当前期刊:
Journal of Applied Polymer Science
Go to
current issue
加入关注
本刊介绍/投稿指南
催更
样式: 排序: IF: - GO 导出 标记为已读
样式: 排序: IF: - GO 导出 标记为已读
-
Flexible, chemically bonded bismuth/tungsten-based polyvinyl alcohol-polyvinyl pyrrolidone composite for gamma and neutron shielding application J. Appl. Polym. Sci. (IF 3.0) Pub Date : 2024-03-17 Abhijit Bijanu, Rahul Arya, Gaurav Rajak, V. Sorna Gowri, Rahitashya Shil, Kaushik Banerjee, Sarmishtha Bhattacharyya, Supriya Mukhopadhyay, Sujoy Chatterjee, Raman Ravishankar, Shabi Thankaraj Salammal, Deepti Mishra
-
Enhancing shear strength in 3D printed single lap composite joints: A multi-faceted exploration of GNP integration, print orientation, utilizing artificial neural networks, and dynamic analysis J. Appl. Polym. Sci. (IF 3.0) Pub Date : 2024-03-17 Vinayak S. Hiremath, Mallikarjuna D. Reddy, Rajasekhara Mutra Reddy, Naveen J, R Prem Chand
-
Poly(O-Toluidine)-polyvinylpyrrolidone copolymer submerged MgFe2O4/CS-OXSWCNTs nanocomposite for removal of acid red dye from aqueous solutions J. Appl. Polym. Sci. (IF 3.0) Pub Date : 2024-03-17 Dina F. Katowah, Ahmed H. Sadek
-
Degradation kinetics of PLA compounds with castor oil J. Appl. Polym. Sci. (IF 3.0) Pub Date : 2024-03-17 Lorena Dantas, Amanda Araújo, Pedro Nicácio, Amanda Severo, Ananda Albuquerque, Matheus Souza, Carlos Luna, Edcleide Araújo, Renate Wellen
-
Toward the production of biopolyethylene-based ecocomposites with improved performance: The potential of eggshell particles as an ecological additive J. Appl. Polym. Sci. (IF 3.0) Pub Date : 2024-03-17 Elieber Barros Bezerra, Renate Maria Ramos Wellen, Carlos Bruno Barreto Luna, Eduardo da Silva Barbosa Ferreira, Emanuel Pereira do Nascimento, Edcleide Maria Araújo
-
Preparation of transparent electrospun nanofibrous membrane from long-persistent phosphor-reinforced polymer for security authentication J. Appl. Polym. Sci. (IF 3.0) Pub Date : 2024-03-17 Ghadah M. Al-Senani, Salhah D. Al-Qahtani
-
New perspectives on poly(lauryllactam) PA12: Optimization of process parameters for AROP of ω-lauryllactam J. Appl. Polym. Sci. (IF 3.0) Pub Date : 2024-03-16 Karima Ben Hamou, Ralf Bruning, Gabriel LaPlante, Marie-Hélène Thibault, Jacques Robichaud, Yahia Djaoued
-
Polyacrylonitrile and polyacrylonitrile/cellulose-based activated carbon nanofibers obtained from acrylic textile wastes for carbon dioxide capture J. Appl. Polym. Sci. (IF 3.0) Pub Date : 2024-03-16 Tuğçe Töngüç Yalçınkaya, Ahmet Çay, Çiğdem Akduman, E. Perrin Akçakoca Kumbasar, Jale Yanık
-
Study on the effect of chain extenders on aliphatic polyurethane and its application J. Appl. Polym. Sci. (IF 3.0) Pub Date : 2024-03-16 Wenhe Ding, Hongyan Liu, Yanyan Bo, Siqi Zhan, Zaiqian Yu, Yuting Zhang, Ruize Yuan, Shiwei Wang, Mingyao Zhang
-
Strategies for the fast optimization of the glass transition temperature of sustainable epoxy resin systems via machine learning J. Appl. Polym. Sci. (IF 3.0) Pub Date : 2024-03-16 Florian Rothenhäusler, Holger Ruckdaeschel
-
Pure chitosan multifilament yarns made using a semi‐industrial pilot scale wet‐spinning process with ionic liquids J. Appl. Polym. Sci. (IF 3.0) Pub Date : 2024-03-16 Irina Kuznik, Iris Kruppke, Hendrik Florian Pötzsch, Chokri Cherif
