-
Study on the hydrophobic nano silica particles as flow-enhancing additives for ultrafine dry powder fire extinguishing agent Adv. Powder Technol. (IF 5.2) Pub Date : 2024-03-12 Yanting Zhou, Junchao Zhao, Yangyang Fu, Zhilei Yu, Song Lu, Heping Zhang, Yong Jiang
[Display omitted]
-
Effect of different particle size fractions on flotation separation of fine rutile from garnet Adv. Powder Technol. (IF 5.2) Pub Date : 2024-03-11 Shiman Zhu, Liuyi Ren, Shenxu Bao, Yimin Zhang, Bo Chen
[Display omitted]
-
Incorporating cerium dioxide into nitrogen-doped carbon fibers for high-performance lithium-ion batteries Adv. Powder Technol. (IF 5.2) Pub Date : 2024-03-09 Gongyu Wen, Xiaoping Zhang, Jie Wang, Yian Wang, Kexin Rao, Yulei Sui, Wenbin Fei, Jiuxiang Zhang, Ling Wu
[Display omitted]
-
Fe2W18Fe4@MOF-Ni-100 nanocomposite: Insights into synthesis and application as a promising material towards the electrocatalytic water oxidation Adv. Powder Technol. (IF 5.2) Pub Date : 2024-03-09 Mohammad Ali Rezvani, Hadi Hassani Ardeshiri, Hossein Ghafuri, Nasrin Khalafi
[Display omitted]
-
Green fabrication of CuO-egTiO2 composite for photodegradation of organic pollutant under direct visible light illumination Adv. Powder Technol. (IF 5.2) Pub Date : 2024-03-06 Jaafar Hassan, T. Karar Mahdi, G. Ghufran Ammar, Chuanguang Qin
[Display omitted]
-
Aggregate size and density estimation from settling tests: An evaluation of available approaches using computational fluid dynamics Adv. Powder Technol. (IF 5.2) Pub Date : 2024-03-06 Ismael A. Mola, Phillip D. Fawell, Michael Small
[Display omitted]
-
Effect of pre-milling (Ni and Al) on the sintering behavior of NiAlFeCoCr high entropy alloy Adv. Powder Technol. (IF 5.2) Pub Date : 2024-02-29 U. Devi Sushma, Akshay Devikar, G. Chandramouli, G.S. Vinod Kumar, Sheela Singh
[Display omitted]
-
High-temperature ball milling: An efficient method to fabricate Ti and its alloy powder for additive manufacturing Adv. Powder Technol. (IF 5.2) Pub Date : 2024-02-28 Dongdong Chen, Bowen Liu, Guyu Sun, Wei Xu, Yanliang Zhu, Yang An, Langping Zhu, Xianfei Ding, Jiazhen Zhang, Xin Lu
[Display omitted]
-
Model for solids flow rate through loop seal in a circulating fluidized bed Adv. Powder Technol. (IF 5.2) Pub Date : 2024-02-28 Dong Hun Lee, Na Yeon Kim, Jun Ho Lee, Jeong-Hoo Choi, Ji Bong Joo, Ho-Jung Ryu
[Display omitted]
-
Mechano-chemical hydrothermal synthesis of NH4NiPO4·H2O and its transformation to LiNiPO4 Adv. Powder Technol. (IF 5.2) Pub Date : 2024-02-26 Jan Huebner, Takahiro Kozawa, Akira Kondo, Kayo Fukuyama, Makio Naito
[Display omitted]
-
Resolved simulation of monodisperse/polydisperse sedimentation: Influence of a single particle motion on cluster sedimentation Adv. Powder Technol. (IF 5.2) Pub Date : 2024-02-26 Govind Sharma, Bahni Ray
[Display omitted]
-
In-situ solvothermal growth of Zn2SnO4 films on FTO glass towards superior dye-sensitized solar cells Adv. Powder Technol. (IF 5.2) Pub Date : 2024-02-23 Yu-Fen Wang, Ming-Wu Liu, Qing-Qing Miao, Yi-Rui Deng, Rui-Ping Liu, Junqing Zhang, Lei Zhang
[Display omitted]
-
Image processing algorithm for systematic evaluation of angle of repose and void ratio for particulate media Adv. Powder Technol. (IF 5.2) Pub Date : 2024-02-22 Ammar Mohammed Alshammari, Dante Fratta
[Display omitted]
-
An efficient approach to obtain analytical solution of nonlinear particle aggregation equation for longer time domains Adv. Powder Technol. (IF 5.2) Pub Date : 2024-02-22 Nisha Yadav, Mehakpreet Singh, Sukhjit Singh, Randhir Singh, Jitendra Kumar, Stefan Heinrich
[Display omitted]
-
Large eddy simulation of soot formation in a laboratory pulverized coal flame Adv. Powder Technol. (IF 5.2) Pub Date : 2024-02-20 Ruipeng Cai, Kun Luo, XinZhou Tang, Chunguang Zhao, Anxiong Liu, Jiangkuan Xing, Jianren Fan
[Display omitted]
-
A mathematical model for the permeability evolution of coal-bearing hydraulic propped fractures Adv. Powder Technol. (IF 5.2) Pub Date : 2024-02-20 Xitu Zhang, Shengyong Hu, Guorui Feng, Guofu Li, Siyuan Li, Xiaonan Sun, Shuyun Guo, Zhaoying Chen
The established dynamic evolution mathematical model of coal-bearing propped fractures had the ability to accurately predict the characteristics of coal fine migration and deposition in the entire region of the propped fractures, as well as identifying spatial–temporal variations in the porosity and permeability of the propped fractures.
