-
‘Ball-on-plane’ ZnS@RGO compound filler: effect on tribological properties of thermosetting polyimide film Compos. Interfaces (IF 2.6) Pub Date : 2024-02-25 Hong Liu, Zenghong Qi, Hongding Wang, Jiaojiao Huang, Yanlong Zhao, Yizhao Yang, Zigeng Zhao
In this study, a compound filler consisting of zinc sulfide (ZnS) nanoparticles and reduced graphene oxide (RGO) was synthesized using the hydrothermal method and utilized to enhance the tribologic...
-
Enhancing thermal conductivity of spherical boron nitride/silicone rubber composites by matching interfacial modulus Compos. Interfaces (IF 2.6) Pub Date : 2024-02-20 Yu Fang, Jian Xie, Shiyu Qin, Xuhua Wang, Jie Yang, Shan Wang, Chuanxi Xiong
Lightweight, electrically insulating and high thermally conductive materials are highly desirable in electronic and power systems because they can effectively transfer heat and avoid temperature ri...
-
Deposition voltages on the phase evolutions, microstructures, and oxidation behaviors of thermal-resistance Glass-MoSi2-SiC coating Compos. Interfaces (IF 2.6) Pub Date : 2024-02-20 Xinzi Zhong, Liyun Cao, Hang Yan, Jianfeng Huang, Yijun Liu, Xuetao Shen, Yong Zhao, Zhiwen Cheng, Ting Liu
Due to the high oxidation activities at high temperatures, traditional SiC coating was difficult to act as an antioxidant material for ages. In this case, the multilayered Glass-MoSi2-SiC coating w...
-
Morphological, compatibility, rheological and mechanical properties of graphene oxide/PLA/XNBR-g-GMA/XNBR: empirical and theoretical approaches Compos. Interfaces (IF 2.6) Pub Date : 2024-02-12 Adel Soleimani, Mohammad Javad Azizli, Mohammad Barghamadi, Katayoon Rezaeeparto, Somayeh Parham, Mohammad Reza Kianfar, Mohammad Hashemi
The incompatible thermoplastic poly lactic acid/carboxylated acrylonitrile butadiene rubber (PLA/XNBR) was prepared, and the effect of graphene oxide (GO) as a reinforcement and glycidyl methacryla...
-
Synthesis of polysaccharide/polyaniline composites by sol–gel method Compos. Interfaces (IF 2.6) Pub Date : 2024-02-05 Ryo Miyashita, Kyoka Komaba, Takuya Yonehara, Hiromasa Goto
In this study, we report a novel synthesis technique for polysaccharides and conducting polymer composites. A series of polysaccharide/polyaniline composites were prepared via double-step polymeriz...
-
Molecular dynamics for optimizing interfacial properties of carbon fiber-reinforced polycarbonate: molecular conformation Compos. Interfaces (IF 2.6) Pub Date : 2024-02-04 Chenyang Zhang, Hanke Dai, Yonggen Lu
Molecular dynamic simulation along with experiments was used to study polycarbonate (PC) molecular conformation on composite interfacial properties. The interlaminar shear strength (ILSS) variation...
-
Interfacial shear strength and durability analysis of carbon fiber/rubber conductive composites for snow melting on bridge decks Compos. Interfaces (IF 2.6) Pub Date : 2024-01-29 Shuanye Han, Zaifeng Yao, Huihao Jiang, Huilai Qin, Liulian Li, Xiaochuan Hu
As a conductive material for snow melting on bridge decks, the interfacial shear strength of carbon fiber/rubber conductive composites is a prerequisite for engineering applications. The interfacia...
-
Control of halloysite nanotubes localization into a LLDPE/EVA (70/30) blend through specific chemical modifications and sequence of mixing during extrusion Compos. Interfaces (IF 2.6) Pub Date : 2024-01-29 Euphrasie Jasinski, Noëllie Ylla, Aurélie Taguet, Véronique Bounor-Legaré, Pierre Alcouffe, Emmanuel Beyou
The control of the localization of halloysite nanotubes (HNT) in a linear low-density polyethylene/ethylene-vinyl acetate copolymer (LLDPE/EVA, 70/30) blend was studied through three approaches: i)...