-
Crystallinity and mechanical properties of polypropylene products foamed by microcellular injection molding process J. Appl. Polym. Sci. (IF 3.0) Pub Date : 2024-03-16 Shengrui Yu, Senzhen Song, Huang Gao, Kai Wang, Lei Xu, Hao Guo, Wen Han, Jing You, Zhihuan Liu, Huamin Zhou
-
Editorial Board, Aims & Scope, Table of Contents J. Appl. Polym. Sci. (IF 3.0) Pub Date : 2024-03-16
-
Tuning the mechanical and thermomechanical properties through the combined effect of crosslinking and annealing in poly(lactic acid)/acrylonitrile‐EPDM‐styrene blends J. Appl. Polym. Sci. (IF 3.0) Pub Date : 2024-03-16 Carlos Bruno Barreto Luna, Eduardo Da Silva Barbosa Ferreira, Emanuel Pereira Do Nascimento, Adriano Lima Da Silva, Ananda Karoline Camelo De Albuquerque, Renate Maria Ramos Wellen, Edcleide Maria Araújo
-
Development of crosslinked polyvinyl alcohol nanofibrous membrane for microplastic removal from water J. Appl. Polym. Sci. (IF 3.0) Pub Date : 2024-03-16 Anandu Gopakumar Nair, Alexander Ccanccapa, Kati Bell, Maryam Salehi
-
A green mediated synthesis of glass fiber‐nickel ferrite‐ polyaniline ternary composite: An excellent thermal stability and outstanding electromagnetic interference shielding performance J. Appl. Polym. Sci. (IF 3.0) Pub Date : 2024-03-16 Shine R. Chandran, Raji R. Krishnan, Elizabath Johnson, K. H. Prema
-
Preparation and properties of cationic waterborne polyurethane/acrylate for fluorine‐free water repellents J. Appl. Polym. Sci. (IF 3.0) Pub Date : 2024-03-16 Yang Jiang, Chuanli Wang, Meng Liu, Biao Gu, Xiao Wang, Changhai Xu, Guowei Xiao, Dagang Miao, Jinmei Du
-
Synthesis and characterization of foams generated via gel state frontal polymerization J. Appl. Polym. Sci. (IF 3.0) Pub Date : 2024-03-16 John Daguerre‐Bradford, Daniel S. Camarda, Alan J. Lesser, Anna M. Cristadoro, Martin Linnenbrink, Markus Schütte
-
Preparation of a novel bio‐based aerogel with excellent hydrophobic flame‐retardancy and high thermal insulation performance J. Appl. Polym. Sci. (IF 3.0) Pub Date : 2024-03-16 Ruike Zhang, Yan Fu, Wangping Qin, Shuaishuai Qiu, Jie Chang
-
Multifunctional flexible strain sensor based on three‐dimensional core‐shell structures of silver nanoparticles/natural rubber J. Appl. Polym. Sci. (IF 3.0) Pub Date : 2024-03-16 Zihao Chen, Jinyu Sun, Ziwei Zhan, Yizhong Yuan, Xiaohui Tian, Jie Jin, Wangbao Wu, Kadier Ayikanbaier
-
The preparation of polypropylene microfiber yarns via vortex airflow‐assisted melt differential electrospinning J. Appl. Polym. Sci. (IF 3.0) Pub Date : 2024-03-16 Yuhang Wang, Jing Tan, Jinlong Xu, Haoyi Li, Weimin Yang
-
3D printing of cyanate ester resins with interpenetration networks for enhanced thermal and mechanical properties J. Appl. Polym. Sci. (IF 3.0) Pub Date : 2024-03-16 Saqlain Zaman, Sergio Favela, Nicolas E. Herrera, Alejandro Gandara, Laura Molina, Md. Sahid Hassan, Sofia Gabriela Gomez, Jean E. Montes Ramirez, Md. Shahjahan Mahmud, Ana C. Martinez, Alexis Maurel, Zhengtao Gan, Eric MacDonald, Yirong Lin
-
Cover Image, Volume 141, Issue 16 J. Appl. Polym. Sci. (IF 3.0) Pub Date : 2024-03-16 Yongliang Guo, Haojun Zhang, Jinfeng Cui, Junhong Guo, Baoping Yang
-