-
Charging mechanism of polymers under gaseous water molecule Adv. Powder Technol. (IF 5.2) Pub Date : 2024-02-16 Masato Sakaguchi, Masakazu Makino
[Display omitted]
-
Investigation of the use of glycerin as a by-product, pomace oil and paper wastewater as grinding aids in marble dust wastes Adv. Powder Technol. (IF 5.2) Pub Date : 2024-02-16 Diler Katircioglu-Bayel
[Display omitted]
-
Light extinction coefficient and particle size correlation for real-time prediction and quantitative measurement of suspended dust concentrations Adv. Powder Technol. (IF 5.2) Pub Date : 2024-02-15 Mike Sserunjogi, Kingsly Ambrose
[Display omitted]
-
Experimental study on the suppression of coal dust explosion by ammonium polyphosphate modified aerogel based on explosive solid/gas products Adv. Powder Technol. (IF 5.2) Pub Date : 2024-02-13 Yang Wu, Xiangbao Meng, Lei Shi, Xiaozhen Yu, Yujian Zhu
[Display omitted]
-
Investigation on stability and energy potential of boron-loaded slurry fuel with higher loadings Adv. Powder Technol. (IF 5.2) Pub Date : 2024-02-13 P. Prabhudeva, Srinibas Karmakar
[Display omitted]
-
Effect of side aeration and bottom aeration of U-type loop seal in a fluidized bed reactor on flow behaviors of solid particles and solid circulation rate Adv. Powder Technol. (IF 5.2) Pub Date : 2024-02-13 Atipong Armatsombat, Pholritt Julmon, Chuan Paengpassa
[Display omitted]
-
Superhydrophobic coating of a modified calcium sulfate whiskers@SiO2-F/TPU for anti-icing applications Adv. Powder Technol. (IF 5.2) Pub Date : 2024-02-13 Zhengjun Chen, Binbin Shen, Yulu Zhang, Hanlong Guo, Zhong Chen, Rong Wei, Jun Hu
[Display omitted]
-
A pre-adsorption system: The application of 8-hydroxyquinoline in the separation of specularite and chlorite Adv. Powder Technol. (IF 5.2) Pub Date : 2024-02-12 Pengpeng Zhang, Guoqi Song, Chao Wang, Zhou Chen, Xiangpeng Gao, Mingyang Li
[Display omitted]
-
Particle dispersion model for RANS simulations of particle-laden jet flows, incorporating Stokes number effects Adv. Powder Technol. (IF 5.2) Pub Date : 2024-02-10 Xinchen Zhang, Zhao F. Tian, Alfonso Chinnici, Hua Zhou, Graham J. Nathan, Rey C. Chin
[Display omitted]
-
Performance enhancements of PU composite foams reinforced with starfish particles chemically treated by silane derivatives Adv. Powder Technol. (IF 5.2) Pub Date : 2024-02-08 Dongju Yun, Jung Hyeun Kim
[Display omitted]
-
Study on the factors influencing the performance of dust collection hood of angle grinder based on CFD-DEM simulation Adv. Powder Technol. (IF 5.2) Pub Date : 2024-02-06 Jihe Chen, Xunxian Shi, Shuo Liu, Zhongan Jiang, Ming Wang
[Display omitted]
-
A numerical model for predicting powder characteristics in LMD considering particle interaction Adv. Powder Technol. (IF 5.2) Pub Date : 2024-02-05 Ahmet Guner, Prveen Bidare, Amaia Jiménez, Chang Shu, Nikolina Kovacev, Khamis Essa
[Display omitted]
-
Research on classification of natural plant products and critical factors affecting tablet disintegration properties based on texture analyzer Adv. Powder Technol. (IF 5.2) Pub Date : 2024-02-03 Zhenda Liu, Chuting Shi, Ying Fang, Liangfeng Wang, Lijie Zhao, Lan Shen
-
Prevention and suppression of coal dust explosion in underground coal mines: Role of rock dust type, particle size, proportion, concentration, and thermal properties Adv. Powder Technol. (IF 5.2) Pub Date : 2024-01-31 Aashish Sahu, Devi Prasad Mishra
