当前期刊: Reviews in Chemical Engineering Go to current issue    加入关注   
显示样式:        排序: IF: - GO 导出
我的关注
我的收藏
您暂时未登录!
登录
  • A review of data-driven fault detection and diagnosis methods: applications in chemical process systems
    Rev. Chem. Eng. (IF 5.315) Pub Date : 2020-05-26
    Norazwan Md Nor; Che Rosmani Che Hassan; Mohd Azlan Hussain

    Fault detection and diagnosis (FDD) systems are developed to characterize normal variations and detect abnormal changes in a process plant. It is always important for early detection and diagnosis, especially in chemical process systems to prevent process disruptions, shutdowns, or even process failures. However, there have been only limited reviews of data-driven FDD methods published in the literature

    更新日期:2020-05-26
  • Synthesis and applications of carbon nanofibers: a review
    Rev. Chem. Eng. (IF 5.315) Pub Date : 2020-05-26
    Juan C. Ruiz-Cornejo; David Sebastián; Maria J. Lázaro

    Carbon nanofibers (CNFs) have shown great potential in multiple applications. Their versatility is derived from the possibility of tuning their physical and chemical properties. CNFs can be synthesized using two main methods: the catalytic decomposition of carbon precursors or the electrospinning and carbonization of polymers. The most appropriate method relies on the desired characteristics of the

    更新日期:2020-05-26
  • Potential of metal monoliths with grown carbon nanomaterials as catalyst support in intensified steam reformer: a perspective
    Rev. Chem. Eng. (IF 5.315) Pub Date : 2020-05-26
    Luqmanulhakim Baharudin; Alex Chi-Kin Yip; Vladimir Golovko; Matthew James Watson

    A monolithic catalytic support is potentially a thermally effective system for application in an intensified steam reforming process. In contrast to ceramic analogues, metal monoliths exhibit better mechanical strength, thermal conductivity and a thermal expansion coefficient equivalent to that of the reformer tube. A layer of carbon nanomaterials grown on the metal monolith’s surface can act as a

    更新日期:2020-05-26
  • Cobalt hybrid catalysts in Fischer-Tropsch synthesis
    Rev. Chem. Eng. (IF 5.315) Pub Date : 2020-05-26
    Aliu A. Adeleke; Xinying Liu; Xiaojun Lu; Mahluli Moyo; Diane Hildebrandt

    Currently, cobalt and zeolites are used in Fischer-Tropsch synthesis (FTS) to produce gasoline-range hydrocarbons (GRHs) that constitute clean and environmentally friendly fuels. This technology has earned a great deal of attention from researchers across the world, as it provides a substitute for fuel derived from fossil crudes, which have hitherto been the sole source of the petrol and diesel required

    更新日期:2020-05-26
  • In this issue
    Rev. Chem. Eng. (IF 5.315) Pub Date : 2020-05-26

    Journal Name: Reviews in Chemical Engineering Volume: 36 Issue: 4 Pages: iv-iv

    更新日期:2020-05-26
  • Frontmatter
    Rev. Chem. Eng. (IF 5.315) Pub Date : 2020-05-26

    Journal Name: Reviews in Chemical Engineering Volume: 36 Issue: 4 Pages: i-iii

    更新日期:2020-05-26
  • Computational methods towards increased efficiency design of graphene membranes for gas separation and water desalination
    Rev. Chem. Eng. (IF 5.315) Pub Date : 2020-04-22
    Sorin Muraru; Mariana Ionita

    The potential impact of climate change is widely known as having serious consequences. The themes of water desalination and gas separation are closely related to the environment and energy industry. Graphene-based membranes are promising filtration devices for the two tasks. This review aims to supply a comprehensive overview of the recent computational studies investigating the performance of graphene-based

    更新日期:2020-04-22
  • Advances in membranes and membrane reactors for the Fischer-Tropsch synthesis process for biofuel production
    Rev. Chem. Eng. (IF 5.315) Pub Date : 2020-04-03
    Dalia Liuzzi; Ekain Fernandez; Susana Perez; Enrique Ipiñazar; Amaya Arteche; José Luís G. Fierro; Jose Luis Viviente; David Alfredo Pacheco Tanaka; Sergio Rojas

    The biomass-to-liquid (BtL) process is a promising technology to obtain clean, liquid, second-generation biofuels and chemicals. The BtL process, which comprises several steps, is based upon the gasification of biomass and the catalytic transformation of the syngas that is obtained via the Fischer-Tropsch synthesis (FTS) reaction, producing a hydrocarbon pool known as syncrude. The FTS process is a