High‐performance ZSR/P(MMA/BA) composites with enhanced thermal and excellent water resistance properties J. Appl. Polym. Sci. (IF 3.0) Pub Date : 2024-03-15 Lijing Chen, Jianxin Wu, Yuxin Gu, Liang Liu, Yong Li, Xiaofeng Lin, Wenjing Lin, Lei Ji, Yanhong Peng, Guobin Yi
-
Study on the property of self‐reactive colloidal dust suppressant and the synergistic dust suppressant mechanism J. Appl. Polym. Sci. (IF 3.0) Pub Date : 2024-03-15 Wei Lu, Liman Liu, Jinliang Li, Yunlong Chen, Jinhu Li
-
Preparation of cresyl diphenyl phosphate‐loaded halloysite nanotube composite and its flame retardancy in epoxy resin J. Appl. Polym. Sci. (IF 3.0) Pub Date : 2024-03-15 Xiangliang Zhang, Yu Zhang, Xiaohong Li, Zhijun Zhang, Zhiwei Li
-
Construction of a hybrid flame retardant based on mesoporous silica for enhancing fire safety, smoke suppression, and mechanical properties of epoxy resins J. Appl. Polym. Sci. (IF 3.0) Pub Date : 2024-03-14 Liang Yue, Shuyang Shi, Shuxian Zheng, Yiwen Huang, Wenhui Rao, Chuanbai Yu
-
Antibacterial and cytotoxic performance of methenamine‐based poly(lactic acid)/poly(ethylene glycol) (PLA/PEG) composite films J. Appl. Polym. Sci. (IF 3.0) Pub Date : 2024-03-14 Merve Dandan Doganci, Erdinc Doganci, Huseyin Balci, Metin Cetin
-
New type of tri‐pyridyl inhibitor‐loaded polyaniline nanospheres for durable protection anticorrosion coatings J. Appl. Polym. Sci. (IF 3.0) Pub Date : 2024-03-13 Bingtao Bao, Jianhua Wu, Hao Liu, Mingjin Xue, Jianmin He, Hanzhong Ren, Yiting Xu, Birong Zeng, Weiang Luo, Lizong Dai
-
Biodegradable flexible conductive film based on sliver nanowires and PLA electrospun fibers J. Appl. Polym. Sci. (IF 3.0) Pub Date : 2024-03-13 Wei Peng, Liting Wang, Mingyu Zhang, Deng‐Guang Yu, Xiaoyan Li
-
Study on the synergistic effect of additives on the processing performance of UHMWPE/HDPE blends J. Appl. Polym. Sci. (IF 3.0) Pub Date : 2024-03-13 Jie Liu, Tongcheng Jin, Shengxue Qin, Hongbin Zhang, Haiping Zhou
-
Predicting the tensile and compressive modulus of electrospun fiber mat‐reinforced hydrogels using the Halpin–Tsai equations J. Appl. Polym. Sci. (IF 3.0) Pub Date : 2024-03-13 Laura E. Beckett, Jackson T. Lewis, Theresa K. Tonge, LaShanda T. J. Korley
-
Study on preparation and properties of polyacrylonitrile/jute microcrystalline cellulose ultrafiltration membranes J. Appl. Polym. Sci. (IF 3.0) Pub Date : 2024-03-13 Xing Li, Zhenguo Zhang, Meng Li, Chengqian Zhang, Zhengyong Liang
-
Electrochemical and semiconducting properties of multifunctional smart conductive fabrics based on polypyrrole J. Appl. Polym. Sci. (IF 3.0) Pub Date : 2024-03-13 F. Z. Engin Sagirli, T. Karazehir, A. S. Sarac
-
Flame retarded polyurethane vitrimers containing isocyanurate rings: Synthesis and properties J. Appl. Polym. Sci. (IF 3.0) Pub Date : 2024-03-13 Fansen Meng, Yiyin Yang, Kaiwen Shen, Donglin Tang
-
Novel polyurethane foam with low released heat for application in bone binder J. Appl. Polym. Sci. (IF 3.0) Pub Date : 2024-03-13 Gangwei Jiao, Yang Cao, Xiaodong Liu, Qiang Fu, Ning Gu, Ying Ren, Youyi Sun
-