-
-
-
Excellent CO2 adsorption performance of amine-impregnated highly porous ZIF-8 adsorbent: Experimental and isotherm modeling studies Adv. Powder Technol. (IF 5.2) Pub Date : 2024-01-28 Puspendu Sardar, Guruprasad Bhattacharya, Radhapada Manna, Shubham Raj, Sibsankar Rahut, Amar Nath Samanta
-
The study of photocatalytic characteristics of NiAl2O4 spinel and NiO/Al2O3 composites obtained in SCS reactions with glycine Adv. Powder Technol. (IF 5.2) Pub Date : 2024-01-26 V.D. Zhuravlev, L.V. Ermakova, L.Yu. Buldakova, M.Yu. Yanchenko
-
Passive method of clusters regulation using internal rings in fluidized bed risers Adv. Powder Technol. (IF 5.2) Pub Date : 2024-01-25 Xiaoxue Jiang, Xiaobing Wang, Dong Li, Chongyong Su, Junfeng Gu, Ruichao Tian
-
Quantitative analysis of wet kneading states by a novel compression test Adv. Powder Technol. (IF 5.2) Pub Date : 2024-01-24 Jonosuke Matsumoto, Shuji Ohsaki, Hideya Nakamura, Satoru Watano
-
Particle shear and impact (PSI) tester: Evaluation of device performance Adv. Powder Technol. (IF 5.2) Pub Date : 2024-01-23 Graham Calvert, Hossein Ahmadian, Zayeed Alam, Aram Dedeyan, Douglas Dale, Beth Concoby, Poul Bach, Saba Saifoori, Mojtaba Ghadiri
-
Prediction of operating state of hydrocyclones using vibrometry and 1D convolutional neural networks Adv. Powder Technol. (IF 5.2) Pub Date : 2024-01-23 M.H. Tyeb, S. Mishra, A. Singh, A.K. Majumder
-
Effects of microemulsion collector mixtures on the flotation performance of low-rank coal: A combined simulation and experimental study Adv. Powder Technol. (IF 5.2) Pub Date : 2024-01-19 Rongjie Kong, Shiwei Wang, Dongjiao Gui
-
Effect of seawater on flotation separation of galena from sphalerite Adv. Powder Technol. (IF 5.2) Pub Date : 2024-01-17 Song Ningbo, Yin Wanzhong, Yao Jin
-
Effects of pellet-sinter interaction parameters on component segregation and bed porosity considering flow velocity and mixture composition: A DEM study Adv. Powder Technol. (IF 5.2) Pub Date : 2024-01-16 Raïsa Roeplal, Yusong Pang, Dingena Schott
-
Comb polymer with ionic side chains as a novel dispersant for cement slurries: Synthesis, characterization and working mechanism Adv. Powder Technol. (IF 5.2) Pub Date : 2024-01-13 Jianan Guan, Xiao Liu, Shaojing Liu, Ruijun Gao, Ziming Wang, Suping Cui
-
Multi-effect of fineness and replacement ratio of binders on thixotropic and some fresh state properties of cementitious systems, a comparative study Adv. Powder Technol. (IF 5.2) Pub Date : 2024-01-12 Hatice Gizem Şahin, Öznur Biricik Altun, Ali Mardani
-
Performance analysis of multi-inlet cyclone separators considering different shapes and locations of the inlet ducts Adv. Powder Technol. (IF 5.2) Pub Date : 2024-01-09 Lakhbir Singh Brar, Faisal Rahmani, Marek Wasilewski
-
Investigation of cigarette effect and elastic-plastic behavior of green iron pellets on the roller screen efficiency Adv. Powder Technol. (IF 5.2) Pub Date : 2024-01-06 Mehrshad Asghari, Mohammad Noaparast, Mohammad Jahani Chegeni
-
Effects of water-based SiO2 nanofluids on the wettability of coal dust and particle deposition characteristics Adv. Powder Technol. (IF 5.2) Pub Date : 2024-01-05 Quanle Zou, Xueqi Jia, Tiancheng Zhang, Jinyan Liang
-
Enhancing the capturing characteristics of charged droplets on submicron particles: An experimental and numerical investigation Adv. Powder Technol. (IF 5.2) Pub Date : 2024-01-02 Yi Liu, Haogang Huang, Lin Zhang, Xi Zhang, Hongwei Qian, Chengman Zhou, Xianglong Chen, Yaoni Xu, Pei Han