-
Investigation of the effect of thermal, mechanical, and morphological properties of bio-composites prosthetic socket Compos. Interfaces (IF 2.6) Pub Date : 2024-01-29 Noor K. Faheed, Qahtan A. Hamad, Rasha Abdul-Hassan Issa
One of the major alternatives for lasting prosperity is the use of biodegradable natural fiber as reinforcements in the production of composites to tackle worldwide environmental problems. This stu...
-
Effect of Ni addition on the behavior of dissimilar A356-AZ91/CeO2 aluminum-magnesium based composite fabricated by friction stir process technique Compos. Interfaces (IF 2.6) Pub Date : 2024-01-29 Shashi Prakash Dwivedi, Shubham Sharma
In the present study, the Behavior of Dissimilar A356-AZ91/CeO2 Aluminum-Magnesium Based Composite Fabricated by Friction Stir Process Technique was observed. The Macrostructure of A356-AZ91/5%CeO2...
-
Moisture resistance treatments of natural fiber-reinforced composites: a review Compos. Interfaces (IF 2.6) Pub Date : 2024-01-15 Dheeraj Gunwant
This article extensively explores moisture resistance treatments for natural fiber-reinforced composites (NFRCs), aiming to mitigate the hindrance posed by their high moisture absorption and limite...
-
Enhanced interfacial and mechanical properties of carbon fabric/PA12 composites via grafting silanized nano hexagonal boron nitride onto the fibers Compos. Interfaces (IF 2.6) Pub Date : 2024-01-11 Reyhan Ozbas, Mustafa Dogu, Emek Moroydor Derun
The purpose of this work was to create thermoplastic composites based on carbon fiber fabric reinforced enhanced mechanical and interfacial properties, based on PA12 (polyamide 12). In line with th...
-
Effect of Hexagonal Boron Nitride on Morphology, crystallinity and internal Exfoliation properties of Polypropylene melt and solid phases Compos. Interfaces (IF 2.6) Pub Date : 2024-01-11 Nusret Kaya, Merve Karaman
Polypropylene (PP) is one of the most important polymers widely used in different industries due to its many superior properties. Hexagonal boron nitride (hBN) is generally used in the electronic p...
-
Integrating machine learning and response surface methodology for analyzing anisotropic mechanical properties of biocomposites Compos. Interfaces (IF 2.6) Pub Date : 2024-01-02 S Saravanakumar, S Sathiyamurthy, P Pathmanaban, P Devi
This study enhances the anisotropic mechanical properties of banana fiber-epoxy composites by optimizing fiber loading, orientation, and treatment using Response Surface Methodology (RSM) and Artif...
-
Effect of plasma treatment on high temperature interfacial properties of Chinese-made T800 CFRP Compos. Interfaces (IF 2.6) Pub Date : 2023-12-25 Xingda Liu, Guoqing Zhen, Ping Chen
The surface of Chinese-manufactured T800 carbon fiber (CF) underwent air ICP plasma treatment to enhance its interfacial bonding with polyimide resin at high temperatures. This treatment significan...
-
Investigating the effect of recycled irregular metallic particles embedment on the interlaminar strength of polyamide-based composites Compos. Interfaces (IF 2.6) Pub Date : 2023-12-26 Vahid Zal, Hassan Taherian, Mehdi Yasaee
In this research, for the first time, the effect of embedding irregular and jagged steel particles of recycled milling dendritic chips on the improvement of compressive and interlayer strength of t...
-
An embedded machine learning strategy for analyzing interfacial characteristics in impact welding of dissimilar alloys Compos. Interfaces (IF 2.6) Pub Date : 2023-12-21 Arif Sari, Candra Zonyfar, Shavan Askar, Sherzod Abdullaev, Raaid Alubady, M. K. Sharma
In this study, a novel embedded machine learning (ML) framework was employed to analyze interfacial characteristics in dissimilar-alloy impact welding. While keeping the substrates constant, i.e., ...
-
Effect of curing regimes on the rheological, mechanical, hydration and microstructure of ultra-high-performance concrete (UHPC) using indigenous resources: progress towards sustainable construction practices Compos. Interfaces (IF 2.6) Pub Date : 2023-12-19 Sathya Sai Regalla, N. Senthil Kumar
Ultra-High-Performance Concrete (UHPC) was renowned for its exceptional mechanical strength and durability. While contemporary UHPC is made using high-quality materials and equipment, its enormous ...