A “one‐pot” method for synthesizing zinc tryptophan and its derivatives as highly efficient PVC thermal stabilizer with excellent mechanical properties J. Appl. Polym. Sci. (IF 3.0) Pub Date : 2024-03-13 Zhixuan Cui, Pingping Jiang, Yan Leng, Lyu Zhihao, Shan Feng, Xue Mei, Shijun Chen, Xunxun Sheng
-
Guar gum assisted synthesis of high‐quality silver nanoplates and their polyimide matrix nanocomposites for electromagnetic interference shielding applications J. Appl. Polym. Sci. (IF 3.0) Pub Date : 2024-03-12 Zahid Mehmood, Syed Aizaz Ali Shah, Saeed Omer, Ramsha Idrees, Aamna Bashir, Tahir Maqsood Qaisrani, Shaukat Saeed
-
Synthesis and tensile properties of biomass‐based cis‐1,4‐polybutadiene using erythritol‐derived 1,3‐butadiene as a monomer J. Appl. Polym. Sci. (IF 3.0) Pub Date : 2024-03-12 Tomoyuki Toda, Yuhi Sasakawa, Katsuhiko Takenaka, Kosuke Yamaguchi, Yoshinao Nakagawa, Kei Nishii, Yo Nakamura
-
Polyols and polyurethane foams based on chitosans of various molecular weights J. Appl. Polym. Sci. (IF 3.0) Pub Date : 2024-03-11 Anna Maria Strzałka, Bernardeta Dębska, Jacek Lubczak
-
Tuning of ultraviolet‐curable ink printability via in situ ultraviolet irradiation during direct ink write applications J. Appl. Polym. Sci. (IF 3.0) Pub Date : 2024-03-11 Sean Jackson, Lysette Zaragoza, Balaji Krisna Kumar, Tarik Dickens
-
Halogen‐free boron‐based hybrid system for enhancing flame retardancy, mechanical and thermal properties of epoxy J. Appl. Polym. Sci. (IF 3.0) Pub Date : 2024-03-11 Suheyla Kocaman, Melisa Temiz, Murat Işık, Gulnare Ahmetli, Ayhan Abdullah Ceyhan, Şeyma Karakaya
-
Correction to “Facile synthesis of cardanol‐based reactive diluents and application for anti‐shrinkage UV‐curable resins” J. Appl. Polym. Sci. (IF 3.0) Pub Date : 2024-03-11
S. Tong, Y. Hu, P. Jia, Y. Ma, Q. Huang, L. Hu, Y. Zhou, J. Appl. Polym. Sci. 2023, 140(45), e54653. https://doi.org/10.1002/app.54653. The first affiliation given in the article as “College of Science, Jiangsu Co-Innovation Center of Efficient Processing and Utilization of Forest Resources, Nanjing Forestry University, Nanjing People's Republic of China” was incorrect. This should have read: “College
-
Polar modification‐enhanced interfacial compatibility for high‐performance rubber blends J. Appl. Polym. Sci. (IF 3.0) Pub Date : 2024-03-11 Yihui Xu, Yudong Liu, Ling Liu, Jun Liu
-
Spark plasma sintering and mechanical properties of two grades of PEKK presenting different Tere/Iso ratios J. Appl. Polym. Sci. (IF 3.0) Pub Date : 2024-03-09 Anthony Heyer, Julie Rossit, Florence Moitrier, Georg Gütter, Nicolas Montmasson, Marc Wary, Fabian Delorme, Sebastien Lemonnier, Christophe Czarnota, Anthony Bracq
-
Fabrication of high‐performance acrylate grouting materials from tailor made magnesium acrylate solutions J. Appl. Polym. Sci. (IF 3.0) Pub Date : 2024-03-09 Daidong Wei, Kaipeng Zhu, Huizhi Li, Juanjuan Zeng, Shiqiang Li, Wei Xue
-
Novel protective coating based on the prepared Cu (II) and Co (II)‐containing linoleic poly(esteramide) as new anticorrosive and antimicrobial binders for industrial applications J. Appl. Polym. Sci. (IF 3.0) Pub Date : 2024-03-09 S. F. Hamza, M. M. Elsawy, Fatma H. Abdelsalam, Mohamed H. Sharaf, H. Abd El‐Wahab
-
Editorial Board, Aims & Scope, Table of Contents J. Appl. Polym. Sci. (IF 3.0) Pub Date : 2024-03-08
-