-
Simultaneous anionic dyes degradation via H2O2 activation using Zeolite 4A/ZnO/Fe2(MoO4)3 nanoparticles in a sono-photocatalytic process Adv. Powder Technol. (IF 5.2) Pub Date : 2023-12-29 Mahsa Foroughi, Seyed Jamaleddin Peighambardoust, Bahman Ramavandi, Daria Camilla Boffito
-
Nano-Fe3O4 decorated on carbon aerogel framework: Coupling microstructures synergistic effect for electromagnetic wave absorption Adv. Powder Technol. (IF 5.2) Pub Date : 2023-12-29 Zhengwei Ye, Qizhi Zhao, Kejun Wang, Jianjain Yang, Xiaoqiong Li
-
Influence of discharge energy on electromagnetic compaction characteristics of copper powders with same compression amount Adv. Powder Technol. (IF 5.2) Pub Date : 2023-12-29 Dongying Dong, Rui Wang, Weiying Huang, Xu Zhang, Guangyao Li, Junjia Cui
-
Investigation on enhancing classification of moist material by variable vibration intensity elastic screening Adv. Powder Technol. (IF 5.2) Pub Date : 2023-12-29 Shijie Yu, Peng Guo, Shijun Li, Miao Pan, Chenlong Duan, Haishen Jiang, Wenhao Li, Tong Xu, Wei Shi
-
pH-responsive prodrug containing Zr-based MOF and aldehyde-based drug; anionic hydrogel coating as a smart delivery system Adv. Powder Technol. (IF 5.2) Pub Date : 2023-12-29 Ehsan Binaeian, Sohrab Rohani
-
Novel method for the accurate calculation of Drucker–Prager cap model parameters and reduction of experimental time and effort Adv. Powder Technol. (IF 5.2) Pub Date : 2023-12-27 Tsubasa Sato, Naoto Morita, Etsuo Yonemochi, Kozo Takayama
-
Synthesis and application of dithiocarbamate oxadiazole thione for flotation separation of malachite from quartz and calcite Adv. Powder Technol. (IF 5.2) Pub Date : 2023-12-27 Shouxing He, Chengwang Wang, Zhihui Cheng, Xingshi Li, Ziwen Si, Yaoguo Huang, Linlin Chen, Yali Zhang
-
Suppression effect of nanocomposite inhibitor on Methane-Coal dust explosion flame propagation Adv. Powder Technol. (IF 5.2) Pub Date : 2023-12-27 Rui Guo, Chang Xu, Nan Li, Yuxiong Huang, Yansong Zhang, Xinyan Zhang
-
Enhanced flotation performance and adsorption mechanism on (0 0 2) crystal plane of fine muscovite powder Adv. Powder Technol. (IF 5.2) Pub Date : 2023-12-27 Liuyi Ren, Tianyi Ma, Shenxu Bao, Yimin Zhang, Ziwei Jiao, Xinyu Zhang
-
Effect of milling time on structural, physical and tribological behavior of a newly developed Ti-Nb-Zr alloy for biomedical applications Adv. Powder Technol. (IF 5.2) Pub Date : 2023-12-21 Fouzia Hamadi, Mamoun Fellah, Naouel Hezil, Dikra Bouras, Salah Eddine Laouini, Alex montagne, Hamiden Abd El-Wahed Khalifa, Aleksei Obrosov, Gamal A. El-Hiti, Krishna Kumar Yadav
-
Thin layer modeling the drying kinetics of titanium slag under microwave-assisted drying Adv. Powder Technol. (IF 5.2) Pub Date : 2023-12-19 Chunxiao Ren, Ju Zhou, Yanqiong Zhang, Mamdouh Omran, Lei Gao, Ju Tang, Fan Zhang, Guo Chen
-
Reduced-Order Model for Predicting the Performance of Small-Scale Unidirectional Cyclone Aerosol Separators Adv. Powder Technol. (IF 5.2) Pub Date : 2023-12-21 G. Dwars, C. Mehring
-
Evaluating the grinding performance of cutter-type disk mills using DEM-CFD simulations with a breakage model Adv. Powder Technol. (IF 5.2) Pub Date : 2023-12-20 Ryuto Kamo, Yuki Tsunazawa, Taketoshi Koita, Kyoko Okuyama, Motonori Iwamoto, Yasuyoshi Sekine, Chiharu Tokoro