    更新日期:2020-04-03
  • Opportunities for holistic waste stream valorization from food waste treatment facilities: a review
    Rev. Chem. Eng. (IF 5.315) Pub Date : 2020-03-26
    Abdulmoseen Segun Giwa; Nasir Ali; Mohammadtaghi Vakili; Xiaogang Guo; Dongsheng Liu; Kaijun Wang

    Difficult-to-biodegrade fractions (DBFs) generated from the biological treatment of food waste (FW) account for approximately 30% of the actual waste. These wastes are difficult to degrade or are considered indigestible residues of the aerobic and anaerobic fermentation treatment of FW treatment facilities. The currently applied disposal routes for DBFs exert environmental pressure and underutilize

    更新日期:2020-03-26
  • Thermodynamic models applied to CO2 absorption modelling
    Rev. Chem. Eng. (IF 5.315) Pub Date : 2020-03-09
    Tohid N. Borhani; Seyed A. Nabavi; Dawid P. Hanak; Vasilije Manovic

    Carbon capture, utilisation, and storage (CCUS) is considered as the least cost-intensive option towards achieving the emission reduction target by 2050. One of the important technologies to remove CO2 from different gas streams is solvent-based CO2 capture. Modelling and simulation of solvent-based CO2 capture processes have been attracting a lot of attention in recent years. Thermodynamic models

    更新日期:2020-03-09
  • The use of nanotechnology to prevent and mitigate fine migration: a comprehensive review
    Rev. Chem. Eng. (IF 5.315) Pub Date : 2020-03-09
    Ali Madadizadeh; Alireza Sadeghein; Siavash Riahi

    Fine migration is a serious problem in petroleum reservoir that causes damage to the reservoir and production equipment. One of the methods to solve this problem is using nanotechnology. Nanoparticles can reduce fine migration by various mechanisms such as reducing the zeta potential, changing the total interaction energy between surfaces, pH, and roughness of the particle’s surfaces. This study presents

    更新日期:2020-03-09
  • Common well cements and the mechanism of cement-formation bonding
    Rev. Chem. Eng. (IF 5.315) Pub Date : 2020-03-07
    Samwel Daud Lupyana; Mtaki Thomas Maagi; Jun Gu

    This article reviews the common well cements and describes the basic nature of the cement-formation bond in zonal isolation and its effects on the mechanical and hydraulic performance. The cements are Classes G and H Portland well cements. The cement-formation interface bonding mechanism is a combination of the mechanical indentation of the cement hydrates that interlock to the formation surface and

    更新日期:2020-03-07
  • Frontmatter
    Rev. Chem. Eng. (IF 5.315) Pub Date : 2020-02-29

    Journal Name: Reviews in Chemical Engineering Volume: 36 Issue: 5 Pages: i-iii

    更新日期:2020-02-29
  • Influence of different surface treatment techniques on properties of rice husk incorporated polymer composites
    Rev. Chem. Eng. (IF 5.315) Pub Date : 2020-02-24
    Obinna Emmanuel Ezenkwa; Azman Hassan; Sani Amril Samsudin

    Rice husk natural fiber remains a highly abundant, eco-friendly and low-cost reinforcement filler for plastic composites fabrication. Hampered by its low aspect ratio and incompatibility with non-polar polymers, its utilization in reinforcing polymer composites often results in decreased composite properties such as decreased tensile strength, impact strength, percentage elongation, and flexural strength

    更新日期:2020-02-24
  • High-performance pervaporation chitosan-based membranes: new insights and perspectives
    Rev. Chem. Eng. (IF 5.315) Pub Date : 2020-02-24
    Roberto Castro-Muñoz; José González-Valdez; M. Zamidi Ahmad

    Today, the need of replacing synthetic polymers in the membrane preparation for diverse pervaporation (PV) applications has been recognized collectively and scientifically. Chitosan (CS), a bio-polymer, has been studied and proposed to achieve this goal especially in specific azeotropic water-organic, organic-water, and organic-organic separations, as well as in assisting specific processes (e.g. seawater

    更新日期:2020-02-24
  • Recent advances in low-temperature electrochemical conversion of carbon dioxide
    Rev. Chem. Eng. (IF 5.315) Pub Date : 2020-02-14
    Farihahusnah Hussin; Mohamed Kheireddine Aroua

    Since the onset of the industrial revolution, fossil fuels have been the primary source of energy generation, and the continued exploitation of fossil fuels has led to an increase in the amount of atmospheric carbon dioxide. A lot of research currently focuses much on decreasing dependence on fossil fuels by replacing them with green energy. However, this technique poses a number of challenges, such

    更新日期:2020-02-14
  • Aluminum extraction technologies from high aluminum fly ash
    Rev. Chem. Eng. (IF 5.315) Pub Date : 2020-02-14
    Yajing Gao; Kai Liang; Yi Gou; Shun’an Wei; Weifeng Shen; Fangqin Cheng