-
Weathering of compatibilized poly(hydroxybutyrate)/agave fiber biocomposites produced by different mixing methods Compos. Interfaces (IF 2.6) Pub Date : 2023-12-19 A. A. Pérez-Fonseca, L. V. Urista, A. Barajas-Cervantes, M. Arellano, D. Rodrigue, J. R. Robledo-Ortíz
The continuous growth in the biopolymers market underscores the necessity to develop and characterize novel materials to replace conventional polymers. This study evaluated the effect of the proces...
-
Functionalized nanoclays in bioactive materials Compos. Interfaces (IF 2.6) Pub Date : 2023-12-07 Anjali Nisha, Rahul Bhardwaj, Mohini Verma, Amitabha Acharya
The therapeutic potential of natural clays has long been known and used as a remedy for various ailments. Due to their thin layered structure, charged, biocompatiblity and specific compositions, na...
-
Metallurgical and corrosion characteristics of AA7075 alloy reinforced with Nickel foam Compos. Interfaces (IF 2.6) Pub Date : 2023-12-06 Sadhu Karthik, Kothapelli Varun Krishna, D. Anirudha, S. Vignesh, R. Vaira Vignesh
The current work investigates the metallurgical and corrosion characteristics of the interface between Nickel foam and AA7075 alloy. Nickel foam is conjoined with AA7075 alloy (composite) through a...
-
Mechanical and conductivity properties of 6061Al matrix composites reinforced with different pH Cu-coated graphene Compos. Interfaces (IF 2.6) Pub Date : 2023-11-26 Ming Lei, Ting Zhou, Jing Xu, Qiufen Tu, Lijun Zhou, Yong Zhao
The lightweight designs of automobiles and space shuttles have raised the bar for aluminum (Al) and its alloys. Graphene (GP) has found widespread application in aluminum matrix composites due to i...
-
Synthesis of new quinoline derivatives based on mono-functional polybenzoxazines for oil-water separation, anti-corrosion and antibacterial applications Compos. Interfaces (IF 2.6) Pub Date : 2023-11-29 Kumar Selvaraj, Marisa E. Spontón, Hariharan Arumugam, Sathish Kumar Kannaiyan, Chandramohan Ayyavu, Agustín Forchetti Casarino, Diana A. Estenoz, Hamad Al-Lohedan, Manimaran Kumar, Ranjith Balu, Dinakaran Kannaiyan
In the present work, novel and effective quinoline-based polybenzoxazines coatings were prepared on cotton fabrics and mild steels to improve the hydrophobic properties and corrosion resistance, re...
-
Progress in surface modification preparation, interface characterization and properties of continuous carbon fiber reinforced polymer matrix composites Compos. Interfaces (IF 2.6) Pub Date : 2023-11-14 Yu Chen, Jian Mao, Bo Qian, Man Zhao
Additive manufacturing technology brings new revolutionary potential for the development of carbon fiber reinforced polymer composites. Continuous carbon fiber reinforced composites developed using...
-
Effect of alkali-treated bamboo fibers on the properties of asphalt mixture Compos. Interfaces (IF 2.6) Pub Date : 2023-11-08 Li Xiang, Yanping Sheng, Dahui Xu, XiDong Duan, Haichuan Jia, Shian Cui, Bohan Sheng
Bamboo fiber is a natural fiber that is ecologically beneficial and one of the best materials to replace lignin fiber for roads, which is still difficult to utilize properly in asphalt mixtures owi...
-
Effect of explosive welding on the interface characteristics of S32750/Q245R composite plate Compos. Interfaces (IF 2.6) Pub Date : 2023-10-26 Yong Ma, Mengwei Kong, Tao Wang, Guoping Wang, Zhongjia Chen, Song Zhang, Chengsheng Chu
Super duplex stainless steel S32750 has excellent corrosion resistance. It is combined with carbon structural steel Q245R through explosive welding, not only with good mechanical properties but als...