Characterization of hemicellulose‐carboxymethyl cellulose blend films: Enhancement of the physicochemical, thermal, and mechanical properties J. Appl. Polym. Sci. (IF 3.0) Pub Date : 2024-03-08 Nur Adilah Abu Hassan, Farah Fazlina, Leong Pui Teng, Mohamad Rawi Nurul Fazita, Cheu Peng Leh, Akihiko Kosugi, Takamitsu Arai, R. S. Chen, Mohamad Kassim Mohamad Haafiz
-
Production and properties of electrically conductive polymer composites reinforced with cotton threads J. Appl. Polym. Sci. (IF 3.0) Pub Date : 2024-03-08 Alexander P. Kondratov, Anastasiya V. Lozitskaya, Alex A. Volinsky
-
Improving dye removal ability and fouling resistance of thin‐film nanocomposite nanofiltration membranes using a new citric acid functionalized FSM‐16 mesoporous J. Appl. Polym. Sci. (IF 3.0) Pub Date : 2024-03-08 Ashkan Mohammadifar, Masoud Rahimi, Sirus Zinadini
-
Effect of interfacial sacrificial bonds on the vulcanization and mechanical properties of styrene butadiene rubber/talcum powder composites J. Appl. Polym. Sci. (IF 3.0) Pub Date : 2024-03-08 Qilai Wang, Guangyang He, Xianrong Shen, Houluo Cong, Bikuan Wang, Jianjian Tian, Yixin Xiang
-
Cover Image, Volume 141, Issue 15 J. Appl. Polym. Sci. (IF 3.0) Pub Date : 2024-03-08 Ashwini Shende, Ramalingam Chidambaram
-
Characterization of extruded films based on poly (butylene succinate) blends to utilize a partially degraded poly (butylene adipate‐co‐terephthalate) J. Appl. Polym. Sci. (IF 3.0) Pub Date : 2024-03-07 Pietro Carlos Gonçalves Conceição, Paulo Vitor França Lemos, Jamile Santos Santana, Paulo Romano Cruz Correia, Lucas Guimarães Cardoso, Denílson de Jesus Assis, Lucimar Pacheco Gomes da Rocha, Henrique Rodrigues Marcelino, Ederlan de Souza Ferreira, Jania Betânia Alves da Silva, Carolina Oliveira de Souza
-
Biodegradable polymer composite containing ground corn stalk modified with polydopamine J. Appl. Polym. Sci. (IF 3.0) Pub Date : 2024-03-07 Krzysztof Moraczewski, Krzysztof Szabliński, Daniel Łączny, Rafał Malinowski, Volodymyr Krasinskyi, Andrzej Trafarski, Tomasz Karasiewicz, Magdalena Stepczyńska, Piotr Rytlewski
-
Enhancing fracture toughness of carbon fiber/epoxy composites using polyphenylene ether as a modifier J. Appl. Polym. Sci. (IF 3.0) Pub Date : 2024-03-07 Naveen Veeramani, Machar Devine, James A. Quinn, Arun Kumar Alapati, Alp Bolluk, Dipa Ray
-
A waterborne polyurethane‐based noise‐reducing material and factors influencing its damping and noise‐reducing performance J. Appl. Polym. Sci. (IF 3.0) Pub Date : 2024-03-07 Xingchi Wu, Xuejuan Cao, Chengcheng Miao, Ying Yuan, Xiaoyu Yang, Li Shu
-
Imidazolium‐based ionic thermoplastic polyurethane with low surface energy and antibacterial activities J. Appl. Polym. Sci. (IF 3.0) Pub Date : 2024-03-07 Jie Sun, Yue Zhao, Zhiqian Xu, Zhen Ge
-
Experimental investigation of regenerated cellulose microdialysis probe sterilization J. Appl. Polym. Sci. (IF 3.0) Pub Date : 2024-03-06 Swayamdipta Bhaduri, Tse‐Ang Lee, Jessie Peng, Maarig Qureshi, Rueben A. Gonzales, Tanya Hutter
-
A facile strategy for preparing of cross‐linkable natural fibers based on a Schiff base reaction J. Appl. Polym. Sci. (IF 3.0) Pub Date : 2024-03-06 Yanhong Feng, Guangliang Liu, Yong Liang, Bo Lei