractory organic compound due to the significant production capability and negative environmental impact. TAIC degradation was enhanced when an ozone(O3)/ultraviolet(UV) process was applied compared with the application of an independent O3 process. Although 99% of TAIC could be degraded in 5 min during both processes

Commonly used recharge water resources for artificial groundwater recharge (AGR) such as secondary effluent (SE), river water and rainfall, are all oligotrophic, with low ionic strengths and different cationic compositions. The dwelling process in recharge pond imposed physiologic stress on Escherichia coli (E. coli) cells, in all three types of investigated recharge water resources and the cultivation

Vermicomposting is a feasible method for disposing of lignocellulosic waste while generating a useful product. The current study assessed the potential of vermicomposting green waste mixed with sugarcane bagasse in proportions of 25%, 50%, and 75% (v:v, based on dry weight). The suitability was evaluated based on the agrochemical properties, earthworm biomass, and phytotoxicity. The final vermicomposts

The disposal of fly ash has become a serious problem in China due to its rapid increase in volume in recent years. The most common method of fly ash disposal is solidification-stabilization-landfill, and the most common reuse is low-value-added building materials. A novel processing method for preparing ultra-lightweight ceramsite with fly ash was developed. The results show that the optimal parameters

Diphenylarsinic acid (DPAA) is a phenyl arsenic compound derived from chemical warfare weapons. Macroscopic and microscopic work on DPAA sorption will provide useful information in predicting the partitioning and mobility of DPAA in the soil-water environment. Here, batch experiments and extended X-ray absorption fine structure (EXAFS) spectroscopy were used to investigate the sorption mechanisms of

Energy uncoupling is often used for sludge reduction because it is easy to operate and does not require a significant amount of extra equipments (i.e. no additional tank required). However, over time the supernatant extracted using this method can deteriorate, ultimately requiring further treatment. The purpose of this study was to determine the effect of using a low-pressure ultrafiltration membrane

A constructed wetland microcosm was employed to investigate the sulfur cycle-mediated electron transfer between carbon and nitrate. Sulfate accepted electrons from organics at the average rate of 0.84 mol/(m3·d) through sulfate reduction, which accounted for 20.0% of the electron input rate. The remainder of the electrons derived from organics were accepted by dissolved oxygen (2.6%), nitrate (26.8%)

Magnetotactic bacteria (MTB) are a group of Gram-negative prokaryotes that respond to the geomagnetic field. This unique property is attributed to the intracellular magnetosomes, which contains membrane-bound nanocrystals of magnetic iron minerals. This review summarizes the most recent advances in MTB, magnetosomes, and their potential applications especially the environmental pollutant control or

Municipal SolidWaste (MSW) management in China has been transitioning from a mixed collection and treatment system to a separated collection and treatment system. The continuous rise of MSW treatment capacity and the optimization of technology structure provided basic facility support for China to promote MSW separation at source. China preferred a four-type separation system. Regulated recycling should

The effects of sediment aluminum (Al), organic carbon (OC), and dissolved oxygen (DO) on phosphorus (P) transformation, at the water-sediment interface of a eutrophic constructed lake, were investigated via a series of simulative experiments. The above three factors had various influences on dissolved P concentration, water pH, water and surface sediment appearance, and P fractions. Additions of Al

Gas emissions from swine farms have an impact on air quality in the Republic of Korea. Swine manure stored in deep pits for a long time is a major source of harmful gas emissions. Therefore, we evaluated the mitigation of emissions of ammonia (NH3), hydrogen sulfide (H2S) and amine gases from swine manure with biological products such as seaweed (Sargassum horneri) and a microbial consortium (Bacillus

This study aims to propose a multi-point integrated real-time control method based on discrete dynamic water level variations, which can be realized only based on the programmable logic controller (PLC) system without using a complex mathematical model. A discretized water level control model was developed to conduct the real-time control based on data-automation. It combines the upstream pumping stations

Adsorption of biochars (BC) produced from cash crop residuals is an economical and practical technology for removing nutrients from agricultural runoff. In this study, BC made of orange tree trunks and tea tree twigs from the Laoguanhe Basin were produced and modified by aluminum chloride (Al-modified) and ferric sulfate solutions (Fe-modified) under various pyrolysis temperatures (200°C–600°C) and

Various single-ring aromatic compounds in water sources are of great concern due to its hazardous impact on the environment and human health. The fluorescence excitation-emission matrix (EEMs) spectrophotometry is a useful method to identify organic pollutants in water. This study provides a detailed insight into the fluorescence properties of the 14 selected toxic single-ring aromatic compounds by