    Coal fly ash (CFA), an industrial by-product of high-temperature combustion of coal in coal-fired power plants, is one of the most complex and largest amounts of industrial solid wastes generated in China. It is widely recognized that CFA should be considered as a potential alumina resource to substitute bauxite. In this review, the features of high-alumina fly ash and aluminum recovery technologies

    更新日期:2020-02-14
  • Confined multiphase swirled flows in chemical engineering
    Rev. Chem. Eng. (IF 5.315) Pub Date : 2020-02-14
    Andrey O. Kuzmin

    Exploration of confined swirled flows in the former USSR and present-day Russia has a long history and is presented by numerous publications, mostly written in Russian. The obtained results have been put to practical use in different areas of chemical, energy, and processing industries. In view of the process intensification concept, such characteristics of confined swirled flows may be considered

    更新日期:2020-02-14
  • Hydrodynamic review on liquid–solid magnetized fluidized bed
    Rev. Chem. Eng. (IF 5.315) Pub Date : 2020-01-23
    Quanhong Zhu; Qingshan Huang; Chao Yang

    The magnetic field has been successfully used to intensify the liquid–solid contact performance in the fluidized bed, creating the magnetized fluidized bed (MFB). The MFBs with purely magnetizable particles and with the binary admixture of magnetizable and nonmagnetizable particles could be simply termed the pure MFB and admixture MFB, respectively. Their potential application in the chemical and biochemical

    更新日期:2020-01-23
  • Nickel ion removal from aqueous solutions through the adsorption process: a review
    Rev. Chem. Eng. (IF 5.315) Pub Date : 2020-01-15
    Mohammadtaghi Vakili; Mohd Rafatullah; Jing Yuan; Haider M. Zwain; Amin Mojiri; Zahra Gholami; Fatemeh Gholami; Wei Wang; Abdulmoseen S. Giwa; Youqing Yu; Giovanni Cagnetta; Gang Yu

    Recently, removal of nickel ions has been gaining a lot of attention because of the negative impact of nickel ions on the environment. The aim of this review paper is to organize the scattered available information on removal of nickel ions from aqueous solutions through the adsorption process. Survey on investigated materials suggests that composite- and polymer-based adsorbents have the most effective

    更新日期:2020-01-15
  • Bubbly flow in degassing cyclones and potential applications
    Rev. Chem. Eng. (IF 5.315) Pub Date : 2020-01-14
    Xiao Xu; Hao Lu; Qiang Yang; Fengqin He; Honglai Liu; Hualin Wang

    A degassing cyclone is a separator that is widely used for the removal of bubbles and dissolved gas from liquids. Gas bubbles move toward the swirling center region in a degassing cyclone due to centrifugal force. The dissolved gas is desorbed due to a decrease in the saturated solubility resulting from the pressure gradient in the degassing cyclone. Additional carrier gas bubbles with lower partial

    更新日期:2020-01-14
  • A review of recent progress on electrocatalysts toward efficient glycerol electrooxidation
    Rev. Chem. Eng. (IF 5.315) Pub Date : 2020-01-13
    Peter Adeniyi Alaba; Ching Shya Lee; Faisal Abnisa; Mohamed Kheireddine Aroua; Patrick Cognet; Yolande Pérès; Wan Mohd Ashri Wan Daud

    Glycerol electrooxidation has attracted immense attention due to the economic advantage it could add to biodiesel production. One of the significant challenges for the industrial development of glycerol electrooxidation process is the search for a suitable electrocatalyst that is sustainable, cost effective, and tolerant to carbonaceous species, results in high performance, and is capable of replacing

    更新日期:2020-01-13
  • A comprehensive study on the bacterial biosorption of heavy metals: materials, performances, mechanisms, and mathematical modellings
    Rev. Chem. Eng. (IF 5.315) Pub Date : 2020-01-09
    Mahendra Aryal

    Discharges of waste containing heavy metals (HMs) have been a challenging problem for years because of their adverse effects in the environment. This article provides a comprehensive review of recent findings on bacterial biosorption and their performances for sequestration of HMs. It highlights the significance of HM removal and presents a brief overview on bacterial functionality and biosorption

    更新日期:2020-01-09
  • Research advancements in sulfide scavengers for oil and gas sectors
    Rev. Chem. Eng. (IF 5.315) Pub Date : 2019-11-15
    Viswanathan S. Saji

    Sulfide species (inorganic and organic sulfides) are well known for their toxicity and corrosiveness. Several industries, including oil and gas, are prone to corrosive damage due to sulfides that necessitate their timely removal using appropriate methods. Employing chemical scavengers is the most suitable method where the scavenger combine with dissolved sulfides in aqueous/hydrocarbon phase and convert