-
Ferroelectric, dielectric, and EMI attenuation characteristics of BaFe2O4/MWCNTs/epoxy nanocomposites Compos. Interfaces (IF 2.6) Pub Date : 2023-10-25 Shivali Meena, Neelam Kumari, Vishant Gahlaut, Chander Shekhar, Supratim Mitra, Umesh Kumar Dwivedi
This study reports the synthesis of barium-ferrite (BaFe2O4) particles by co-precipitation method, which is employed to prepare BaFe2O4/multiwall carbon nanotubes (MWCNTs)/epoxy nanocomposites. Fur...
-
Complex TiC-Ni-based composites joined to steel support by thermal explosion under load: synthesis, microstructure and tribological behavior Compos. Interfaces (IF 2.6) Pub Date : 2023-10-19 Samia Lemboub, Azzedine Boudebane, Said Boudebane, Amel Bourbia, Samiha Mezrag, Francisco José Gotor
The combustion in thermal explosion mode of reactive mixtures of Ti–Ni–graphite(carbides, borides, oxides), under load, was used to produce complex composite materials, densified and joined to a C5...
-
Enhancing the interfacial strength of jute fiber/polylactic acid composites via surface carboxymethylation pretreatment and in situ growth of ZnO nanorods Compos. Interfaces (IF 2.6) Pub Date : 2023-10-19 Mengjuan Sun, Tong Yu, Haoran Zhang, Yun Yang, Danni Wang, Yihua Cui, Jinfeng Wang, Lei Pan
Jute fibers (JFs) are considered an excellent reinforcement due to their abundant resources, environmental friendliness, low cost, lightweight, high specific strength and high specific modulus. How...
-
A review of spark erosion machining efficiency, characterization and optimization techniques for ceramic composites Compos. Interfaces (IF 2.6) Pub Date : 2023-10-19 L. Selvarajan, K Venkataramanan, K.P. Srinivasa Perumal, Mohammed Yunus, Rami Alfattani, A. Aravindhan
The domain of material science has made great strides in recent years, especially in the fields of metallurgy and ceramic materials and the production of highly trustworthy, cost-effective and econ...
-
Large-scale dispersion of the hierarchical (1D, 2D and 3D) carbonaceous nanofillers in thermoplastic polyurethane through supramolecular self-assembly and extrusion Compos. Interfaces (IF 2.6) Pub Date : 2023-10-15 Subhash Mandal, Debmalya Roy, Kingsuk Mukhopadhyay, Mayank Dwivedi, Mangala Joshi
The hierarchical carbonaceous nanofillers viz. carboxylated multiwalled carbon nanotube (MWCNT-COOH as 1D), hydroxylated few-layer graphene (FLG-OH as 2D), and hybrid 3D i.e., MWCNT-COOH immobilize...
-
Influence of irregular fibre surface and debonding on the elastic properties of jute/epoxy composites: Micromechanics and finite element approaches Compos. Interfaces (IF 2.6) Pub Date : 2023-10-04 Prasanthi Phani, Raghavendra Gujjala, Shakuntala Ojha, Aswani Kumar Bandaru
This study examines how irregular surfaces and debonding affect jute/epoxy composites. The study used micromechanics and finite element (FE) analysis to investigate properties such as elastic modul...
-
Superhydrophobic fluorescent micro-/nano-composites from carbon dots encapsulated in CaCO3-SiO2 Compos. Interfaces (IF 2.6) Pub Date : 2023-10-03 Yurong Wang, Lian Jiang, Baohe Li, Yitong Ma, Yiwen Zeng, Donghong Yu, Nong Wang
In this paper, polyamine-functionalized carbon dots (CDs) were synthesized by means of low temperature (<100°C) carbonization of citric acid at the presence of polyethylenimine (PEI), resulting sph...
-
Direct ink writing of high-performance multi-level interlocked laminate-network titanium matrix composites Compos. Interfaces (IF 2.6) Pub Date : 2023-10-02 Zhenqiang Liu, Yujia Gu, Hao Yang, Yun Wang, Weili Liu, Chao Yu, Ruitao Li
In this study, multi-level laminate-network boron nitride nanosheets (BNNSs)/TC4 composite with interlayer interlocking was fabricated using a facile direct ink writing (DIW) technique. In-situ 3D ...