The influences of flow patterns (mixed-flow and plug-flow) and fermentation pretreatment on aerobic granular sludge (AGS) formation with various substrate availability levels were investigated by running four identical laboratory-scale sequencing batch reactors (R1-R4), comparing two anaerobic feeding strategies and three kinds of substrates. R1 achieved faster granulation with a fast influent fill

A new technique of zero-valent zinc coupled with ascorbic acid (ZVZ/AA) was developed and applied to debrominate the 2,2′,4,4′-Tetrabromodiphenyl ether (BDE-47), which achieved high conversion and rapid debromination of BDE-47 to less- or non-toxic forms. The reaction conditions were optimized by the addition of 100 mg/L ZVZ particles and 3 mmol/L AA at original solution pH = 4.00 using the solvent

Abstract In this study, a hydrophilic resin named GCHM was fabricated based on poly(N-vinyl pyrrolidone-co-divinylbenzene), characterized, and applied as a solid-phase extraction (SPE) material. Up to 44 pharmaceuticals and personal care products (PPCPs) belonging to 10 classes were recovered in environmental water samples. Different variables affecting extraction, such as adsorbent amount, sample

Abstract We prepared ethylenediaminetetraacetic acid (EDTA)-intercalated MgAl-layered double hydroxide (LDH-EDTA), then grafted acrylamide (AM) to the LDH-EDTA by a cross-linking method to yield a LDH-EDTA-AM composite; we then evaluated its adsorptive ability for Congo red (CR) and hexavalent chromium (Cr(VI)) in single and binary adsorption systems. The adsorption process on LDH-EDTA-AM for CR and

Abstract Land use regression (LUR) models have been widely used in air pollution modeling. This regression-based approach estimates the ambient pollutant concentrations at un-sampled points of interest by considering the relationship between ambient concentrations and several predictor variables selected from the surrounding environment. Although conceptually quite simple, its successful implementation

Abstract In recent years, sudden water pollution accidents in China’s rivers have become more frequent, resulting in considerable effects on environmental safety. Therefore, it is necessary to simulate and predict pollution accidents. Simulation and prediction provide strong support for emergency disposal and disaster reduction. This paper describes a new two-dimensional water quantity and the quality

Abstract Authors want to publish their work as soon as possible. However, the manuscript processing time increases if the manuscript does not meet the journal requirements. Our analysis of manuscripts submitted to Frontiers of Environmental Science & Engineering from November 2018 to July 2019 shows that the processing time was increased up to 33 days because the manuscripts: (1) had inconsistent formatting

Abstract Aromatic organophosphate flame retardant (OPFR) pollutants and biochars are commonly present and continually released into soils due to their increasingly wide applications. In this study, for the first time, the sorption of OPFRs on biochars was investigated. Although triphenyl phosphate (TPhP) and triphenylphosphine oxide (TPPO) have similar molecular structures and sizes, TPhP exhibited

Abstract The g-MoS2 coated biochar (g-MoS2-BC) composites were synthesized by coating original biochar with g-MoS2 nanosheets at 300°C(BC300)/700°C (BC700). The adsorption properties of the g-MoS2-BC composites for ciprofloxacin (CIP) were investigated with an aim to exploit its high efficiency toward soil amendment. The specific surface area and the pore structures of biochar coated g-MoS2 nanosheets

Abstract Advanced water treatment is commonly used to remove micropollutants such as pesticides, endocrine disrupting chemicals, and disinfection byproducts in modern drinking water treatment plants. However, little attention has been paid to the changes in the genotoxicity of substances remaining in the water following the different water treatment processes. In this study, samples were collected

The authors regret that the original version of the above article contained an error of the affiliation of one of the co-authors Baikun Li. The correct and final version is shown below: Baikun Li, Department of Civil and Environmental Engineering, University of Connecticut, Storrs, CT 06269, USA. The authors would like to apologise for any inconvenience caused.

Abstract The design of electrodes is crucial to electrocoagulation process (EC), specifically, with respect to pollutant removal and energy consumption. During EC, the mechanisms for interaction between different electrode arrangement and electrode reactions remain unclear. This work presents an integrated EC process based on horizontal bipolar electrodes (BPEs). In the electrochemical cell, the graphite

Abstract For over two decades, sulfate reduction with ammonium oxidation (SRAO) had been reported from laboratory experiments. SRAO was considered an autotrophic process mediated by anammox bacteria, in which ammonium as electron donor was oxidized by the electron acceptor sulfate. This process had been attributed to observed transformations of nitrogenous and sulfurous compounds in natural environments