    更新日期:2019-11-15
  • Uncertainty in chemical process systems engineering: a critical review
    Rev. Chem. Eng. (IF 5.315) Pub Date : 2019-11-14
    Seyedmehdi Sharifian; Rahmat Sotudeh-Gharebagh; Reza Zarghami; Philippe Tanguy; Navid Mostoufi

    Uncertainty or error occurs as a result of a lack or misuse of knowledge about specific topics or situations. In this review, we recall the differences between error and uncertainty briefly, first, and then their probable sources. Then, their identifications and management in chemical process design, optimization, control, and fault detection and diagnosis are illustrated. Furthermore, because of the

    更新日期:2019-11-14
  • Fractionation of biomass and plastic wastes to value-added products via stepwise pyrolysis: a state-of-art review
    Rev. Chem. Eng. (IF 5.315) Pub Date : 2019-11-12
    Yafei Shen

    Pyrolysis has been considered as a promising thermochemical process that can convert biomass in nonoxidizing atmospheres to value-added liquid bio-oil, solid biochar, and noncondensable gas products. Fast pyrolysis has a better economic return because of the valuable biofuel production (e.g. bio-oil, syngas). Because of the complexity and heterogeneity of the feedstocks, the one-step pyrolysis often

    更新日期:2019-11-12
  • Challenges and implication of full solar spectrum-driven photocatalyst
    Rev. Chem. Eng. (IF 5.315) Pub Date : 2019-10-05
    Ahmad Nawaz; Aneek Kuila; Nirmalendu Sekhar Mishra; Kah Hon Leong; Lan Ching Sim; Pichiah Saravanan; Min Jang

    Conventional metal oxide and its composites embrace the long-standing problem of using the combined visible and near-infrared (NIR) light. Doping with suitable impurities of metal, nonmetal, or its combinations for visible light enhancement is very well studied. However, the quantum efficiency of these photocatalysts does not produce an exciting appearance toward visible and NIR light when irradiated

    更新日期:2019-10-05
  • Ceramic-based photocatalytic membrane reactors for water treatment – where to next?
    Rev. Chem. Eng. (IF 5.315) Pub Date : 2019-01-31
    Inna Horovitz; Vitaly Gitis; Dror Avisar; Hadas Mamane

    Ceramic-based photocatalytic membrane reactors (cPMRs) are becoming increasingly popular among researchers and will soon be seen on the water/wastewater-treatment market. This review provides a thorough analysis of the available data on cPMRs fabricated to date based on coating method, support and coating materials, membrane design, pore size and model compounds used to evaluate process efficiency

    更新日期:2019-01-31
  • Tailoring graphene reinforced thermoset and biothermoset composites
    Rev. Chem. Eng. (IF 5.315) Pub Date : 2019-01-26
    Nur Bazilah Thalib; Siti Noor Hidayah Mustapha; Chong Kwok Feng; Rohani Mustapha

    The surge of knowledge among researchers pertaining to the excellent properties of graphene has led to the utilisation of graphene as a reinforced filler in polymer composites. Different methods of graphene preparation, either bottom-up or top-down methods, are important requirements of starting materials in producing reinforced properties in the composites. The starting graphene material produced

    更新日期:2019-01-26
  • Critical review of different aspects of liquid-solid mixing operations
    Rev. Chem. Eng. (IF 5.315) Pub Date : 2019-01-11
    Prakash Mishra; Farhad Ein-Mozaffari

    Mechanically stirred slurry tanks are utilized in several industries to perform various unit operations such as crystallization, adsorption, ion-exchange, suspensions polymerization, dispersion of solid particles, leaching and dissolution, and activated sludge processes. The major goal of this review paper is to critically and thoroughly analyse the different aspects of previous research works reported

    更新日期:2019-01-11
Contents have been reproduced by permission of the publishers.
导出
全部期刊列表>>
AI核心技术
10years
自然科研线上培训服务
材料学研究精选
Springer Nature Live 产业与创新线上学术论坛
胸腔和胸部成像专题
自然科研论文编辑服务
ACS ES&T Engineering
ACS ES&T Water
屿渡论文,编辑服务
杨超勇
周一歌
华东师范大学
段炼
清华大学
廖矿标
李远
跟Nature、Science文章学绘图
隐藏1h前已浏览文章
中洪博元
课题组网站
新版X-MOL期刊搜索和高级搜索功能介绍
ACS材料视界
x-mol收录
福州大学
南京大学
王杰
左智伟
电子显微学
何凤
洛杉矶分校
吴杰
赵延川
试剂库存
天合科研
down
wechat
bug