-
Roles of different organic-inorganic hybrid interfaces in enhancing the mechanical properties of continuous basalt fiber/epoxy composites Compos. Interfaces (IF 2.6) Pub Date : 2023-09-29 Zhenhan Yan, Shengchang Zhang, Yingying Zhao, Qibin Xu, Mengjin Jiang, Pengqing Liu, Shiyi Zhou
In order to enhance the interfacial adhesion between continuous basalt fibers (CBFs) and epoxy (EP) matrix and the mechanical properties of resultant composites, the organic – inorganic hybrid comp...
-
Improving mechanical properties of high-temperature resistant carbon fiber/phthalonitrile composites via surface modification: a comparative study on modification methods Compos. Interfaces (IF 2.6) Pub Date : 2023-09-26 Changping Yin, Yefan Zhang, Wei Liao, Jiao Liu, Nan Wu, Suli Xing, Jun Tang
The interfacial bonding is of essential importance for the mechanical properties of high-temperature resistant carbon fiber/phthalonitrile composite materials. To promote the interfacial adhesion o...
-
Bio-based composites made from bamboo fibers with high lignin contents: a multiscale analysis Compos. Interfaces (IF 2.6) Pub Date : 2023-09-05 Cécile Sillard, Eder Castro, Jerachard Kaima, Quentin Charlier, Jérémie Viguié, Maxime Terrien, Ittichai Preechawuttipong, Robert Peyroux, Evelyne Mauret, Alain Dufresne
To meet societal and economic expectations, the bio-based composite market is developing. However, some issues remain, especially for lignocellulosic fiber composites, due to their highly hydrophil...
-
Enhancing the flexural properties of CFRP with vacuum-assisted deposition of cellulose microfibrils to create a multiscale reinforcement network Compos. Interfaces (IF 2.6) Pub Date : 2023-08-25 F.J. Goyo-Brito, M. A. Pereira-da-Silva, J.R. Tarpani
Carbon fiber (CF) was coated with micro-fibrillated cellulose (MFC) using vacuum-assisted deposition in aqueous suspensions at concentrations of 0.1%, 0.2%, and 0.4%. The impact of distribution mes...
-
Formation characteristics and properties of an explosion-welded steel–aluminum composite with a diffusion barrier Compos. Interfaces (IF 2.6) Pub Date : 2023-08-24 V. I. Kuz’min, V. I. Lysak, S.V. Kuz’min, E.V. Kuz’min
This paper presents a study of the formation characteristics and properties of an explosion-welded steel – aluminum composite with a chromium layer diffusion barrier. The identified characteristics...
-
Atmospheric plasma spray coating of antibacterial nano silver-hydroxyapatite on titanium surface for biomedical applications Compos. Interfaces (IF 2.6) Pub Date : 2023-08-24 Uğursoy Olgun, Hülya Çetin, Ayşegül Hoş, Mustafa Gülfen, Fatih Üstel
In this paper, the nanosilver particles were deposited onto the hydroxyapatite (HAP) microparticles and the obtained nanoAg-HAP particles were coated onto the Ti metal surface using the atmospheric...
-
Surface modification and dispersity of chopped carbon fiber and its effects on mechanical properties of gypsum-based composite materials Compos. Interfaces (IF 2.6) Pub Date : 2023-08-13 Zhenzhen Zhi, Yanfei Guo, Qiujie Liu, Zihao Jin, Binbin Dong, Xiaohong Ru, Yujiang Wang
Gypsum-based composites are recognized as environmentally friendly and efficient materials suitable for modern construction. The mechanical properties of gypsum-based composites are crucial for det...
-
Microstructure and tensile properties of high-entropy alloy Al0.5CoCrFeNi particles reinforced Ti/Al laminated composite Compos. Interfaces (IF 2.6) Pub Date : 2023-07-28 Enhao Wang, Lisong Lv, Fuwei Kang, Shangzhuo Li, Chunfa Lin, Yuqiang Han, Jiaqi Li, Xiaogang Song, Wei Jiang
Novel Ti/Al laminated composite embedded with particles of the high entropy alloy Al0.5CoCrFeNi were produced by vacuum hot press sintering at 650°C. The microstructure of the laminated composite w...
-
Fire-retardant acrylic coating by silica -coated limestone (SCL) microencapsulation Compos. Interfaces (IF 2.6) Pub Date : 2023-07-26 Emeka Michael Madiebo, Chigozie Francolins Uzoh, Okechukwu Dominic Onukwuli
Silica-coated limestone (SCL) microcapsule was synthesized and successfully introduced into acrylic resin to produce fire-retardant coatings. SCL microcapsules were prepared by encapsulating limest...
-
Influence of hydrothermal carbon interphase on mechanical properties of Cf/SiBCN mini-composites after high-temperature treatment Compos. Interfaces (IF 2.6) Pub Date : 2023-07-25 Haobo Jiang, Jinping Cui, Kang Guan, Pinggen Rao
To investigate the influence of hydrothermal carbon (HTC) interphase on the high-temperature performances of Cf/SiBCN composites, the mechanical properties of Cf/SiBCN mini-composites with HTC inte...
-
On the laser surface pre-treatment to enhance the surface texture, wettability and adhesion bonding strength of aluminium 7075-T6 laminates Compos. Interfaces (IF 2.6) Pub Date : 2023-07-12 Zige Xu, Wen Yip, Zheng Dong, Mohammad Uddin, Graham Stevens
In this study, a laser surface pre-treatment strategy was applied to aluminium 7075-T6 alloy, in which the laser power, speed and frequency were varied to determine the best modified surface proper...
-
Effective interactions and dielectric study of polymer nanocomposite thin films of polyvinylidene fluoride and graphene oxide Compos. Interfaces (IF 2.6) Pub Date : 2023-07-10 Feba Anna John, Paulose Thomas, George Jacob, Ajith James Jose
Polyvinylidene fluoride (PVDF) is a well-known fluoropolymer for its electronic applications. The present work investigates the influence of Graphene oxide (GO) in various weight percentages over t...
-
Carboxy styrene-butadiene latex and PVA fiber co-modified rubber concrete - experiment and molecular dynamics simulation Compos. Interfaces (IF 2.6) Pub Date : 2023-07-05 Weijian Wang, Yong Feng, Lijuan Li, Siqi Wang, Chen Zhao
Rubber concrete (RC) is a new environmentally friendly composite material, there are many weak interfaces and pores inside it, which degrade its mechanical properties. To address this problem, this...
-
Graphene oxide, it’s surface functionalisation, preparation and properties of polymer-based composites: a review Compos. Interfaces (IF 2.6) Pub Date : 2023-06-29 Ankita Subhrasmita Gadtya, Debajani Tripathy, Lipeeka Rout, Srikanta Moharana
Graphene’s large surface area, superior thermal conductivity, rapid electron mobility, and great Young’s modulus make it an ideal nano-structured material for use as filler. As a result of their am...
-
Silver and copper nanowire-based nanocomposite for transparent electrodes: deposition methods and applications in solar cells Compos. Interfaces (IF 2.6) Pub Date : 2023-06-29 Esther Dimngaihvungi, Manjeet Singh, Balaram Pani, Ashish Kumar Singh
The solution-phase fabrication of photovoltaic cells has drawn a wide attention in the area of flexible electronics owing to their cost-effective and easy fabrication methodology. In addition to th...
-
Impact of hemp woody core surface chemical modification on wettability of epoxyurethane composites Compos. Interfaces (IF 2.6) Pub Date : 2023-06-26 Tetiana Samoilenko, Larysa Yashchenko, Nataliia Yarova, Oleksandr Brovko
Hemp woody core (HWC) that is a by-product of hemp industry was subjected to pre-treatment with alkali (mercerisation) and further functionalisation with epoxidised soybean oil (ESO) or (3-aminopro...
-
Nanoclay/organic filler-reinforced polymeric hybrid composites as promising materials for building, automotive, and construction applications- a state-of-the-art review Compos. Interfaces (IF 2.6) Pub Date : 2023-06-18 Lucky Ogheneakpobo Ejeta
Several research articles in the field of nanocomposite have revealed that organic fillers can be used as reinforcing agents for plastic materials in hybrid material production. Advancement in mult...
-
Improved amine functionalization of carbon fiber surfaces by O2 plasma activation treatment Compos. Interfaces (IF 2.6) Pub Date : 2023-06-09 Zefeng Yang, Xuefei Huang, Jie Li, Bo Tang, Guizao Huang, Wenfu Wei, Guangning Wu
Pretreatment using O2 plasma is a commonly used method today to increase the surface activity of CFs and enable more functional groups to be grafted onto them. Although the oxidation treatment of t...
-
Enhanced interfacial interaction, mechanical properties and thermal stability of basalt fiber/epoxy composites with multi-scale reinforcements Compos. Interfaces (IF 2.6) Pub Date : 2023-06-02 Dong Xiang, Tao Shui, Hongjuan Qiao, Wei Tan, Eileen Harkin-Jones, Jie Zhang, Peizhi Ji, Ping Wang, Bin Wang, Chunxia Zhao, Hui Li, Yuanpeng Wu, Yuntao Li
In this work, epoxy (EP) resin composites with multi-scale reinforcements were prepared by hand lay-up and hot-pressing. The epoxy was reinforced with basalt fibers (BF) modified with a silane coup...
-
Statement of Retraction: Simultaneously enhanced interfacial, mechanical properties and flame retardancy of high-density polyethylene-based composites using Mg,Al-containing melamine polyphosphate-grafted wood fibers Compos. Interfaces (IF 2.6) Pub Date : 2023-06-01
Published in Composite Interfaces (Vol. 30, No. 12, 2023)
-
Improving interface interactions in PLA/HAP composites with hydroxyapatite surface modification Compos. Interfaces (IF 2.6) Pub Date : 2023-05-23 Eylül Odabaş, Esin Akarsu
PLA/HAP composites have attracted significant attention in material science, especially in the field of biomaterials. However, these composites have suffered from unfavorable interface interactions...
-
Molecular dynamics study on the transport of water molecules and chloride ions in graphene oxide-modified cement composites Compos. Interfaces (IF 2.6) Pub Date : 2023-05-23 Yu Chen, Wenjie Zhang, Linlong Zhen, Guohao Li
The ability of composite cement materials to resist erosion by chloride ions is a critical factor in evaluating their dependability. This study aims to examine the influence of graphene oxide on th...
-
Fabrication, characterization and performance analysis of different Ag/PVA nanocomposite membranes for debenzenation of model pyrolysis gasoline using pervaporation Compos. Interfaces (IF 2.6) Pub Date : 2023-05-19 Monalisha Samanta, Debarati Mitra
According to EURO IV and EURO V, benzene in gasoline should not exceed 1 volume%, to prevent environmental pollution and health risks; hence benzene must be removed from pyrolysis gasoline (octane ...
-
Study on wettability behavior and wear resistance mechanism of ZTA-ceramic-reinforced HCCI composites Compos. Interfaces (IF 2.6) Pub Date : 2023-05-17 Quan Gao, Zhenlin Lv, Lei Jia, Chaoyang Zhang
Zirconia-toughened alumina (ZTA)-reinforced high-chromium cast iron (HCCI) composite materials were prepared using pressureless sintering method, and the effects of the type (titanium (Ti), nickel ...
-
Improved properties of Al matrix composites reinforced with Ni-coated β-Si3N4 whiskers Compos. Interfaces (IF 2.6) Pub Date : 2023-05-11 Fayu Li, Jinwei Yin, Dongxu Yao, Yongfeng Xia, Hanqin Liang, Yu-Ping Zeng
ABSTRACT In order to enhance the interfacial bonding between aluminum and β-Si3N4 whiskers in Al matrix composites (AMCs), Ni coating was deposited on the surface of β-Si3N4 whiskers using an electroless plating method. The interfacial test results showed that Ni coating was successfully deposited on the surface of β-Si3N4 whiskers and the whiskers were well bonded with Al matrix without pores. In
-
Study of the effect of phase state on the interfacial thermal conductance between PCMs and ceramic skeletons Compos. Interfaces (IF 2.6) Pub Date : 2023-05-08 Tong Zhang, Fangyuan Sun, Libing Zheng, Dazheng Wang, Yanhui Feng
Composite phase change materials with sugar alcohol as the phase change material and highly thermally conductive ceramics as the porous skeleton are widely used in various thermal storage systems. ...